Update: The scrub back on 4.15 went as expected. I rebooted with 5.3
kernel and tried the scrub again. I saw the same behaviour: the scrub
started, with a very fast rate and short time estimate (3-5 minutes),
and then reached 100% after about that time. However it continued to say
it was in progress, despite saying 100.00% done. It did not calcualte a
time estimate, saying the rate was slow, however, it did complete after
3h36 (so fast than it used to on kernel 4.15).
eric@eric-8700K:~$ zpool status
pool: storagepool1
state: ONLINE
scan: scrub repaired 0B in 3h36m with 0 errors on Sat Jan 18 14:50:16 2020
config:
NAME STATE READ WRITE CKSUM
storagepool1 ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0
ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0
ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0
errors: No known data errors
I started a scrub again to see whether it was just the first time with this
kernel, but again the % complete seems inaccurate, and the time remaining is
definitely inaccurate (0h0m shortly after starting).
So at the very least it is clear that zpool status is not accurately
reporting the scrub process on kernel 5.3.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to zfs-linux in Ubuntu.
https://bugs.launchpad.net/bugs/1860182
Title:
zpool scrub malfunction after kernel upgrade
Status in zfs-linux package in Ubuntu:
Triaged
Bug description:
I ran a zpool scrub prior to upgrading my 18.04 to the latest HWE
kernel (5.3.0-26-generic #28~18.04.1-Ubuntu) and it ran properly:
eric@eric-8700K:~$ zpool status
pool: storagepool1
state: ONLINE
scan: scrub repaired 1M in 4h21m with 0 errors on Fri Jan 17 07:01:24 2020
config:
NAME STATE READ WRITE CKSUM
storagepool1 ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0
ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0
ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0
I ran zpool scrub after upgrading the kernel and rebooting, and now it
fails to work properly. It appeared to finish in about 5 minutes but
did not, and says it is going slow:
eric@eric-8700K:~$ sudo zpool status
pool: storagepool1
state: ONLINE
scan: scrub in progress since Fri Jan 17 15:32:07 2020
1.89T scanned out of 1.89T at 589M/s, (scan is slow, no estimated time)
0B repaired, 100.00% done
config:
NAME STATE READ WRITE CKSUM
storagepool1 ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0
ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0
ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0
errors: No known data errors
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: zfsutils-linux 0.7.5-1ubuntu16.7
ProcVersionSignature: Ubuntu 5.3.0-26.28~18.04.1-generic 5.3.13
Uname: Linux 5.3.0-26-generic x86_64
NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair
ApportVersion: 2.20.9-0ubuntu7.9
Architecture: amd64
CurrentDesktop: ubuntu:GNOME
Date: Fri Jan 17 16:22:01 2020
InstallationDate: Installed on 2018-03-07 (681 days ago)
InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1)
SourcePackage: zfs-linux
UpgradeStatus: Upgraded to bionic on 2018-08-02 (533 days ago)
modified.conffile..etc.sudoers.d.zfs: [inaccessible: [Errno 13] Permission
denied: '/etc/sudoers.d/zfs']
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1860182/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
