This bug was fixed in the package e2fsprogs - 1.45.1-1ubuntu1 --------------- e2fsprogs (1.45.1-1ubuntu1) eoan; urgency=medium
* Use 4k blocksize in all ext4 mke2fs.conf such that lvm migration between non-4k PVs and 4k PVs works irrespective of the volume size. LP: #1817097 -- Dimitri John Ledkov <x...@ubuntu.com> Wed, 15 May 2019 16:15:22 +0200 ** Changed in: e2fsprogs (Ubuntu) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1817097 Title: pvmove causes file system corruption without notice upon move from 512 -> 4096 logical block size devices Status in lvm2: Confirmed Status in Ubuntu on IBM z Systems: Incomplete Status in e2fsprogs package in Ubuntu: Fix Released Status in linux package in Ubuntu: Invalid Status in lvm2 package in Ubuntu: Invalid Bug description: Problem Description--- Summary ======= Environment: IBM Z13 LPAR and z/VM Guest IBM Type: 2964 Model: 701 NC9 OS: Ubuntu 18.10 (GNU/Linux 4.18.0-13-generic s390x) Package: lvm2 version 2.02.176-4.1ubuntu3 LVM: pvmove operation corrupts file system when using 4096 (4k) logical block size and default block size being 512 bytes in the underlying devices The problem is immediately reproducible. We see a real usability issue with data destruction as consequence - which is not acceptable. We expect 'pvmove' to fail with error in such situations to prevent fs destruction, which might possibly be overridden by a force flag. Details ======= After a 'pvmove' operation is run to move a physical volume onto an ecrypted device with 4096 bytes logical block size we experience a file system corruption. There is no need for the file system to be mounted, but the problem surfaces differently if so. Either, the 'pvs' command after the pvmove shows /dev/LOOP_VG/LV: read failed after 0 of 1024 at 0: Invalid argument /dev/LOOP_VG/LV: read failed after 0 of 1024 at 314507264: Invalid argument /dev/LOOP_VG/LV: read failed after 0 of 1024 at 314564608: Invalid argument /dev/LOOP_VG/LV: read failed after 0 of 1024 at 4096: Invalid argument or a subsequent mount shows (after umount if the fs had previously been mounted as in our setup) mount: /mnt: wrong fs type, bad option, bad superblock on /dev/mapper/LOOP_VG-LV, missing codepage or helper program, or other error. A minimal setup of LVM using one volume group with one logical volume defined, based on one physical volume is sufficient to raise the problem. One more physical volume of the same size is needed to run the pvmove operation to. LV | VG: LOOP_VG [ ] | PV: /dev/loop0 --> /dev/mapper/enc-loop ( backed by /dev/mapper/enc-loop ) The physical volumes are backed by loopback devices (losetup) to base the problem report on, but we have seen the error on real SCSI multipath volumes also, with and without cryptsetup mapper devices in use. Further discussion ================== https://www.saout.de/pipermail/dm-crypt/2019-February/006078.html The problem does not occur on block devices with native size of 4k. E.g. DASDs, or file systems with mkfs -b 4096 option. Terminal output =============== See attached file pvmove-error.txt Debug data ========== pvmove was run with -dddddd (maximum debug level) See attached journal file. Contact Information = christian.r...@de.ibm.com ---uname output--- Linux system 4.18.0-13-generic #14-Ubuntu SMP Wed Dec 5 09:00:35 UTC 2018 s390x s390x s390x GNU/Linux Machine Type = IBM Type: 2964 Model: 701 NC9 ---Debugger--- A debugger is not configured ---Steps to Reproduce--- 1.) Create two image files of 500MB in size and set up two loopback devices with 'losetup -fP FILE' 2.) Create one physical volume and one volume group 'LOOP_VG', and one logical volume 'VG' Run: pvcreate /dev/loop0 vgcreate LOOP_VG /dev/loop0 lvcreate -L 300MB LOOP_VG -n LV /dev/loop0 3.) Create a file system on the logical volume device: mkfs.ext4 /dev/mapper/LOOP_VG-LV 4.) mount the file system created in the previous step to some empty available directory: mount /dev/mapper/LOOP_VG-LV /mnt 5.) Set up a second physical volume, this time encrypted with LUKS2, and open the volume to make it available: cryptsetup luksFormat --type luks2 --sector-size 4096 /dev/loop1 cryptsetup luksOpen /dev/loop1 enc-loop 6.) Create the second physical volume, and add it to the LOOP_VG pvcreate /dev/mapper/enc-loop vgextend LOOP_VG /dev/mapper/enc-loop 7.) Ensure the new physical volume is part of the volume group: pvs 8.) Move the /dev/loop0 volume onto the encrypted volume with maximum debug option: pvmove -dddddd /dev/loop0 /dev/mapper/enc-loop 9.) The previous step succeeds, but corrupts the file system on the logical volume We expect an error here. There might be a command line flag to override used because corruption does not cause a data loss. Userspace tool common name: pvmove The userspace tool has the following bit modes: 64bit Userspace rpm: lvm2 in versoin 2.02.176-4.1ubuntu3 Userspace tool obtained from project website: na *Additional Instructions for christian.r...@de.ibm.com: -Attach ltrace and strace of userspace application. To manage notifications about this bug go to: https://bugs.launchpad.net/lvm2/+bug/1817097/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp