Here dmesg output. I have tried to do steps as you explained. [ 0.000000] microcode: microcode updated early to revision 0x20, date = 2018-04-10 [ 0.000000] Linux version 4.19.0-041900rc7-generic (kernel@kathleen) (gcc version 8.2.0 (Ubuntu 8.2.0-7ubuntu1)) #201810071631 SMP Sun Oct 7 16:33:10 UTC 2018 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-041900rc7-generic root=UUID=aed0a586-4802-41ed-b85a-dce4c8765b14 ro quiet splash vt.handoff=7 usbcore.dyndbg=+p [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a9a6dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a9a6e000-0x00000000aa976fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000aa977000-0x00000000aa999fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aa99a000-0x00000000aa99efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000aa99f000-0x00000000af2befff] usable [ 0.000000] BIOS-e820: [mem 0x00000000af2bf000-0x00000000af6befff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000af6bf000-0x00000000af7befff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000af7bf000-0x00000000af7fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: TOSHIBA SATELLITE L855/Portable PC, BIOS 6.70 04/15/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2394.782 MHz processor [ 0.002492] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002494] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002502] last_pfn = 0x44f000 max_arch_pfn = 0x400000000 [ 0.002507] MTRR default type: uncachable [ 0.002508] MTRR fixed ranges enabled: [ 0.002509] 00000-9FFFF write-back [ 0.002510] A0000-BFFFF uncachable [ 0.002511] C0000-E7FFF write-protect [ 0.002511] E8000-EFFFF write-combining [ 0.002512] F0000-FFFFF write-protect [ 0.002513] MTRR variable ranges enabled: [ 0.002514] 0 base 000000000 mask F80000000 write-back [ 0.002515] 1 base 080000000 mask FC0000000 write-back [ 0.002516] 2 base 0AF800000 mask FFF800000 uncachable [ 0.002517] 3 base 0B0000000 mask FF0000000 uncachable [ 0.002518] 4 base 0FF800000 mask FFF800000 write-protect [ 0.002519] 5 base 100000000 mask F00000000 write-back [ 0.002520] 6 base 200000000 mask E00000000 write-back [ 0.002521] 7 base 400000000 mask F80000000 write-back [ 0.002521] 8 base 44F000000 mask FFF000000 uncachable [ 0.002522] 9 base 450000000 mask FF0000000 uncachable [ 0.003338] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003483] last_pfn = 0xaf800 max_arch_pfn = 0x400000000 [ 0.014624] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [(____ptrval____)] [ 0.014964] Scanning 1 areas for low memory corruption [ 0.014966] Base memory trampoline at [(____ptrval____)] 97000 size 24576 [ 0.014972] BRK [0x171001000, 0x171001fff] PGTABLE [ 0.014974] BRK [0x171002000, 0x171002fff] PGTABLE [ 0.014975] BRK [0x171003000, 0x171003fff] PGTABLE [ 0.015022] BRK [0x171004000, 0x171004fff] PGTABLE [ 0.015024] BRK [0x171005000, 0x171005fff] PGTABLE [ 0.015144] BRK [0x171006000, 0x171006fff] PGTABLE [ 0.015224] BRK [0x171007000, 0x171007fff] PGTABLE [ 0.015237] BRK [0x171008000, 0x171008fff] PGTABLE [ 0.015281] BRK [0x171009000, 0x171009fff] PGTABLE [ 0.015354] BRK [0x17100a000, 0x17100afff] PGTABLE [ 0.015468] BRK [0x17100b000, 0x17100bfff] PGTABLE [ 0.015534] BRK [0x17100c000, 0x17100cfff] PGTABLE [ 0.015771] RAMDISK: [mem 0x31b58000-0x34da3fff] [ 0.015779] ACPI: Early table checksum verification disabled [ 0.016005] ACPI: RSDP 0x00000000000FE020 000024 (v02 TOSINV) [ 0.016009] ACPI: XSDT 0x00000000AF7FE210 0000AC (v01 TOSINV TOSINV00 00000001 01000013) [ 0.016015] ACPI: FACP 0x00000000AF7FB000 00010C (v05 TOSINV TOSINV00 00000001 ACPI 00040000) [ 0.016021] ACPI: DSDT 0x00000000AF7EF000 008404 (v01 TOSINV TOSINV00 00000000 ACPI 00040000) [ 0.016024] ACPI: FACS 0x00000000AF7BB000 000040 [ 0.016028] ACPI: UEFI 0x00000000AF7FD000 000236 (v01 TOSINV TOSINV00 00000001 ACPI 00040000) [ 0.016031] ACPI: ASF! 0x00000000AF7FC000 0000A5 (v32 TOSINV TOSINV00 00000001 ACPI 00040000) [ 0.016034] ACPI: HPET 0x00000000AF7FA000 000038 (v01 TOSINV TOSINV00 00000001 ACPI 00040000) [ 0.016038] ACPI: APIC 0x00000000AF7F9000 00008C (v03 TOSINV TOSINV00 00000001 ACPI 00040000) [ 0.016041] ACPI: MCFG 0x00000000AF7F8000 00003C (v01 TOSINV TOSINV00 00000001 ACPI 00040000) [ 0.016044] ACPI: SLIC 0x00000000AF7EE000 000176 (v01 TOSINV TOSINV00 00000001 ACPI 00040000) [ 0.016048] ACPI: WDAT 0x00000000AF7ED000 000224 (v01 TOSINV TOSINV00 00000001 ACPI 00040000) [ 0.016051] ACPI: SSDT 0x00000000AF7EB000 001068 (v01 INSYDE CR CRB 00001000 ACPI 00040000) [ 0.016054] ACPI: BOOT 0x00000000AF7E9000 000028 (v01 TOSINV TOSINV00 00000001 ACPI 00040000) [ 0.016058] ACPI: ASPT 0x00000000AF7E7000 000034 (v07 TOSINV TOSINV00 00000001 ACPI 00040000) [ 0.016061] ACPI: DBGP 0x00000000AF7E6000 000034 (v01 TOSINV TOSINV00 00000001 ACPI 00040000) [ 0.016064] ACPI: SSDT 0x00000000AF7DF000 006C42 (v01 TOSINV TsbOdm 00001000 ACPI 00040000) [ 0.016068] ACPI: FPDT 0x00000000AF7DD000 000044 (v01 TOSINV TOSINV00 00000001 ACPI 00040000) [ 0.016071] ACPI: MSDM 0x00000000AF7DC000 000055 (v03 TOSINV TOSINV00 00000001 ACPI 00040000) [ 0.016074] ACPI: SSDT 0x00000000AF7DB000 000918 (v01 INSYDE CR CRB 00003000 ACPI 00040000) [ 0.016077] ACPI: SSDT 0x00000000AF7DA000 000B22 (v01 INSYDE CR CRB 00003000 ACPI 00040000) [ 0.016087] ACPI: Local APIC address 0xfee00000 [ 0.016177] No NUMA configuration found [ 0.016178] Faking a node at [mem 0x0000000000000000-0x000000044effffff] [ 0.016188] NODE_DATA(0) allocated [mem 0x44efc9000-0x44eff3fff] [ 0.016452] Zone ranges: [ 0.016453] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.016454] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.016455] Normal [mem 0x0000000100000000-0x000000044effffff] [ 0.016456] Device empty [ 0.016457] Movable zone start for each node [ 0.016461] Early memory node ranges [ 0.016462] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.016462] node 0: [mem 0x0000000000100000-0x00000000a9a6dfff] [ 0.016463] node 0: [mem 0x00000000aa977000-0x00000000aa999fff] [ 0.016464] node 0: [mem 0x00000000aa99f000-0x00000000af2befff] [ 0.016464] node 0: [mem 0x00000000af7ff000-0x00000000af7fffff] [ 0.016465] node 0: [mem 0x0000000100000000-0x000000044effffff] [ 0.016608] Reserved but unavailable: 7346 pages [ 0.016610] Initmem setup node 0 [mem 0x0000000000001000-0x000000044effffff] [ 0.016611] On node 0 totalpages: 4182862 [ 0.016613] DMA zone: 64 pages used for memmap [ 0.016613] DMA zone: 21 pages reserved [ 0.016614] DMA zone: 3996 pages, LIFO batch:0 [ 0.016725] DMA32 zone: 11087 pages used for memmap [ 0.016726] DMA32 zone: 709554 pages, LIFO batch:63 [ 0.037716] Normal zone: 54208 pages used for memmap [ 0.037718] Normal zone: 3469312 pages, LIFO batch:63 [ 0.131191] ACPI: PM-Timer IO Port: 0x408 [ 0.131194] ACPI: Local APIC address 0xfee00000 [ 0.131211] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.131213] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.131215] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.131216] ACPI: IRQ0 used by override. [ 0.131217] ACPI: IRQ9 used by override. [ 0.131219] Using ACPI (MADT) for SMP configuration information [ 0.131221] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.131226] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.131247] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.131249] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.131249] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.131250] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.131250] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.131252] PM: Registered nosave memory: [mem 0xa9a6e000-0xaa976fff] [ 0.131253] PM: Registered nosave memory: [mem 0xaa99a000-0xaa99efff] [ 0.131255] PM: Registered nosave memory: [mem 0xaf2bf000-0xaf6befff] [ 0.131255] PM: Registered nosave memory: [mem 0xaf6bf000-0xaf7befff] [ 0.131256] PM: Registered nosave memory: [mem 0xaf7bf000-0xaf7fefff] [ 0.131257] PM: Registered nosave memory: [mem 0xaf800000-0xafffffff] [ 0.131258] PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff] [ 0.131258] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.131259] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.131260] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.131260] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.131261] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.131261] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.131262] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.131262] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.131263] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.131264] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.131264] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.131265] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff] [ 0.131265] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.131267] [mem 0xb0000000-0xdfffffff] available for PCI devices [ 0.131268] Booting paravirtualized kernel on bare hardware [ 0.131271] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.131280] random: get_random_bytes called from start_kernel+0x99/0x545 with crng_init=0 [ 0.131286] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.131485] percpu: Embedded 47 pages/cpu @(____ptrval____) s155648 r8192 d28672 u262144 [ 0.131492] pcpu-alloc: s155648 r8192 d28672 u262144 alloc=1*2097152 [ 0.131493] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.131521] Built 1 zonelists, mobility grouping on. Total pages: 4117482 [ 0.131522] Policy zone: Normal [ 0.131523] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-041900rc7-generic root=UUID=aed0a586-4802-41ed-b85a-dce4c8765b14 ro quiet splash vt.handoff=7 usbcore.dyndbg=+p [ 0.135345] Calgary: detecting Calgary via BIOS EBDA area [ 0.135349] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.180182] Memory: 16316920K/16731448K available (14348K kernel code, 2690K rwdata, 4272K rodata, 2440K init, 4984K bss, 414528K reserved, 0K cma-reserved) [ 0.180280] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.180285] Kernel/User page tables isolation: enabled [ 0.180341] ftrace: allocating 41240 entries in 162 pages [ 0.198259] rcu: Hierarchical RCU implementation. [ 0.198261] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.198262] Tasks RCU enabled. [ 0.198263] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.201592] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.201800] Console: colour dummy device 80x25 [ 0.201805] console [tty0] enabled [ 0.201819] ACPI: Core revision 20180810 [ 0.202062] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.202071] hpet clockevent registered [ 0.202076] APIC: Switch to symmetric I/O mode setup [ 