Same tests as above. Still working as intended ** Tags removed: patch verification-needed verification-needed-focal ** Tags added: verification-done verification-done-focal
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1887490 Title: [FFe/SRU] Add/Backport EPYC-v3 and EPYC-Rome CPU model Status in libvirt package in Ubuntu: Fix Released Status in linux package in Ubuntu: Fix Released Status in qemu package in Ubuntu: Fix Released Status in libvirt source package in Focal: Fix Committed Status in linux source package in Focal: Fix Released Status in qemu source package in Focal: Fix Released Bug description: [Impact] * CPU definitions are added to libvirt as these CPUs are known and added to qemu for execution. And due to that over time some are considered missing in former releases. * To really benefit from the new features of these chips they have to be known, therefore new type additions done by upstream should be backported if they generally apply and do not depend on SRU-critical changes. * This backports three upstream fixes that just add definitions (no control flow changes) [Test Case] * Check if it has an EPYC-Rome entry in /usr/share/libvirt/cpu_map/index.xml and the file included there exists. * Define a guest like: <cpu mode='custom' match='exact' check='partial'> <model fallback='forbid'>EPYC-Rome</model> </cpu> You can only "really" start this on a system with the matching HW. But even on others it will change from: error: internal error: Unknown CPU model EPYC-Rome to being unable to start for some features missing. * libvirt probes a system if a named cpu can be used, after the fix this should include EPYC-Rome $ virsh domcapabilities | grep EPYC <model usable='no'>EPYC-IBPB</model> <model usable='no'>EPYC</model> [Regression Potential] * Usually these type additions are safe unless they add control flow changes (e.g. to handle yet unknown types of registers or such) but that isn't the case here. A regression if any is to be expected on systems that are close to the newly added type(s). Those will after the update be detected as such if e.g. host-model is used. If then running on a mixed cluster of updated/non-updated systems migrations will only work if the target is updated as well. [Other Info] * This is the first build since glibc 2.32 arrived in groovy, hence we need to be careful of the fix done for bug 1892826. It has to be checked if the linking is fine after the rebuild. The workload still works in groovy despite 2.32 being present (I'd ahve expected it doesn't), so we will keep the revert as-is for now. To be sure that adds two tests that shall be done: - check the linking to point to libtirpc instead of glibc $ eu-readelf -a /usr/lib/libvirt/libvirt_lxc | grep xdr_uint64 | grep GLOBAL Was pointing to glibc, does it still and if so does it work (see below)? - run the autopkgtest cases as the LXC tests would trigger an issue if there is one ---- ## Qemu SRU ## [Impact] * CPU definitions are added to qemu as these CPUs are known. And due to that over time are missing in former releases. * To really benefit from the new features of these chips they have to be known, therefore new type additions done by upstream should be backported if they generally apply and do not depend on SRU-critical changes. * This backports two upstream fixes that just add definitions (no control flow changes) [Test Case] * Probe qemu for the known CPU types (works on all HW) $ qemu-system-x86_64 -cpu ? | grep EPYC Focal without fix: x86 EPYC (alias configured by machine type) x86 EPYC-IBPB (alias of EPYC-v2) x86 EPYC-v1 AMD EPYC Processor x86 EPYC-v2 AMD EPYC Processor (with IBPB) Focal with fix also adds: x86 EPYC-Rome (alias configured by machine type) x86 EPYC-Rome-v1 AMD EPYC-Rome Processor x86 EPYC-v3 AMD EPYC Processor * Given such HW is available start a KVM guest using those new types Since we don't have libvirt support (yet) do so directly in qemu commandline like (bootloader is enough) $ qemu-system-x86_64 -cpu EPYC-Rome -machine pc-q35-focal,accel=kvm -nographic $ qemu-system-x86_64 -cpu EPYC-v3 -machine pc-q35-focal,accel=kvm -nographic [Regression Potential] * This adds new CPU types to the list of known CPUs defining their name and features. Generally the changes are contained to those new types and only active when selected - and usually only selectable on such new machines. Therefore not a lot should change for other users. One thing thou, if a user selected an unversioned type (which in this case only can be "EPYC") by default it will pick the latest subversion that applies. In this case the behavior will change and pick EPYC-v3 after the fix. But this is the whole purpose of versioned (stay as is) and unversioned (move with updates) CPU types - so that should be ok. The EPYC-Rome type didn't exist in Focal before, so it can't "change" for users. [Other Info] * Depends on the new kernel 5.4.0-49 or later (Currently in focal-proposed) --- Qemu in focal has already support for most (except amd-stibp) flags of this model. Please backport the following patches: https://github.com/qemu/qemu/commit/a16e8dbc043720abcb37fc7dca313e720b4e0f0c https://github.com/qemu/qemu/commit/143c30d4d346831a09e59e9af45afdca0331e819 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1887490/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
