** Changed in: maas
Milestone: 2.8.0 => 2.9.0b1
** Changed in: maas
Status: Triaged => Fix Committed
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1881821
Title:
MAAS does not properly detect max interface speed for interfaces which
use multiple phyiscal ports(Cisco UCS B200 M5 blade)
Status in MAAS:
Fix Committed
Status in MAAS 2.7 series:
Triaged
Status in MAAS 2.8 series:
Triaged
Status in linux package in Ubuntu:
Invalid
Bug description:
MAAS 2.7.1
Ubuntu 18.04.4
When attempting to commission a Cisco UCS B200 M5 blade, the
commissioning finishes (if smartctl-validate is disabled), however on
the machine in question in the Networking tab, it only shows 2 nics,
eth0 and eth1. and shows no storage.
Going to SSH in the middle of commissioning, running lshw shows all 10
NICs, and the disk of the proper size.
This is causing the buckets.yaml for FCE to be inaccurate, and thus
cannot write a bucketsconfig.yaml since the actual devices don't show
up.
This was tried with bionic {ga,hwe,hwe-edge} and focal ga kernels for
commissioning, all have the same behavior.
I was previously hitting this bug
https://bugs.launchpad.net/maas/+bug/1878643 but applied the fix from
comment #10, and am no longer getting any commissioning errors.
To manage notifications about this bug go to:
https://bugs.launchpad.net/maas/+bug/1881821/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