0.202147] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.202552] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.222074] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2284f640730, max_idle_ns: 440795225054 ns [ 0.222088] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.56 BogoMIPS (lpj=9579128) [ 0.222090] pid_max: default: 32768 minimum: 301 [ 0.222120] Security Framework initialized [ 0.222121] Yama: becoming mindful. [ 0.222138] AppArmor: AppArmor initialized [ 0.224442] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.225597] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.225646] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.225682] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.225905] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.225906] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.225910] mce: CPU supports 9 MCE banks [ 0.225924] process: using mwait in idle threads [ 0.225927] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.225928] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.225930] Spectre V2 : Mitigation: Full generic retpoline [ 0.225930] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.225931] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.225931] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.225933] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.226129] Freeing SMP alternatives memory: 36K [ 0.230148] TSC deadline timer enabled [ 0.230151] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.230251] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.230273] ... version: 3 [ 0.230273] ... bit width: 48 [ 0.230274] ... generic registers: 4 [ 0.230275] ... value mask: 0000ffffffffffff [ 0.230275] ... max period: 00007fffffffffff [ 0.230276] ... fixed-purpose events: 3 [ 0.230276] ... event mask: 000000070000000f [ 0.230313] rcu: Hierarchical SRCU implementation. [ 0.231928] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.231998] smp: Bringing up secondary CPUs ... [ 0.232085] x86: Booting SMP configuration: [ 0.232086] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.248522] smp: Brought up 1 node, 8 CPUs [ 0.248522] smpboot: Max logical packages: 1 [ 0.248522] smpboot: Total of 8 processors activated (38316.51 BogoMIPS) [ 0.250525] devtmpfs: initialized [ 0.250525] x86/mm: Memory block size: 128MB [ 0.251390] PM: Registering ACPI NVS region [mem 0xa9a6e000-0xaa976fff] (15765504 bytes) [ 0.251390] PM: Registering ACPI NVS region [mem 0xaa99a000-0xaa99efff] (20480 bytes) [ 0.251390] PM: Registering ACPI NVS region [mem 0xaf6bf000-0xaf7befff] (1048576 bytes) [ 0.251390] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.251390] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.251390] pinctrl core: initialized pinctrl subsystem [ 0.251390] RTC time: 19:33:56, date: 10/11/18 [ 0.251390] NET: Registered protocol family 16 [ 0.251390] audit: initializing netlink subsys (disabled) [ 0.251390] audit: type=2000 audit(1539286436.048:1): state=initialized audit_enabled=0 res=1 [ 0.251390] cpuidle: using governor ladder [ 0.251390] cpuidle: using governor menu [ 0.251390] Simple Boot Flag at 0x44 set to 0x1 [ 0.251390] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.251390] ACPI: bus type PCI registered [ 0.251390] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.251390] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.251390] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.251390] PCI: Using configuration type 1 for base access [ 0.251390] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.254659] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.254659] ACPI: Added _OSI(Module Device) [ 0.254659] ACPI: Added _OSI(Processor Device) [ 0.254659] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.254659] ACPI: Added _OSI(Processor Aggregator Device) [ 0.254659] ACPI: Added _OSI(Linux-Dell-Video) [ 0.254659] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.266596] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.279914] ACPI Error: Needed type [Reference], found [Integer] 00000000e840db91 (20180810/exresop-69) [ 0.279923] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427) [ 0.279930] No Local Variables are initialized for Method [_PDC] [ 0.279932] Initialized Arguments for Method [_PDC]: (1 arguments defined for method invocation) [ 0.279933] Arg0: 00000000f0d71dbf <Obj> Buffer(12) 01 00 00 00 01 00 00 00 [ 0.279942] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20180810/psparse-516) [ 0.280343] ACPI: Dynamic OEM Table Load: [ 0.280350] ACPI: SSDT 0xFFFF9DBEBC1B7000 000303 (v01 PmRef ApIst 00003000 INTL 20120215) [ 0.280777] ACPI: Dynamic OEM Table Load: [ 0.280782] ACPI: SSDT 0xFFFF9DBEBC104C00 000119 (v01 PmRef ApCst 00003000 INTL 20120215) [ 0.283443] ACPI: Interpreter enabled [ 0.283467] ACPI: (supports S0 S3 S4 S5) [ 0.283468] ACPI: Using IOAPIC for interrupt routing [ 0.283499] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.283751] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM [ 0.283770] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.287613] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.291478] ACPI: Power Resource [FN00] (on) [ 0.292404] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.292409] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.292622] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.293413] PCI host bridge to bus 0000:00 [ 0.293416] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.293417] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.293419] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.293420] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window] [ 0.293422] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.293430] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.293539] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.293576] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.293696] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.293722] pci 0000:00:14.0: reg 0x10: [mem 0xc1200000-0xc120ffff 64bit] [ 0.293795] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.293893] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.293920] pci 0000:00:16.0: reg 0x10: [mem 0xc1214000-0xc121400f 64bit] [ 0.293997] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.294106] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.294130] pci 0000:00:1a.0: reg 0x10: [mem 0xc1219000-0xc12193ff] [ 0.294217] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.294321] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.294344] pci 0000:00:1b.0: reg 0x10: [mem 0xc1210000-0xc1213fff 64bit] [ 0.294421] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.294520] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.294610] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.294714] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.294802] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.294914] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.294937] pci 0000:00:1d.0: reg 0x10: [mem 0xc1218000-0xc12183ff] [ 0.295024] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.295123] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100 [ 0.295321] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.295340] pci 0000:00:1f.2: reg 0x10: [io 0x4048-0x404f] [ 0.295348] pci 0000:00:1f.2: reg 0x14: [io 0x4054-0x4057] [ 0.295356] pci 0000:00:1f.2: reg 0x18: [io 0x4040-0x4047] [ 0.295364] pci 0000:00:1f.2: reg 0x1c: [io 0x4050-0x4053] [ 0.295372] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f] [ 0.295380] pci 0000:00:1f.2: reg 0x24: [mem 0xc1217000-0xc12177ff] [ 0.295424] pci 0000:00:1f.2: PME# supported from D3hot [ 0.295518] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.295538] pci 0000:00:1f.3: reg 0x10: [mem 0xc1215000-0xc12150ff 64bit] [ 0.295559] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f] [ 0.295712] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000 [ 0.295730] pci 0000:01:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.295740] pci 0000:01:00.0: reg 0x18: [mem 0xc0000000-0xc001ffff 64bit] [ 0.295746] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff] [ 0.295758] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.295764] pci 0000:01:00.0: enabling Extended Tags [ 0.295799] pci 0000:01:00.0: supports D1 D2 [ 0.295817] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link) [ 0.295885] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300 [ 0.295903] pci 0000:01:00.1: reg 0x10: [mem 0xc0020000-0xc0023fff 64bit] [ 0.295932] pci 0000:01:00.1: enabling Extended Tags [ 0.295965] pci 0000:01:00.1: supports D1 D2 [ 0.296029] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.296031] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.296034] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.296037] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.296112] pci 0000:07:00.0: [1969:1091] type 00 class 0x020000 [ 0.296155] pci 0000:07:00.0: reg 0x10: [mem 0xc1100000-0xc113ffff 64bit] [ 0.296170] pci 0000:07:00.0: reg 0x18: [io 0x2000-0x207f] [ 0.296314] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.296357] pci 0000:07:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.0 (capable of 7.876 Gb/s with 8 GT/s x1 link) [ 0.296440] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.296444] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.296448] pci 0000:00:1c.0: bridge window [mem 0xc1100000-0xc11fffff] [ 0.296529] pci 0000:08:00.0: [168c:0032] type 00 class 0x028000 [ 0.296571] pci 0000:08:00.0: reg 0x10: [mem 0xc1000000-0xc107ffff 64bit] [ 0.296635] pci 0000:08:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.296726] pci 0000:08:00.0: supports D1 D2 [ 0.296728] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.296848] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.296855] pci 0000:00:1c.1: bridge window [mem 0xc1000000-0xc10fffff] [ 0.297635] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.297721] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.297805] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.297889] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.297971] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.298054] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.298143] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.298227] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.298462] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.298462] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.298462] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.298462] vgaarb: loaded [ 0.298462] SCSI subsystem initialized [ 0.298465] libata version 3.00 loaded. [ 0.298465] ACPI: bus type USB registered [ 0.298465] usbcore: registered new interface driver usbfs [ 0.298465] usbcore: registered new interface driver hub [ 0.298465] usbcore: registered new device driver usb [ 0.298465] pps_core: LinuxPPS API ver. 1 registered [ 0.298465] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giome...