Happens to me sometimes when powering on from suspend -- any USB device plugged in will get the following:
usb 5-1: new full-speed USB device number 21 using uhci_hcd usb 5-1: device descriptor read/64, error -110 No plugged-in USB device will be properly detected until a cold boot -- camera, mouse, keyboard or harddrive. This is Ubuntus 12.10 through 13.10; may be a hardware problem, but again: it only happens to me after the computer has been in Suspend power mode, and not every time. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/433438 Title: device descriptor read/64, error -110 Status in The Linux Kernel: New Status in “linux” package in Ubuntu: Won't Fix Status in “linux” source package in Lucid: Confirmed Bug description: it's a Gnome 2.26.1 kernel 2.6.28-15-generic ICH10 family machine and i got this mesg on start up - i have to wait for my keyboard and mouse about 2 min., just have a look ... dmesg [ 0.380028] usbcore: registered new interface driver usbfs [ 0.380030] usbcore: registered new interface driver hub [ 0.380038] usbcore: registered new device driver usb [ 4.666088] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.666098] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 4.666100] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 4.666136] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.670043] ehci_hcd 0000:00:1a.7: debug port 1 [ 4.670047] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 4.670055] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00 [ 4.684007] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.684062] usb usb1: configuration #1 chosen from 1 choice [ 4.684086] hub 1-0:1.0: USB hub found [ 4.684093] hub 1-0:1.0: 6 ports detected [ 4.684185] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.684192] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 4.684194] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.684218] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 4.688111] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.688115] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 4.688123] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800 [ 4.704007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.704063] usb usb2: configuration #1 chosen from 1 choice [ 4.704091] hub 2-0:1.0: USB hub found [ 4.704098] hub 2-0:1.0: 6 ports detected [ 4.704180] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.704189] uhci_hcd: USB Universal Host Controller Interface driver [ 4.704200] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.704204] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.704206] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.704230] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 4.704247] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 [ 4.704291] usb usb3: configuration #1 chosen from 1 choice [ 4.704307] hub 3-0:1.0: USB hub found [ 4.704311] hub 3-0:1.0: 2 ports detected [ 4.704361] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 4.704365] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 4.704367] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 4.704390] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 4.704414] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 4.704455] usb usb4: configuration #1 chosen from 1 choice [ 4.704469] hub 4-0:1.0: USB hub found [ 4.704473] hub 4-0:1.0: 2 ports detected [ 4.704521] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.704525] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 4.704527] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 4.704550] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 4.704567] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00 [ 4.704612] usb usb5: configuration #1 chosen from 1 choice [ 4.704626] hub 5-0:1.0: USB hub found [ 4.704630] hub 5-0:1.0: 2 ports detected [ 4.704677] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.704681] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.704683] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.704709] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 4.704726] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 [ 4.704770] usb usb6: configuration #1 chosen from 1 choice [ 4.704784] hub 6-0:1.0: USB hub found [ 4.704789] hub 6-0:1.0: 2 ports detected [ 4.704839] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.704843] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 4.704845] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.704868] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 4.704885] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 4.704927] usb usb7: configuration #1 chosen from 1 choice [ 4.704942] hub 7-0:1.0: USB hub found [ 4.704945] hub 7-0:1.0: 2 ports detected [ 4.704993] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.704997] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4.704999] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.705022] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 4.705039] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 [ 4.705083] usb usb8: configuration #1 chosen from 1 choice [ 4.705097] hub 8-0:1.0: USB hub found [ 4.705102] hub 8-0:1.0: 2 ports detected [ 20.276030] usb 2-3: device descriptor read/64, error -110 [ 35.492048] usb 2-3: device descriptor read/64, error -110 [ 35.708047] usb 2-3: new high speed USB device using ehci_hcd and address 4 [ 50.820040] usb 2-3: device descriptor read/64, error -110 [ 61.381794] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 61.381796] Bluetooth: BNEP filters: protocol multicast [ 61.410111] Bridge firewalling registered [ 66.036035] usb 2-3: device descriptor read/64, error -110 [ 66.252035] usb 2-3: new high speed USB device using ehci_hcd and address 5 [ 66.500016] Clocksource tsc unstable (delta = -171322583 ns) [ 71.272063] usb 2-3: device descriptor read/8, error -110 [ 76.392065] usb 2-3: device descriptor read/8, error -110 [ 76.608037] usb 2-3: new high speed USB device using ehci_hcd and address 6 [ 81.628067] usb 2-3: device descriptor read/8, error -110 [ 86.748066] usb 2-3: device descriptor read/8, error -110 [ 86.852045] hub 2-0:1.0: unable to enumerate USB device on port 3 [ 87.284033] usb 6-2: new full speed USB device using uhci_hcd and address 2 [ 87.439063] usb 6-2: config 1 has an invalid descriptor of length 26, skipping remainder of the config [ 87.439067] usb 6-2: config 1 interface 0 has no altsetting 0 [ 87.466507] usb 6-2: configuration #1 chosen from 1 choice [ 87.530847] usblp0: USB Bidirectional printer dev 2 if 0 alt 2 proto 2 vid 0x04B4 pid 0x4100 [ 87.530860] usbcore: registered new interface driver usblp [ 87.712536] usb 7-1: new full speed USB device using uhci_hcd and address 2 [ 88.240237] ppdev: user-space parallel port driver [ 91.210279] ATL1E 0000:02:00.0: irq 2299 for MSI/MSI-X [ 91.210405] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 91.210454] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 91.210572] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 101.364047] eth0: no IPv6 routers present [ 102.824080] usb 7-1: device descriptor read/64, error -110 [ 118.040073] usb 7-1: device descriptor read/64, error -110 [ 118.256069] usb 7-1: new full speed USB device using uhci_hcd and address 3 [ 133.368056] usb 7-1: device descriptor read/64, error -110 [ 148.584063] usb 7-1: device descriptor read/64, error -110 [ 148.800046] usb 7-1: new full speed USB device using uhci_hcd and address 4 [ 153.821896] usb 7-1: device descriptor read/8, error -110 [ 158.941471] usb 7-1: device descriptor read/8, error -110 [ 159.156067] usb 7-1: new full speed USB device using uhci_hcd and address 5 [ 164.178075] usb 7-1: device descriptor read/8, error -110 [ 169.297631] usb 7-1: device descriptor read/8, error -110 [ 169.400105] hub 7-0:1.0: unable to enumerate USB device on port 1 [ 169.648054] usb 8-1: new full speed USB device using uhci_hcd and address 2 [ 169.844421] usb 8-1: configuration #1 chosen from 1 choice [ 169.883688] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 169.883749] usbcore: registered new interface driver btusb [ 170.084052] usb 8-2: new low speed USB device using uhci_hcd and address 3 [ 170.260569] usb 8-2: configuration #1 chosen from 1 choice [ 170.290565] usbcore: registered new interface driver hiddev [ 170.290627] usbcore: registered new interface driver usbhid [ 170.290630] usbhid: v2.6:USB HID core driver To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/433438/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp