** Description changed: [Impact] Flow control parameters of fibre port can not be set after enable flow control autoneg, as flow control autoneg is unsupported for fibre port [Test Case] + Turning on/off tx pause and ethtool shall report status accordingly. [Fix] fb89629f2ecf net: hns3: fix flow control configure issue for fibre port [Regression Risk] Patch restricted to hns3 driver. - "[Bug Description] Flow control parameters of fibre port can not be set after enable flow control autoneg, as flow control autoneg is unsupported for fibre port. [Steps to Reproduce] 1.link up fibre port and enable flow control autoneg 2.check status of tx pause and rx pause 3.turn off tx pause 4.checkout status of tx pause [Actual Results] tx pause is on [Expected Results] tx pause is off [Reproducibility] Inevitably [Additional information] Hardware: D06 Firmware: NA Kernel: NA [Resolution] This patch return -EOPNOTSUPP when user tries to enable flow control autoneg." net: hns3: fix flow control configure issue for fibre port
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1853948 Title: [hns-1126]net: hns3: fix flow control configure issue for fibre port Status in kunpeng920: In Progress Status in kunpeng920 ubuntu-18.04 series: In Progress Status in kunpeng920 ubuntu-18.04-hwe series: Fix Committed Status in kunpeng920 ubuntu-19.04 series: In Progress Status in kunpeng920 ubuntu-19.10 series: Fix Released Status in kunpeng920 upstream-kernel series: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux source package in Bionic: In Progress Status in linux source package in Disco: In Progress Status in linux source package in Eoan: Fix Released Status in linux source package in Focal: Fix Released Bug description: [Impact] Flow control parameters of fibre port can not be set after enable flow control autoneg, as flow control autoneg is unsupported for fibre port [Test Case] Turning on/off tx pause and ethtool shall report status accordingly. [Fix] fb89629f2ecf net: hns3: fix flow control configure issue for fibre port [Regression Risk] Patch restricted to hns3 driver. "[Bug Description] Flow control parameters of fibre port can not be set after enable flow control autoneg, as flow control autoneg is unsupported for fibre port. [Steps to Reproduce] 1.link up fibre port and enable flow control autoneg 2.check status of tx pause and rx pause 3.turn off tx pause 4.checkout status of tx pause [Actual Results] tx pause is on [Expected Results] tx pause is off [Reproducibility] Inevitably [Additional information] Hardware: D06 Firmware: NA Kernel: NA [Resolution] This patch return -EOPNOTSUPP when user tries to enable flow control autoneg." net: hns3: fix flow control configure issue for fibre port To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1853948/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