@linux.it> [ 0.298465] PTP clock support registered [ 0.298465] EDAC MC: Ver: 3.0.0 [ 0.298465] PCI: Using ACPI for IRQ routing [ 0.301615] PCI: pci_cache_line_size set to 64 bytes [ 0.301660] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.301662] e820: reserve RAM buffer [mem 0xa9a6e000-0xabffffff] [ 0.301663] e820: reserve RAM buffer [mem 0xaa99a000-0xabffffff] [ 0.301664] e820: reserve RAM buffer [mem 0xaf2bf000-0xafffffff] [ 0.301665] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff] [ 0.301666] e820: reserve RAM buffer [mem 0x44f000000-0x44fffffff] [ 0.302078] NetLabel: Initializing [ 0.302078] NetLabel: domain hash size = 128 [ 0.302078] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.302078] NetLabel: unlabeled traffic allowed by default [ 0.306240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.306246] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.308269] clocksource: Switched to clocksource tsc-early [ 0.317603] VFS: Disk quotas dquot_6.6.0 [ 0.317621] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.317724] AppArmor: AppArmor Filesystem Enabled [ 0.317751] pnp: PnP ACPI init [ 0.317942] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.317944] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.317946] system 00:00: [io 0xffff] has been reserved [ 0.317947] system 00:00: [io 0xffff] has been reserved [ 0.317949] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.317950] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.317952] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.317954] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.317960] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.317987] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.318035] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.318040] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.318065] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.318095] pnp 00:04: Plug and Play ACPI device, IDs TOS0310 SYN1900 SYN0002 PNP0f13 (active) [ 0.318387] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.318389] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.318390] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.318392] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.318394] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.318395] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.318397] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.318399] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.318401] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.318402] system 00:05: [mem 0xc1300000-0xc1300fff] has been reserved [ 0.318404] system 00:05: [mem 0xff700000-0xff7001ff] has been reserved [ 0.318408] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.318794] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved [ 0.318796] system 00:06: [mem 0x40004000-0x40004fff] could not be reserved [ 0.318800] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.318882] pnp: PnP ACPI: found 7 devices [ 0.324672] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.324677] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 0.324679] pci 0000:08:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.324705] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0040000-0xc005ffff pref] [ 0.324708] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.324710] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.324712] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.324715] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.324718] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.324721] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.324726] pci 0000:00:1c.0: bridge window [mem 0xc1100000-0xc11fffff] [ 0.324736] pci 0000:08:00.0: BAR 6: assigned [mem 0xc1080000-0xc108ffff pref] [ 0.324737] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.324742] pci 0000:00:1c.1: bridge window [mem 0xc1000000-0xc10fffff] [ 0.324751] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.324753] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.324754] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.324756] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window] [ 0.324757] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.324759] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.324760] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.324762] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff] [ 0.324763] pci_bus 0000:07: resource 1 [mem 0xc1100000-0xc11fffff] [ 0.324765] pci_bus 0000:08: resource 1 [mem 0xc1000000-0xc10fffff] [ 0.324877] NET: Registered protocol family 2 [ 0.325048] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.325098] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.325298] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.325403] TCP: Hash tables configured (established 131072 bind 65536) [ 0.325440] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.325480] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.325586] NET: Registered protocol family 1 [ 0.325591] NET: Registered protocol family 44 [ 0.350213] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c4 took 22548 usecs [ 0.370207] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c4 took 19509 usecs [ 0.370225] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.370232] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 0.370239] pci 0000:07:00.0: set MSI_INTX_DISABLE_BUG flag [ 0.370246] PCI: CLS 64 bytes, default 64 [ 0.370283] Unpacking initramfs... [ 1.158146] Freeing initrd memory: 51504K [ 1.158170] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.158172] software IO TLB: mapped [mem 0xab2bf000-0xaf2bf000] (64MB) [ 1.158399] Scanning for low memory corruption every 60 seconds [ 1.159097] Initialise system trusted keyrings [ 1.159106] Key type blacklist registered [ 1.159134] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.160375] zbud: loaded [ 1.160848] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.161025] fuse init (API version 7.27) [ 1.161079] pstore: using deflate compression [ 1.162117] Key type asymmetric registered [ 1.162118] Asymmetric key parser 'x509' registered [ 1.162138] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 1.162172] io scheduler noop registered [ 1.162173] io scheduler deadline registered [ 1.162209] io scheduler cfq registered (default) [ 1.162767] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.162826] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.162827] vesafb: scrolling: redraw [ 1.162828] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.162835] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override. [ 1.162843] vesafb: framebuffer at 0xb0000000, mapped to 0x000000007cf01491, using 3072k, total 3072k [ 1.205750] Console: switching to colour frame buffer device 128x48 [ 1.248604] fb0: VESA VGA frame buffer device [ 1.248621] intel_idle: MWAIT substates: 0x21120 [ 1.248622] intel_idle: v0.4.1 model 0x3A [ 1.248934] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.249055] ACPI: AC Adapter [ADP0] (on-line) [ 1.249125] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.249134] ACPI: Power Button [PWRB] [ 1.249165] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.249178] ACPI: Lid Switch [LID0] [ 1.249209] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.249216] ACPI: Power Button [PWRF] [ 1.250055] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.250056] ACPI: Thermal Zone [THRM] (63 C) [ 1.250210] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.250874] battery: ACPI: Battery Slot [BAT0] (battery present) [ 1.251920] Linux agpgart interface v0.103 [ 1.253874] loop: module loaded [ 1.254208] libphy: Fixed MDIO Bus: probed [ 1.254209] tun: Universal TUN/TAP device driver, 1.6 [ 1.254248] PPP generic driver version 2.4.2 [ 1.254292] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.254295] ehci-pci: EHCI PCI platform driver [ 1.254421] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.254427] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.254440] ehci-pci 0000:00:1a.0: debug port 2 [ 1.258329] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.258331] ehci-pci 0000:00:1a.0: supports USB remote wakeup [ 1.258344] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc1219000 [ 1.274162] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.274212] usb usb1: default language 0x0409 [ 1.274225] usb usb1: udev 1, busnum 1, minor = 0 [ 1.274227] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.274229] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.274230] usb usb1: Product: EHCI Host Controller [ 1.274232] usb usb1: Manufacturer: Linux 4.19.0-041900rc7-generic ehci_hcd [ 1.274233] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.274434] usb usb1: usb_probe_device [ 1.274437] usb usb1: configuration #1 chosen from 1 choice [ 1.274454] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.274482] hub 1-0:1.0: usb_probe_interface [ 1.274484] hub 1-0:1.0: usb_probe_interface - got id [ 1.274486] hub 1-0:1.0: USB hub found [ 1.274495] hub 1-0:1.0: 2 ports detected [ 1.274496] hub 1-0:1.0: standalone hub [ 1.274498] hub 1-0:1.0: no power switching (usb 1.0) [ 1.274499] hub 1-0:1.0: individual port over-current protection [ 1.274500] hub 1-0:1.0: power on to power good time: 20ms [ 1.274509] hub 1-0:1.0: local power source is good [ 1.274548] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.274793] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.274799] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.274812] ehci-pci 0000:00:1d.0: debug port 2 [ 1.278712] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.278713] ehci-pci 0000:00:1d.0: supports USB remote wakeup [ 1.278726] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1218000 [ 1.294168] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.294224] usb usb2: default language 0x0409 [ 1.294236] usb usb2: udev 1, busnum 2, minor = 128 [ 1.294239] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.294241] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.294242] usb usb2: Product: EHCI Host Controller [ 1.294244] usb usb2: Manufacturer: Linux 4.19.0-041900rc7-generic ehci_hcd [ 1.294245] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.294416] usb usb2: usb_probe_device [ 1.294420] usb usb2: configuration #1 chosen from 1 choice [ 1.294437] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.294463] hub 2-0:1.0: usb_probe_interface [ 1.294465] hub 2-0:1.0: usb_probe_interface - got id [ 1.294468] hub 2-0:1.0: USB hub found [ 1.294482] hub 2-0:1.0: 2 ports detected [ 1.294484] hub 2-0:1.0: standalone hub [ 1.294485] hub 2-0:1.0: no power switching (usb 1.0) [ 1.294487] hub 2-0:1.0: individual port over-current protection [ 1.294488] hub 2-0:1.0: power on to power good time: 20ms [ 1.294496] hub 2-0:1.0: local power source is good [ 1.294537] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.294622] ehci-platform: EHCI generic platform driver [ 1.294640] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.294645] ohci-pci: OHCI PCI platform driver [ 1.294656] ohci-platform: OHCI generic platform driver [ 1.294666] uhci_hcd: USB Universal Host Controller Interface driver [ 1.294875] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.294880] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.295939] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930 [ 1.295944] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.295946] xhci_hcd 0000:00:14.0: supports USB remote wakeup [ 1.296100] usb usb3: default language 0x0409 [ 1.296112] usb usb3: udev 1, busnum 3, minor = 256 [ 1.296114] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.296116] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.296117] usb usb3: Product: xHCI Host Controller [ 1.296119] usb usb3: Manufacturer: Linux 4.19.0-041900rc7-generic xhci-hcd [ 1.296120] usb usb3: SerialNumber: 0000:00:14.0 [ 1.296266] usb usb3: usb_probe_device [ 1.296268] usb usb3: configuration #1 chosen from 1 choice [ 1.296286] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.296312] hub 3-0:1.0: usb_probe_interface [ 1.296313] hub 3-0:1.0: usb_probe_interface - got id [ 1.296316] hub 3-0:1.0: USB hub found [ 1.296328] hub 3-0:1.0: 4 ports detected [ 1.296329] hub 3-0:1.0: standalone hub [ 1.296331] hub 3-0:1.0: no power switching (usb 1.0) [ 1.296332] hub 3-0:1.0: individual port over-current protection [ 1.296333] hub 3-0:1.0: Single TT [ 1.296335] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.296336] hub 3-0:1.0: power on to power good time: 20ms [ 1.296343] hub 3-0:1.0: local power source is good [ 1.296741] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.296838] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.296842] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.296845] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.296847] xhci_hcd 0000:00:14.0: supports USB remote wakeup [ 1.296870] usb usb4: skipped 1 descriptor after endpoint [ 1.296875] usb usb4: default language 0x0409 [ 1.296885] usb usb4: udev 1, busnum 4, minor = 384 [ 1.296887] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.296888] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.296890] usb usb4: Product: xHCI Host Controller [ 1.296891] usb usb4: Manufacturer: Linux 4.19.0-041900rc7-generic xhci-hcd [ 1.296892] usb usb4: SerialNumber: 0000:00:14.0 [ 1.297029] usb usb4: usb_probe_device [ 1.297032] usb usb4: configuration #1 chosen from 1 choice [ 1.297046] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.297072] hub 4-0:1.0: usb_probe_interface [ 1.297073] hub 4-0:1.0: usb_probe_interface - got id [ 1.297076] hub 4-0:1.0: USB hub found [ 1.297086] hub 4-0:1.0: 4 ports detected [ 1.297088] hub 4-0:1.0: standalone hub [ 1.297089] hub 4-0:1.0: no power switching (usb 1.0) [ 1.297090] hub 4-0:1.0: individual port over-current protection [ 1.297092] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.297093] hub 4-0:1.0: power on to power good time: 20ms [ 1.297100] hub 4-0:1.0: local power source is good [ 1.297213] usb usb4-port1: peered to usb3-port1 [ 1.297308] usb usb4-port2: peered to usb3-port2 [ 1.297399] usb usb4-port3: peered to usb3-port3 [ 1.297487] usb usb4-port4: peered to usb3-port4 [ 1.297489] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.297605] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 1.300525] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.300529] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.300806] mousedev: PS/2 mouse device common for all mice [ 1.301074] rtc_cmos 00:01: RTC can wake from S4 [ 1.301240] rtc_cmos 00:01: registered as rtc0 [ 1.301256] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.301262] i2c /dev entries driver [ 1.301314] device-mapper: uevent: version 1.0.3 [ 1.301421] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-de...@redhat.com [ 1.301426] intel_pstate: Intel P-state driver initializing [ 1.301926] ledtrig-cpu: registered to indicate activity on CPUs [ 1.302113] NET: Registered protocol family 10 [ 1.305774] Segment Routing with IPv6 [ 1.305789] NET: Registered protocol family 17 [ 1.305847] Key type dns_resolver registered [ 1.306202] RAS: Correctable Errors collector initialized. [ 1.306239] microcode: sig=0x306a9, pf=0x10, revision=0x20 [ 1.306314] microcode: Microcode Update Driver: v2.2. [ 1.306322] sched_clock: Marking stable (1306008887, 301761)->(1372774293, -66463645) [ 1.306559] registered taskstats version 1 [ 1.306565] Loading compiled-in X.509 certificates [ 1.307217] Loaded X.509 cert 'Build time autogenerated kernel key: 3332f4c08cde02c74327e2f8ed8afd1c68500757' [ 1.307234] zswap: loaded using pool lzo/zbud [ 1.309912] Key type big_key registered [ 1.309914] Key type trusted registered [ 1.311291] Key type encrypted registered [ 1.311296] AppArmor: AppArmor sha1 policy hashing enabled [ 1.311301] ima: No TPM chip found, activating TPM-bypass! [ 1.311305] ima: Allocated hash algorithm: sha1 [ 1.311319] evm: Initialising EVM extended attributes: [ 1.311320] evm: security.selinux [ 1.311320] evm: security.SMACK64 [ 1.311321] evm: security.SMACK64EXEC [ 1.311321] evm: security.SMACK64TRANSMUTE [ 1.311321] evm: security.SMACK64MMAP [ 1.311322] evm: security.apparmor [ 1.311322] evm: security.ima [ 1.311323] evm: security.capability [ 1.311323] evm: HMAC attrs: 0x1 [ 1.311660] Magic number: 6:895:596 [ 1.311803] rtc_cmos 00:01: setting system clock to 2018-10-11 19:33:57 UTC (1539286437) [ 1.313458] Freeing unused decrypted memory: 2040K [ 1.314345] Freeing unused kernel image memory: 2440K [ 1.317264] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.342234] Write protecting the kernel read-only data: 22528k [ 1.342836] Freeing unused kernel image memory: 2008K [ 1.343145] Freeing unused kernel image memory: 1872K [ 1.351904] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.351905] x86/mm: Checking user space page tables [ 1.360121] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.360123] Run /init as init process [ 1.368829] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.368896] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.368906] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.378112] usb usb1-port1: status 0501 change 0001 [ 1.402125] usb usb4-port2: status 0203 change 0010 [ 1.402179] usb usb3-port3: status 0101 change 0001 [ 1.402213] usb usb2-port1: status 0501 change 0001 [ 1.404710] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.407851] acpi device:3b: registered as cooling_device9 [ 1.407921] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input5 [ 1.418460] ahci 0000:00:1f.2: version 3.0 [ 1.418653] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.426902] alx 0000:07:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [00:8c:fa:29:8c:23] [ 1.428751] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode [ 1.428755] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 1.437497] alx 0000:07:00.0 enp7s0: renamed from eth0 [ 1.445675] [drm] radeon kernel modesetting enabled. [ 1.445714] checking generic (b0000000 300000) vs hw (b0000000 10000000) [ 1.445715] fb: switching to radeondrmfb from VESA VGA [ 1.445731] Console: switching to colour dummy device 80x25 [ 1.445994] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x1179:0xFB22 0x00). [ 1.446056] ATOM BIOS: Toshiba/IEC [ 1.446136] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 1.446138] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF [ 1.446140] [drm] Detected VRAM RAM=2048M, BAR=256M [ 1.446141] [drm] RAM width 128bits DDR [ 1.446185] [TTM] Zone kernel: Available graphics memory: 8188410 kiB [ 1.446186] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.446186] [TTM] Initializing pool allocator [ 1.446189] [TTM] Initializing DMA pool allocator [ 1.446201] [drm] radeon: 2048M of VRAM memory ready [ 1.446202] [drm] radeon: 1024M of GTT memory ready. [ 1.446206] [drm] Loading TURKS Microcode [ 1.446264] [drm] Internal thermal controller with fan control [ 1.448284] [drm] radeon: dpm initialized [ 1.448330] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 1.448695] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 1.456167] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 1.456252] radeon 0000:01:00.0: WB enabled [ 1.456254] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000baa2abf7 [ 1.456255] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x0000000019763adf [ 1.456688] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x00000000cf2ea26d [ 1.456690] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.456691] [drm] Driver supports precise vblank timestamp query. [ 1.456692] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 1.456729] radeon 0000:01:00.0: radeon: using MSI. [ 1.456748] [drm] radeon: irq initialized. [ 1.466678] scsi host0: ahci [ 1.466826] scsi host1: ahci [ 1.466935] scsi host2: ahci [ 1.467080] scsi host3: ahci [ 1.467199] scsi host4: ahci [ 1.467485] scsi host5: ahci [ 1.467533] ata1: SATA max UDMA/133 abar m2048@0xc1217000 port 0xc1217100 irq 25 [ 1.467534] ata2: DUMMY [ 1.467534] ata3: DUMMY [ 1.467537] ata4: SATA max UDMA/133 abar m2048@0xc1217000 port 0xc1217280 irq 25 [ 1.467539] ata5: SATA max UDMA/133 abar m2048@0xc1217000 port 0xc1217300 irq 25 [ 1.467541] ata6: SATA max UDMA/133 abar m2048@0xc1217000 port 0xc1217380 irq 25 [ 1.472997] [drm] ring test on 0 succeeded in 1 usecs [ 1.473005] [drm] ring test on 3 succeeded in 4 usecs [ 1.486142] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 1.486157] usb usb1-port1: status 0501, change 0000, 480 Mb/s [ 1.506108] hub 3-0:1.0: state 7 ports 4 chg 0008 evt 0000 [ 1.506129] usb usb3-port3: status 0101, change 0000, 12 Mb/s [ 1.510233] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 1.510245] usb usb2-port1: status 0501, change 0000, 480 Mb/s [ 1.510339] hub 4-0:1.0: state 7 ports 4 chg 0004 evt 0000 [ 1.510350] usb usb4-port2: status 0203, change 0000, 5.0 Gb/s [ 1.614092] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.634092] usb 3-3: new full-speed USB device number 2 using xhci_hcd [ 1.638100] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.658877] [drm] ring test on 5 succeeded in 2 usecs [ 1.658881] [drm] UVD initialized successfully. [ 1.658996] [drm] ib test on ring 0 succeeded in 0 usecs [ 1.659054] [drm] ib test on ring 3 succeeded in 0 usecs [ 1.770486] usb 1-1: udev 2, busnum 1, minor = 1 [ 1.770488] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.770489] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.770616] usb 1-1: usb_probe_device [ 1.770618] usb 1-1: configuration #1 chosen from 1 choice [ 1.770710] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 1.770739] hub 1-1:1.0: usb_probe_interface [ 1.770740] hub 1-1:1.0: usb_probe_interface - got id [ 1.770742] hub 1-1:1.0: USB hub found [ 1.770831] hub 1-1:1.0: 6 ports detected [ 1.770832] hub 1-1:1.0: standalone hub [ 1.770833] hub 1-1:1.0: individual port power switching [ 1.770834] hub 1-1:1.0: individual port over-current protection [ 1.770835] hub 1-1:1.0: Single TT [ 1.770836] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.770837] hub 1-1:1.0: power on to power good time: 100ms [ 1.771088] hub 1-1:1.0: local power source is good [ 1.771160] usb 1-1-port3: DeviceRemovable is changed to 1 according to platform information. [ 1.771161] hub 1-1:1.0: enabling power on all ports [ 1.780308] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.782091] usb 3-3: ep0 maxpacket = 8 [ 1.782222] ata1.00: supports DRM functions and may not be fully accessible [ 1.782694] ata1.00: disabling queued TRIM support [ 1.782696] ata1.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0DB6Q, max UDMA/133 [ 1.782697] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.783334] ata1.00: supports DRM functions and may not be fully accessible [ 1.783588] usb 3-3: skipped 1 descriptor after interface [ 1.783590] usb 3-3: skipped 1 descriptor after interface [ 1.783727] usb 3-3: default language 0x0409 [ 1.783739] ata1.00: disabling queued TRIM support [ 1.784163] ata1.00: configured for UDMA/133 [ 1.784299] usb 3-3: udev 2, busnum 3, minor = 257 [ 1.784301] usb 3-3: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 1.784302] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.784303] usb 3-3: Product: USB Receiver [ 1.784305] usb 3-3: Manufacturer: Logitech [ 1.784386] usb 3-3: usb_probe_device [ 1.784388] usb 3-3: configuration #1 chosen from 1 choice [ 1.785242] usb 3-3: adding 3-3:1.0 (config #1, interface 0) [ 1.785266] usb 3-3: adding 3-3:1.1 (config #1, interface 1) [ 1.787963] hidraw: raw HID events driver (C) Jiri Kosina [ 1.789247] usbhid 3-3:1.0: usb_probe_interface [ 1.789248] usbhid 3-3:1.0: usb_probe_interface - got id [ 1.790002] usbhid 3-3:1.1: usb_probe_interface [ 1.790003] usbhid 3-3:1.1: usb_probe_interface - got id [ 1.791760] usbcore: registered new interface driver usbhid [ 1.791760] usbhid: USB HID core driver [ 1.792988] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C534.0001/input/input7 [ 1.794342] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 [ 1.794453] usb 2-1: udev 2, busnum 2, minor = 129 [ 1.794455] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.794456] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.794515] usb 2-1: usb_probe_device [ 1.794517] usb 2-1: configuration #1 chosen from 1 choice [ 1.794530] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.794567] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.794578] sd 0:0:0:0: [sda] Write Protect is off [ 1.794580] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.794583] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 1.794604] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.794606] hub 2-1:1.0: usb_probe_interface [ 1.794607] hub 2-1:1.0: usb_probe_interface - got id [ 1.794609] hub 2-1:1.0: USB hub found [ 1.794711] hub 2-1:1.0: 6 ports detected [ 1.794712] hub 2-1:1.0: standalone hub [ 1.794713] hub 2-1:1.0: individual port power switching [ 1.794714] hub 2-1:1.0: individual port over-current protection [ 1.794715] hub 2-1:1.0: Single TT [ 1.794716] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.794718] hub 2-1:1.0: power on to power good time: 100ms [ 1.794952] hub 2-1:1.0: local power source is good [ 1.795041] hub 2-1:1.0: enabling power on all ports [ 1.795367] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 1.795881] sd 0:0:0:0: [sda] supports TCG Opal [ 1.795882] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.854436] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0 [ 1.854664] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0002/input/input8 [ 1.854924] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0002/input/input9 [ 1.874275] usb 1-1-port1: status 0101 change 0001 [ 1.874964] usb 1-1-port3: status 0101 change 0001 [ 1.899605] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.899611] hub 2-1:1.0: hub_suspend [ 1.902097] usb 2-1: usb auto-suspend, wakeup 1 [ 1.914200] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1.914296] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0002/input/input10 [ 1.914421] usbhid 3-3:1.1: looking for a minor, starting at 0 [ 1.914645] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1 [ 1.922142] hub 2-0:1.0: hub_suspend [ 1.922169] usb usb2: bus auto-suspend, wakeup 1 [ 1.935392] usb 4-2: skipped 1 descriptor after endpoint [ 1.935397] usb 4-2: skipped 1 descriptor after endpoint [ 1.935401] usb 4-2: skipped 2 descriptors after endpoint [ 1.935404] usb 4-2: skipped 2 descriptors after endpoint [ 1.935407] usb 4-2: skipped 2 descriptors after endpoint [ 1.935410] usb 4-2: skipped 2 descriptors after endpoint [ 1.935497] usb 4-2: default language 0x0409 [ 1.935787] usb 4-2: udev 2, busnum 4, minor = 385 [ 1.935791] usb 4-2: New USB device found, idVendor=0bc2, idProduct=ab2e, bcdDevice= 1.09 [ 1.935795] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.935798] usb 4-2: Product: Ultra Slim PL [ 1.935800] usb 4-2: Manufacturer: Seagate [ 1.935803] usb 4-2: SerialNumber: NA9G2ARN [ 1.935986] usb 4-2: usb_probe_device [ 1.935988] usb 4-2: configuration #1 chosen from 1 choice [ 1.936611] usb 4-2: adding 4-2:1.0 (config #1, interface 0) [ 1.939220] usb-storage 4-2:1.0: usb_probe_interface [ 1.939223] usb-storage 4-2:1.0: usb_probe_interface - got id [ 1.939233] usbcore: registered new interface driver usb-storage [ 1.940215] uas 4-2:1.0: usb_probe_interface [ 1.940216] uas 4-2:1.0: usb_probe_interface - got id [ 1.941626] scsi host6: uas [ 1.941681] usbcore: registered new interface driver uas [ 1.942017] scsi 6:0:0:0: Direct-Access Seagate Ultra Slim PL 0109 PQ: 0 ANSI: 6 [ 1.942667] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 1.943202] sd 6:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.943203] sd 6:0:0:0: [sdb] 4096-byte physical blocks [ 1.943345] sd 6:0:0:0: [sdb] Write Protect is off [ 1.943346] sd 6:0:0:0: [sdb] Mode Sense: 53 00 00 08 [ 1.943618] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.946845] sdb: sdb1 [ 1.947865] random: fast init done [ 1.948029] sd 6:0:0:0: [sdb] Attached SCSI disk [ 1.982189] hub 1-1:1.0: state 7 ports 6 chg 000a evt 0000 [ 1.982446] usb 1-1-port1: status 0101, change 0000, 12 Mb/s [ 2.062132] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 2.109153] ata4: SATA link down (SStatus 0 SControl 300) [ 2.109293] psmouse serio1: synaptics: queried max coordinates: x [..5634], y [..4598] [ 2.165593] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1680, fw id: 706145 [ 2.171107] usb 1-1.1: default language 0x0409 [ 2.171680] usb 1-1.1: udev 3, busnum 1, minor = 2 [ 2.171682] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 2.171684] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.171685] usb 1-1.1: Product: USB2.0-CRW [ 2.171686] usb 1-1.1: Manufacturer: Generic [ 2.171687] usb 1-1.1: SerialNumber: 20100201396000000 [ 2.171870] usb 1-1.1: usb_probe_device [ 2.171873] usb 1-1.1: configuration #1 chosen from 1 choice [ 2.172066] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0) [ 2.172442] usb 1-1-port3: status 0101, change 0000, 12 Mb/s [ 2.174135] rtsx_usb 1-1.1:1.0: usb_probe_interface [ 2.174137] rtsx_usb 1-1.1:1.0: usb_probe_interface - got id [ 2.176863] usbcore: registered new interface driver rtsx_usb [ 2.186095] tsc: Refined TSC clocksource calibration: 2394.561 MHz [ 2.186101] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22842564e28, max_idle_ns: 440795246705 ns [ 2.186138] clocksource: Switched to clocksource tsc [ 2.200018] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 2.254163] usb 1-1.3: new high-speed USB device number 4 using ehci-pci [ 2.314317] [drm] ib test on ring 5 succeeded [ 2.378200] [drm] radeon atom DIG backlight initialized [ 2.378214] [drm] Radeon Display Connectors [ 2.378216] [drm] Connector 0: [ 2.378217] [drm] LVDS-1 [ 2.378218] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 2.378219] [drm] Encoders: [ 2.378219] [drm] LCD1: INTERNAL_UNIPHY [ 2.378219] [drm] Connector 1: [ 2.378220] [drm] HDMI-A-1 [ 2.378220] [drm] HPD1 [ 2.378221] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 2.378222] [drm] Encoders: [ 2.378222] [drm] DFP1: INTERNAL_UNIPHY1 [ 2.378223] [drm] Connector 2: [ 2.378223] [drm] VGA-1 [ 2.378224] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 2.378224] [drm] Encoders: [ 2.378225] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 2.425214] ata5: SATA link down (SStatus 0 SControl 300) [ 2.436859] usb 1-1.3: skipped 1 descriptor after configuration [ 2.436861] usb 1-1.3: skipped 5 descriptors after interface [ 2.436863] usb 1-1.3: skipped 1 descriptor after endpoint [ 2.436865] usb 1-1.3: skipped 19 descriptors after interface [ 2.437704] usb 1-1.3: default language 0x0409 [ 2.443955] usb 1-1.3: udev 4, busnum 1, minor = 3 [ 2.443957] usb 1-1.3: New USB device found, idVendor=10f1, idProduct=1a43, bcdDevice=12.12 [ 2.443958] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2.443960] usb 1-1.3: Product: TOSHIBA Web Camera - HD [ 2.443961] usb 1-1.3: Manufacturer: Importek [ 2.444150] usb 1-1.3: usb_probe_device [ 2.444152] usb 1-1.3: configuration #1 chosen from 1 choice [ 2.444483] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) [ 2.448907] usb 1-1.3: adding 1-1.3:1.1 (config #1, interface 1) [ 2.741486] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.745332] ata6.00: ATAPI: TSSTcorp CDDVDW SN-208FB, SB00, max UDMA/100 [ 2.750132] ata6.00: configured for UDMA/100 [ 2.761135] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208FB SB00 PQ: 0 ANSI: 5 [ 2.783285] [drm] fb mappable at 0xB0363000 [ 2.783286] [drm] vram apper at 0xB0000000 [ 2.783287] [drm] size 4325376 [ 2.783288] [drm] fb depth is 24 [ 2.783288] [drm] pitch is 5632 [ 2.783445] fbcon: radeondrmfb (fb0) is primary device [ 3.137465] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.137466] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.137678] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 