18.04.4 has now been released.
** Changed in: kunpeng920/ubuntu-19.04
Status: Fix Committed => Fix Released
** Changed in: kunpeng920/ubuntu-19.04
Milestone: None => ubuntu-19.04-sru-12
** Changed in: kunpeng920/ubuntu-18.04-hwe
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1853948
Title:
[hns-1126]net: hns3: fix flow control configure issue for fibre port
Status in kunpeng920:
In Progress
Status in kunpeng920 ubuntu-18.04 series:
In Progress
Status in kunpeng920 ubuntu-18.04-hwe series:
Fix Released
Status in kunpeng920 ubuntu-19.04 series:
Fix Released
Status in kunpeng920 ubuntu-19.10 series:
Fix Released
Status in kunpeng920 upstream-kernel series:
Fix Released
Status in linux package in Ubuntu:
Fix Released
Status in linux source package in Bionic:
In Progress
Status in linux source package in Disco:
Fix Released
Status in linux source package in Eoan:
Fix Released
Status in linux source package in Focal:
Fix Released
Bug description:
[Impact]
Flow control parameters of fibre port can not be set after enable flow
control autoneg, as flow control autoneg is unsupported for fibre port
[Test Case]
Turning on/off tx pause and ethtool shall report status accordingly.
[Fix]
fb89629f2ecf net: hns3: fix flow control configure issue for fibre port
[Regression Risk]
Patch restricted to hns3 driver.
"[Bug Description]
Flow control parameters of fibre port can not be set after enable flow
control autoneg, as flow control autoneg is unsupported for fibre port.
[Steps to Reproduce]
1.link up fibre port and enable flow control autoneg
2.check status of tx pause and rx pause
3.turn off tx pause
4.checkout status of tx pause
[Actual Results]
tx pause is on
[Expected Results]
tx pause is off
[Reproducibility]
Inevitably
[Additional information]
Hardware: D06
Firmware: NA
Kernel: NA
[Resolution]
This patch return -EOPNOTSUPP when user tries to enable flow control autoneg."
net: hns3: fix flow control configure issue for fibre port
To manage notifications about this bug go to:
https://bugs.launchpad.net/kunpeng920/+bug/1853948/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