3.137776] sr 5:0:0:0: Attached scsi generic sg2 type 5 [ 3.379111] Console: switching to colour frame buffer device 170x48 [ 3.381178] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 3.394713] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 3.541765] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 3.619850] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 3.638588] systemd[1]: Detected architecture x86-64. [ 3.638870] systemd[1]: Set hostname to <harutyun-pc>. [ 3.706410] systemd[1]: Created slice System Slice. [ 3.706461] systemd[1]: Listening on udev Kernel Socket. [ 3.706489] systemd[1]: Listening on udev Control Socket. [ 3.706549] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.706579] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.706596] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.706620] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.729448] lp: driver loaded but no devices found [ 3.730826] bpfilter: Loaded bpfilter_umh pid 325 [ 3.731984] ppdev: user-space parallel port driver [ 3.826759] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro [ 3.847052] systemd-journald[314]: Received request to flush runtime journal from PID 1 [ 3.904659] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver [ 3.950407] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM [ 3.968592] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 3.968595] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 3.968596] RAPL PMU: hw unit of domain package 2^-16 Joules [ 3.968597] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 3.970762] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.972971] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.981812] cryptd: max_cpu_qlen set to 1000 [ 3.999091] AVX version of gcm_enc/dec engaged. [ 3.999092] AES CTR mode by8 optimization enabled [ 4.043138] ath: phy0: ASPM enabled: 0x42 [ 4.043142] ath: EEPROM regdomain: 0x65 [ 4.043142] ath: EEPROM indicates we should expect a direct regpair map [ 4.043143] ath: Country alpha2 being used: 00 [ 4.043144] ath: Regpair used: 0x65 [ 4.056347] media: Linux media interface: v0.10 [ 4.066688] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 4.067367] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffbbbb82680000, irq=17 [ 4.083968] videodev: Linux video capture interface: v2.00 [ 4.090321] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 4.097884] gpio_ich: GPIO from 436 to 511 on gpio_ich [ 4.101351] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 4.107248] ath9k 0000:08:00.0 wlp8s0: renamed from wlan0 [ 4.114020] uvcvideo 1-1.3:1.0: usb_probe_interface [ 4.114023] uvcvideo 1-1.3:1.0: usb_probe_interface - got id [ 4.115210] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 4.115213] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.115214] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 4.115216] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.115217] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.115219] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 4.115220] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 4.118061] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (10f1:1a43) [ 4.122059] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 4.122184] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 4.122949] intel_rapl: Found RAPL domain package [ 4.122950] intel_rapl: Found RAPL domain core [ 4.122955] intel_rapl: RAPL package 0 domain package locked by BIOS [ 4.149353] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized! [ 4.149355] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized! [ 4.149356] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 4.149405] input: TOSHIBA Web Camera - HD: TOSHIB as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input16 [ 4.149457] usbcore: registered new interface driver uvcvideo [ 4.149458] USB Video Class driver (1.1.1) [ 4.423475] random: crng init done [ 4.423476] random: 7 urandom warning(s) missed due to ratelimiting [ 4.618929] Adding 7999484k swap on /dev/sda6. Priority:-2 extents:1 across:7999484k SSFS [ 4.674738] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 4.697077] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 4.859047] audit: type=1400 audit(1539286441.042:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=1050 comm="apparmor_parser" [ 4.859193] audit: type=1400 audit(1539286441.042:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/stroke" pid=1053 comm="apparmor_parser" [ 4.860372] audit: type=1400 audit(1539286441.042:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1047 comm="apparmor_parser" [ 4.860376] audit: type=1400 audit(1539286441.042:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1047 comm="apparmor_parser" [ 4.860378] audit: type=1400 audit(1539286441.042:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1047 comm="apparmor_parser" [ 4.860380] audit: type=1400 audit(1539286441.042:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1047 comm="apparmor_parser" [ 4.860567] audit: type=1400 audit(1539286441.042:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/charon" pid=1052 comm="apparmor_parser" [ 4.860750] audit: type=1400 audit(1539286441.042:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1056 comm="apparmor_parser" [ 4.861059] audit: type=1400 audit(1539286441.042:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1046 comm="apparmor_parser" [ 5.287574] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready [ 5.302646] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready [ 5.308762] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 5.309495] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 5.391142] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready [ 5.990518] usb 1-1.1: usb auto-suspend, wakeup 1 [ 6.122266] usb 1-1.1: usb auto-resume [ 6.123273] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004 [ 6.123514] usb 1-1-port2: status 0101, change 0001, 12 Mb/s [ 6.154145] usb 1-1.3: usb auto-suspend, wakeup 0 [ 6.190289] usb 1-1.1: Waited 0ms for CONNECT [ 6.190292] usb 1-1.1: finish resume [ 6.266165] usb 1-1-port2: debounce total 100ms stable 100ms status 0x101 [ 6.346099] usb 1-1.2: new full-speed USB device number 5 using ehci-pci [ 6.459683] usb 1-1.2: default language 0x0409 [ 6.460432] usb 1-1.2: udev 5, busnum 1, minor = 4 [ 6.460438] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0219, bcdDevice= 0.02 [ 6.460441] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.460444] usb 1-1.2: Product: Bluetooth USB Host Controller [ 6.460447] usb 1-1.2: Manufacturer: Atheros Communications [ 6.460450] usb 1-1.2: SerialNumber: Alaska Day 2006 [ 6.460593] usb 1-1.2: usb_probe_device [ 6.460595] usb 1-1.2: configuration #1 chosen from 1 choice [ 6.461034] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 6.461093] usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1) [ 6.481460] Bluetooth: Core ver 2.22 [ 6.481480] NET: Registered protocol family 31 [ 6.481481] Bluetooth: HCI device and connection manager initialized [ 6.481483] Bluetooth: HCI socket layer initialized [ 6.481485] Bluetooth: L2CAP socket layer initialized [ 6.481489] Bluetooth: SCO socket layer initialized [ 6.486649] btusb 1-1.2:1.0: usb_probe_interface [ 6.486651] btusb 1-1.2:1.0: usb_probe_interface - got id [ 6.486807] usbcore: registered new interface driver btusb [ 6.487948] usbcore: registered new interface driver ath3k [ 6.586935] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.586936] Bluetooth: BNEP filters: protocol multicast [ 6.586939] Bluetooth: BNEP socket layer initialized [ 6.593734] Bluetooth: RFCOMM TTY layer initialized [ 6.593738] Bluetooth: RFCOMM socket layer initialized [ 6.593745] Bluetooth: RFCOMM ver 1.11 [ 8.194557] usb 1-1.1: usb auto-suspend, wakeup 1 [ 8.234411] usb 1-1.1: usb auto-resume [ 8.306630] usb 1-1.1: Waited 0ms for CONNECT [ 8.306632] usb 1-1.1: finish resume [ 9.139632] usb 1-1.2: usb auto-suspend, wakeup 1 [ 11.039394] NET: Registered protocol family 15 [ 11.043121] vboxdrv: loading out-of-tree module taints kernel. [ 11.043331] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 11.051397] vboxdrv: Found 8 processor cores [ 11.058794] Guest personality initialized and is inactive [ 11.058839] VMCI host device registered (name=vmci, major=10, minor=53) [ 11.058839] Initialized host personality [ 11.065049] Initializing XFRM netlink socket [ 11.070281] vboxdrv: TSC mode is Invariant, tentative frequency 2394561077 Hz [ 11.070282] vboxdrv: Successfully loaded version 5.1.38_Ubuntu (interface 0x002a0000) [ 11.075917] VBoxNetFlt: Successfully started. [ 11.082391] VBoxNetAdp: Successfully started. [ 11.085889] NET: Registered protocol family 40 [ 11.089223] VBoxPciLinuxInit [ 11.091791] vboxpci: IOMMU not found (not registered) [ 11.178628] usb 1-1.1: usb auto-suspend, wakeup 1 [ 11.198110] hub 1-1:1.0: hub_suspend [ 11.200396] usb 1-1: usb auto-suspend, wakeup 1 [ 11.218117] hub 1-0:1.0: hub_suspend [ 11.218131] usb usb1: bus auto-suspend, wakeup 1 [ 11.370097] usb usb1: usb auto-resume [ 11.370125] hub 1-0:1.0: hub_resume [ 11.370144] usb usb1-port1: status 0507 change 0000 [ 11.370172] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 11.370192] usb 1-1: usb auto-resume [ 11.374584] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 11.406121] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 11.438097] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 11.442129] usb 1-1: Waited 0ms for CONNECT [ 11.442131] usb 1-1: finish resume [ 11.442424] hub 1-1:1.0: hub_resume [ 11.442555] usb 1-1-port1: status 0507 change 0000 [ 11.442678] usb 1-1-port2: status 0107 change 0000 [ 11.442803] usb 1-1-port3: status 0507 change 0000 [ 11.443161] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 11.443399] usb 1-1.1: usb auto-resume [ 11.510303] usb 1-1.1: Waited 0ms for CONNECT [ 11.510305] usb 1-1.1: finish resume [ 13.994696] usb 1-1.1: usb auto-suspend, wakeup 1 [ 14.014169] hub 1-1:1.0: hub_suspend [ 14.016477] usb 1-1: usb auto-suspend, wakeup 1 [ 14.034168] hub 1-0:1.0: hub_suspend [ 14.034195] usb usb1: bus auto-suspend, wakeup 1 [ 14.570131] usb usb1: usb auto-resume [ 14.570151] hub 1-0:1.0: hub_resume [ 14.570226] usb usb1-port1: status 0507 change 0000 [ 14.570283] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 14.570355] usb 1-1: usb auto-resume [ 14.642116] usb 1-1: Waited 0ms for CONNECT [ 14.642119] usb 1-1: finish resume [ 14.642303] hub 1-1:1.0: hub_resume [ 14.642426] usb 1-1-port1: status 0507 change 0000 [ 14.642552] usb 1-1-port2: status 0107 change 0000 [ 14.642677] usb 1-1-port3: status 0507 change 0000 [ 14.643065] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 14.643296] usb 1-1.1: usb auto-resume [ 14.710207] usb 1-1.1: Waited 0ms for CONNECT [ 14.710209] usb 1-1.1: finish resume [ 15.574826] wlp8s0: authenticate with 2c:ab:25:ff:36:67 [ 15.596147] wlp8s0: send auth to 2c:ab:25:ff:36:67 (try 1/3) [ 15.598051] wlp8s0: authenticated [ 15.602099] wlp8s0: associate with 2c:ab:25:ff:36:67 (try 1/3) [ 15.606956] wlp8s0: RX AssocResp from 2c:ab:25:ff:36:67 (capab=0x411 status=0 aid=2) [ 15.607095] wlp8s0: associated [ 15.623241] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready [ 17.066816] usb 1-1.1: usb auto-suspend, wakeup 1 [ 17.086102] hub 1-1:1.0: hub_suspend [ 17.088316] usb 1-1: usb auto-suspend, wakeup 1 [ 17.106096] hub 1-0:1.0: hub_suspend [ 17.106105] usb usb1: bus auto-suspend, wakeup 1 [ 17.770170] usb usb1: usb auto-resume [ 17.770186] hub 1-0:1.0: hub_resume [ 17.770203] usb usb1-port1: status 0507 change 0000 [ 17.770221] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 17.770236] usb 1-1: usb auto-resume [ 17.838113] usb 1-1: Waited 0ms for CONNECT [ 17.838116] usb 1-1: finish resume [ 17.838338] hub 1-1:1.0: hub_resume [ 17.838463] usb 1-1-port1: status 0507 change 0000 [ 17.838587] usb 1-1-port2: status 0107 change 0000 [ 17.838712] usb 1-1-port3: status 0507 change 0000 [ 17.839106] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 17.839339] usb 1-1.1: usb auto-resume [ 17.906220] usb 1-1.1: Waited 0ms for CONNECT [ 17.906222] usb 1-1.1: finish resume [ 18.379212] usb 1-1.3: usb auto-resume [ 18.450219] usb 1-1.3: Waited 0ms for CONNECT [ 18.450222] usb 1-1.3: finish resume [ 18.451340] usb 1-1.3: disable remote wakeup, status -32 [ 18.457338] usb 1-1.2: usb auto-resume [ 18.483093] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004 [ 18.522218] usb 1-1.2: Waited 0ms for CONNECT [ 18.522222] usb 1-1.2: finish resume [ 20.974600] usb 1-1.1: usb auto-suspend, wakeup 1 [ 20.994326] usb 1-1.1: usb auto-resume [ 21.043071] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0002 [ 21.066196] usb 1-1.1: Waited 0ms for CONNECT [ 21.066198] usb 1-1.1: finish resume [ 21.174441] usb 1-1.2: usb auto-suspend, wakeup 1 [ 23.026199] usb 1-1.3: usb auto-suspend, wakeup 0 [ 23.074551] usb 1-1.1: usb auto-suspend, wakeup 1 [ 23.094119] hub 1-1:1.0: hub_suspend [ 23.096379] usb 1-1: usb auto-suspend, wakeup 1 [ 23.114121] usb 1-1: usb auto-resume [ 23.182126] usb 1-1: Waited 0ms for CONNECT [ 23.182128] usb 1-1: finish resume [ 23.182372] hub 1-1:1.0: hub_resume [ 23.182461] usb 1-1-port1: status 0507 change 0000 [ 23.182558] usb 1-1-port2: status 0107 change 0000 [ 23.182693] usb 1-1-port3: status 0507 change 0000 [ 23.183059] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 23.183299] usb 1-1.1: usb auto-resume [ 23.250198] usb 1-1.1: Waited 0ms for CONNECT [ 23.250200] usb 1-1.1: finish resume [ 24.325044] usb 1-1.3: usb auto-resume [ 24.371109] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0008 [ 24.390421] usb 1-1.3: Waited 0ms for CONNECT [ 24.390424] usb 1-1.3: finish resume [ 24.391673] usb 1-1.3: disable remote wakeup, status -32 [ 26.027433] usb 1-1.1: usb auto-suspend, wakeup 1 [ 26.094426] usb 1-1.1: usb auto-resume [ 26.162310] usb 1-1.1: Waited 0ms for CONNECT [ 26.162313] usb 1-1.1: finish resume [ 27.050322] usb 1-1.3: usb auto-suspend, wakeup 0 [ 28.166674] usb 1-1.1: usb auto-suspend, wakeup 1 [ 28.186214] hub 1-1:1.0: hub_suspend [ 28.188598] usb 1-1: usb auto-suspend, wakeup 1 [ 28.206171] hub 1-0:1.0: hub_suspend [ 28.206197] usb usb1: bus auto-suspend, wakeup 1 [ 28.206229] usb usb1: usb auto-resume [ 28.222142] hub 1-0:1.0: hub_resume [ 28.222209] usb usb1-port1: status 0507 change 0000 [ 28.222261] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 28.222355] usb 1-1: usb auto-resume [ 28.290228] usb 1-1: Waited 0ms for CONNECT [ 28.290230] usb 1-1: finish resume [ 28.290503] hub 1-1:1.0: hub_resume [ 28.290701] usb 1-1-port1: status 0507 change 0000 [ 28.290822] usb 1-1-port2: status 0107 change 0000 [ 28.291035] usb 1-1-port3: status 0507 change 0000 [ 28.291840] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 28.292334] usb 1-1.1: usb auto-resume [ 28.358235] usb 1-1.1: Waited 0ms for CONNECT [ 28.358237] usb 1-1.1: finish resume [ 31.146665] usb 1-1.1: usb auto-suspend, wakeup 1 [ 31.166168] hub 1-1:1.0: hub_suspend [ 31.168482] usb 1-1: usb auto-suspend, wakeup 1 [ 31.186175] hub 1-0:1.0: hub_suspend [ 31.186211] usb usb1: bus auto-suspend, wakeup 1 [ 31.434100] usb usb1: usb auto-resume [ 31.434114] hub 1-0:1.0: hub_resume [ 31.434157] usb usb1-port1: status 0507 change 0000 [ 31.434234] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.434310] usb 1-1: usb auto-resume [ 31.502237] usb 1-1: Waited 0ms for CONNECT [ 31.502240] usb 1-1: finish resume [ 31.502768] hub 1-1:1.0: hub_resume [ 31.503038] usb 1-1-port1: status 0507 change 0000 [ 31.503267] usb 1-1-port2: status 0107 change 0000 [ 31.503556] usb 1-1-port3: status 0507 change 0000 [ 31.504290] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 31.504789] usb 1-1.1: usb auto-resume [ 31.546849] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0002 [ 31.570432] usb 1-1.1: Waited 0ms for CONNECT [ 31.570434] usb 1-1.1: finish resume [ 33.962686] usb 1-1.1: usb auto-suspend, wakeup 1 [ 33.982097] hub 1-1:1.0: hub_suspend [ 33.984448] usb 1-1: usb auto-suspend, wakeup 1 [ 34.002099] hub 1-0:1.0: hub_suspend [ 34.002119] usb usb1: bus auto-suspend, wakeup 1 [ 34.634173] usb usb1: usb auto-resume [ 34.634192] hub 1-0:1.0: hub_resume [ 34.634261] usb usb1-port1: status 0507 change 0000 [ 34.634299] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.634407] usb 1-1: usb auto-resume [ 34.702231] usb 1-1: Waited 0ms for CONNECT [ 34.702233] usb 1-1: finish resume [ 34.702507] hub 1-1:1.0: hub_resume [ 34.702631] usb 1-1-port1: status 0507 change 0000 [ 34.702722] usb 1-1-port2: status 0107 change 0000 [ 34.702842] usb 1-1-port3: status 0507 change 0000 [ 34.703264] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 34.703476] usb 1-1.1: usb auto-resume [ 34.703592] usb 1-1.2: usb auto-resume [ 34.738808] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0006 [ 34.770260] usb 1-1.2: Waited 0ms for CONNECT [ 34.770262] usb 1-1.2: finish resume [ 34.770295] usb 1-1.1: Waited 0ms for CONNECT [ 34.770297] usb 1-1.1: finish resume [ 37.037201] usb 1-1.1: usb auto-suspend, wakeup 1 [ 37.045198] usb 1-1.2: usb auto-suspend, wakeup 1 [ 37.064764] hub 1-1:1.0: hub_suspend [ 37.066961] usb 1-1: usb auto-suspend, wakeup 1 [ 37.084805] hub 1-0:1.0: hub_suspend [ 37.084817] usb usb1: bus auto-suspend, wakeup 1 [ 37.838379] usb usb1: usb auto-resume [ 37.838403] hub 1-0:1.0: hub_resume [ 37.838438] usb usb1-port1: status 0507 change 0000 [ 37.838499] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.838630] usb 1-1: usb auto-resume [ 37.906536] usb 1-1: Waited 0ms for CONNECT [ 37.906538] usb 1-1: finish resume [ 37.906841] hub 1-1:1.0: hub_resume [ 37.906965] usb 1-1-port1: status 0507 change 0000 [ 37.907091] usb 1-1-port2: status 0107 change 0000 [ 37.907215] usb 1-1-port3: status 0507 change 0000 [ 37.907578] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 37.907806] usb 1-1.1: usb auto-resume [ 37.974926] usb 1-1.1: Waited 0ms for CONNECT [ 37.974928] usb 1-1.1: finish resume [ 39.955379] [UFW BLOCK] IN=wlp8s0 OUT= MAC=20:16:d8:15:41:76:2c:ab:25:ff:36:67:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [ 39.987292] usb 1-1.1: usb auto-suspend, wakeup 1 [ 40.006360] hub 1-1:1.0: hub_suspend [ 40.008701] usb 1-1: usb auto-suspend, wakeup 1 [ 40.026423] usb 1-1: usb auto-resume [ 40.094521] usb 1-1: Waited 0ms for CONNECT [ 40.094533] usb 1-1: finish resume [ 40.095042] hub 1-1:1.0: hub_resume [ 40.095287] usb 1-1-port1: status 0507 change 0000 [ 40.095537] usb 1-1-port2: status 0107 change 0000 [ 40.095787] usb 1-1-port3: status 0507 change 0000 [ 40.096580] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 40.096942] usb 1-1.1: usb auto-resume [ 40.162752] usb 1-1.1: Waited 0ms for CONNECT [ 40.162754] usb 1-1.1: finish resume [ 42.170768] usb 1-1.1: usb auto-suspend, wakeup 1 [ 42.189838] hub 1-1:1.0: hub_suspend [ 42.192295] usb 1-1: usb auto-suspend, wakeup 1 [ 42.209931] usb 1-1: usb auto-resume [ 42.277976] usb 1-1: Waited 0ms for CONNECT [ 42.277981] usb 1-1: finish resume [ 42.278522] hub 1-1:1.0: hub_resume [ 42.278782] usb 1-1-port1: status 0507 change 0000 [ 42.279024] usb 1-1-port2: status 0107 change 0000 [ 42.279273] usb 1-1-port3: status 0507 change 0000 [ 42.279985] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 42.280270] usb 1-1.1: usb auto-resume [ 42.346241] usb 1-1.1: Waited 0ms for CONNECT [ 42.346244] usb 1-1.1: finish resume [ 44.986636] usb 1-1.1: usb auto-suspend, wakeup 1 [ 45.005670] hub 1-1:1.0: hub_suspend [ 45.008012] usb 1-1: usb auto-suspend, wakeup 1 [ 45.025699] hub 1-0:1.0: hub_suspend [ 45.025733] usb usb1: bus auto-suspend, wakeup 1 [ 45.402091] usb usb1: usb auto-resume [ 45.402105] hub 1-0:1.0: hub_resume [ 45.402150] usb usb1-port1: status 0507 change 0000 [ 45.402232] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 45.402297] usb 1-1: usb auto-resume [ 45.470282] usb 1-1: Waited 0ms for CONNECT [ 45.470284] usb 1-1: finish resume [ 45.470783] hub 1-1:1.0: hub_resume [ 45.471023] usb 1-1-port1: status 0507 change 0000 [ 45.471264] usb 1-1-port2: status 0107 change 0000 [ 45.471513] usb 1-1-port3: status 0507 change 0000 [ 45.472229] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 45.472497] usb 1-1.1: usb auto-resume [ 45.538478] usb 1-1.1: Waited 0ms for CONNECT [ 45.538480] usb 1-1.1: finish resume [ 47.170927] hub 4-0:1.0: state 7 ports 4 chg 0000 evt 0002 [ 47.170962] usb usb4-port1: link state change [ 47.170969] usb usb4-port1: config error [ 47.170975] usb usb4-port1: do warm reset [ 47.228228] usb usb4-port1: not warm reset yet, waiting 50ms [ 47.288319] usb usb4-port1: not warm reset yet, waiting 200ms [ 47.496524] usb usb4-port1: not warm reset yet, waiting 200ms [ 47.704746] usb usb4-port1: not warm reset yet, waiting 200ms [ 47.912961] usb usb4-port1: not warm reset yet, waiting 200ms [ 47.913004] xhci_hcd 0000:00:14.0: CTRL: TypeReq=0x2303 val=0x5 idx=0x301 len=0 ==> -19 [ 47.913010] hub 4-0:1.0: state 7 ports 4 chg 0000 evt 0002 [ 47.913016] usb usb4-port1: config error [ 48.003064] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0002 [ 48.003114] usb usb3-port1: status 0101, change 0001, 12 Mb/s [ 48.024353] [UFW BLOCK] IN=wlp8s0 OUT= MAC=20:16:d8:15:41:76:2c:ab:25:ff:36:67:08:00 SRC=192.168.0.1 DST=239.255.255.250 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 48.062117] usb 1-1.1: usb auto-suspend, wakeup 1 [ 48.081128] hub 1-1:1.0: hub_suspend [ 48.083432] usb 1-1: usb auto-suspend, wakeup 1 [ 48.101146] hub 1-0:1.0: hub_suspend [ 48.101174] usb usb1: bus auto-suspend, wakeup 1 [ 48.145208] usb usb3-port1: debounce total 100ms stable 100ms status 0x101 [ 48.273306] usb 3-1: new high-speed USB device number 3 using xhci_hcd [ 48.341403] usb usb3-port1: not reset yet, waiting 60ms [ 48.409411] usb usb3-port1: not reset yet, waiting 200ms [ 48.605622] usb usb1: usb auto-resume [ 48.605640] hub 1-0:1.0: hub_resume [ 48.605712] usb usb1-port1: status 0507 change 0000 [ 48.605786] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 48.605879] usb 1-1: usb auto-resume [ 48.617698] usb usb3-port1: not reset yet, waiting 200ms [ 48.673760] usb 1-1: Waited 0ms for CONNECT [ 48.673762] usb 1-1: finish resume [ 48.674241] hub 1-1:1.0: hub_resume [ 48.674385] usb 1-1-port1: status 0507 change 0000 [ 48.674672] usb 1-1-port2: status 0107 change 0000 [ 48.674913] usb 1-1-port3: status 0507 change 0000 [ 48.675716] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 48.676185] usb 1-1.1: usb auto-resume [ 48.742051] usb 1-1.1: Waited 0ms for CONNECT [ 48.742053] usb 1-1.1: finish resume [ 48.825873] hub 3-0:1.0: port_wait_reset: err = -11 [ 48.825878] usb usb3-port1: not enabled, trying reset again... [ 49.034089] usb usb3-port1: not reset yet, waiting 200ms [ 49.242281] usb usb3-port1: not reset yet, waiting 200ms [ 49.450476] usb usb3-port1: not reset yet, waiting 200ms [ 49.658599] hub 3-0:1.0: port_wait_reset: err = -11 [ 49.658601] usb usb3-port1: not enabled, trying reset again... [ 49.866857] usb usb3-port1: not reset yet, waiting 200ms [ 50.075002] usb usb3-port1: not reset yet, waiting 200ms [ 50.283249] hub 3-0:1.0: port_wait_reset: err = -11 [ 50.283252] usb usb3-port1: not enabled, trying reset again... [ 50.491416] usb usb3-port1: not reset yet, waiting 200ms [ 50.699611] usb usb3-port1: not reset yet, waiting 200ms [ 50.907750] usb usb3-port1: not reset yet, waiting 200ms [ 51.115938] usb usb3-port1: not reset yet, waiting 200ms [ 51.116015] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0002 [ 51.116028] usb usb3-port1: status 0100, change 0001, 12 Mb/s [ 51.136788] usb 1-1.1: usb auto-suspend, wakeup 1 [ 51.155968] hub 1-1:1.0: hub_suspend [ 51.158416] usb 1-1: usb auto-suspend, wakeup 1 [ 51.175976] hub 1-0:1.0: hub_suspend [ 51.176011] usb usb1: bus auto-suspend, wakeup 1 [ 51.260044] usb usb3-port1: debounce total 100ms stable 100ms status 0x100 [ 51.310408] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0002 [ 51.310454] usb usb3-port1: status 0101, change 0001, 12 Mb/s [ 51.452202] usb usb3-port1: debounce total 100ms stable 100ms status 0x101 [ 51.580281] usb 3-1: new high-speed USB device number 4 using xhci_hcd [ 51.648362] usb usb3-port1: not reset yet, waiting 60ms [ 51.716421] usb usb3-port1: not reset yet, waiting 200ms [ 51.808461] usb usb1: usb auto-resume [ 51.808479] hub 1-0:1.0: hub_resume [ 51.808566] usb usb1-port1: status 0507 change 0000 [ 51.808643] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 51.808697] usb 1-1: usb auto-resume [ 51.876594] usb 1-1: Waited 0ms for CONNECT [ 51.876597] usb 1-1: finish resume [ 51.877149] hub 1-1:1.0: hub_resume [ 51.877389] usb 1-1-port1: status 0507 change 0000 [ 51.877638] usb 1-1-port2: status 0107 change 0000 [ 51.877890] usb 1-1-port3: status 0507 change 0000 [ 51.878449] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 51.878759] usb 1-1.1: usb auto-resume [ 51.924604] usb usb3-port1: not reset yet, waiting 200ms [ 51.944888] usb 1-1.1: Waited 0ms for CONNECT [ 51.944890] usb 1-1.1: finish resume [ 52.132751] usb usb3-port1: not reset yet, waiting 200ms [ 52.340946] hub 3-0:1.0: port_wait_reset: err = -11 [ 52.340948] usb usb3-port1: not enabled, trying reset again... [ 52.549086] usb usb3-port1: not reset yet, waiting 200ms [ 52.757222] usb usb3-port1: not reset yet, waiting 200ms [ 52.965415] usb usb3-port1: not reset yet, waiting 200ms [ 53.173547] hub 3-0:1.0: port_wait_reset: err = -11 [ 53.173549] usb usb3-port1: not enabled, trying reset again... [ 53.381661] usb usb3-port1: not reset yet, waiting 200ms [ 53.503701] hub 4-0:1.0: state 7 ports 4 chg 0000 evt 0002 [ 53.503736] usb usb4-port1: link state change [ 53.503743] usb usb4-port1: config error [ 53.503750] usb usb4-port1: do warm reset [ 53.561821] usb usb4-port1: not warm reset yet, waiting 50ms [ 53.589863] usb usb3-port1: not reset yet, waiting 200ms [ 53.621882] usb usb4-port1: not warm reset yet, waiting 200ms [ 53.797970] usb usb3-port1: not reset yet, waiting 200ms [ 53.830014] usb usb4-port1: not warm reset yet, waiting 200ms [ 54.006138] hub 3-0:1.0: port_wait_reset: err = -11 [ 54.006141] usb usb3-port1: not enabled, trying reset again... [ 54.038162] usb usb4-port1: not warm reset yet, waiting 200ms [ 54.043130] usb 1-1.1: usb auto-suspend, wakeup 1 [ 54.062177] hub 1-1:1.0: hub_suspend [ 54.064502] usb 1-1: usb auto-suspend, wakeup 1 [ 54.082187] hub 1-0:1.0: hub_suspend [ 54.082222] usb usb1: bus auto-suspend, wakeup 1 [ 54.214287] usb usb3-port1: not reset yet, waiting 200ms [ 54.246303] usb usb4-port1: not warm reset yet, waiting 200ms [ 54.246347] xhci_hcd 0000:00:14.0: CTRL: TypeReq=0x2303 val=0x5 idx=0x301 len=0 ==> -19 [ 54.246353] hub 4-0:1.0: state 7 ports 4 chg 0000 evt 0002 [ 54.422407] usb usb3-port1: not reset yet, waiting 200ms [ 54.630562] hub 3-0:1.0: port_wait_reset: err = -11 [ 54.630574] usb usb3-port1: not enabled, trying reset again... [ 54.838692] usb usb3-port1: not reset yet, waiting 200ms [ 55.010776] usb usb1: usb auto-resume [ 55.010803] hub 1-0:1.0: hub_resume [ 55.010872] usb usb1-port1: status 0507 change 0000 [ 55.010949] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 55.011044] usb 1-1: usb auto-resume [ 55.046836] usb usb3-port1: not reset yet, waiting 200ms [ 55.078897] usb 1-1: Waited 0ms for CONNECT [ 55.078908] usb 1-1: finish resume [ 55.079431] hub 1-1:1.0: hub_resume [ 55.079734] usb 1-1-port1: status 0507 change 0000 [ 55.079928] usb 1-1-port2: status 0107 change 0000 [ 55.080215] usb 1-1-port3: status 0507 change 0000 [ 55.080962] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 55.081439] usb 1-1.1: usb auto-resume [ 55.146997] usb 1-1.1: Waited 0ms for CONNECT [ 55.146999] usb 1-1.1: finish resume [ 55.254941] usb usb3-port1: not reset yet, waiting 200ms [ 55.463105] usb usb3-port1: not reset yet, waiting 200ms [ 55.463177] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0002 [ 55.463188] usb usb3-port1: status 0100, change 0001, 12 Mb/s [ 55.643223] usb usb3-port1: debounce total 125ms stable 100ms status 0x101 [ 55.771262] usb 3-1: new high-speed USB device number 5 using xhci_hcd [ 55.839314] usb usb3-port1: not reset yet, waiting 60ms [ 55.907352] usb usb3-port1: not reset yet, waiting 200ms [ 56.115500] usb usb3-port1: not reset yet, waiting 200ms [ 56.154951] hub 4-0:1.0: state 7 ports 4 chg 0000 evt 0002 [ 56.154986] usb usb4-port1: link state change [ 56.154992] usb usb4-port1: config error [ 56.154998] usb usb4-port1: do warm reset [ 56.211565] usb usb4-port1: not warm reset yet, waiting 50ms [ 56.271586] usb usb4-port1: not warm reset yet, waiting 200ms [ 56.323613] usb usb3-port1: not reset yet, waiting 200ms [ 56.479712] usb usb4-port1: not warm reset yet, waiting 200ms [ 56.531780] hub 3-0:1.0: port_wait_reset: err = -11 [ 56.531782] usb usb3-port1: not enabled, trying reset again... [ 56.687859] usb usb4-port1: not warm reset yet, waiting 200ms [ 56.739868] usb usb3-port1: not reset yet, waiting 200ms [ 56.895921] usb usb4-port1: not warm reset yet, waiting 200ms [ 56.895968] usb usb4-port1: not enabled, trying warm reset again... [ 56.947985] usb usb3-port1: not reset yet, waiting 200ms [ 57.104107] usb usb4-port1: not warm reset yet, waiting 200ms [ 57.153101] usb 1-1.1: usb auto-suspend, wakeup 1 [ 57.156105] usb usb3-port1: not reset yet, waiting 200ms [ 57.172112] hub 1-1:1.0: hub_suspend [ 57.174484] usb 1-1: usb auto-suspend, wakeup 1 [ 57.192189] usb 1-1: usb auto-resume [ 57.260183] usb 1-1: Waited 0ms for CONNECT [ 57.260195] usb 1-1: finish resume [ 57.260706] hub 1-1:1.0: hub_resume [ 57.260932] usb 1-1-port1: status 0507 change 0000 [ 57.261192] usb 1-1-port2: status 0107 change 0000 [ 57.261433] usb 1-1-port3: status 0507 change 0000 [ 57.262005] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 57.262298] usb 1-1.1: usb auto-resume [ 57.312209] usb usb4-port1: not warm reset yet, waiting 200ms [ 57.328420] usb 1-1.1: Waited 0ms for CONNECT [ 57.328422] usb 1-1.1: finish resume [ 57.364248] hub 3-0:1.0: port_wait_reset: err = -11 [ 57.364250] usb usb3-port1: not enabled, trying reset again... [ 57.520301] usb usb4-port1: not warm reset yet, waiting 200ms [ 57.572338] usb usb3-port1: not reset yet, waiting 200ms [ 57.728421] usb usb4-port1: not warm reset yet, waiting 200ms [ 57.728466] xhci_hcd 0000:00:14.0: CTRL: TypeReq=0x2303 val=0x5 idx=0x301 len=0 ==> -19 [ 57.728472] hub 4-0:1.0: state 7 ports 4 chg 0000 evt 0002 [ 57.728478] usb usb4-port1: config error [ 57.780457] usb usb3-port1: not reset yet, waiting 200ms [ 57.988555] usb usb3-port1: not reset yet, waiting 200ms [ 58.196685] usb usb3-port1: not reset yet, waiting 200ms [ 58.196758] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0002 [ 58.196770] usb usb3-port1: status 0100, change 0001, 12 Mb/s [ 58.412811] usb usb3-port1: debounce total 150ms stable 100ms status 0x101
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1796253 Title: With one flash drive connected other flash drive doesn't connect anymore Status in linux package in Ubuntu: Incomplete Bug description: I have a Toshiba L855 laptop at home. When I connect any usb device to a USB3 port before boot then no other USB device doesn't work and even detected after boot. This concern even USB mouse and keyboard. But when I reconnect all USB devices to laptop then they started to work. I see this behaviour on every ubuntu 16.04.5 linux kernel i.e. version 4.15, so I suspect that it is due to some linux-extra-module. I have also windows 7 OS on the same laptop and I have never struck such a problem there. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-modules-extra-4.15.0-36-generic 4.15.0-36.39~16.04.1 ProcVersionSignature: Ubuntu 4.15.0-36.39~16.04.1-generic 4.15.18 Uname: Linux 4.15.0-36-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.18 Architecture: amd64 CurrentDesktop: GNOME-Flashback:Unity Date: Fri Oct 5 12:17:20 2018 SourcePackage: linux-hwe UpgradeStatus: Upgraded to xenial on 2018-05-25 (132 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1796253/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
