Hello Dave, or anyone else affected, Accepted bluez into groovy-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/bluez/5.55-0ubuntu1.1 in a few hours, and then in the -proposed repository.
Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- groovy to verification-done-groovy. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-groovy. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Changed in: bluez (Ubuntu Groovy) Status: New => Fix Committed ** Tags added: verification-needed verification-needed-groovy ** Description changed: [Impact] Without these patches, Bluetooth is inoperable on the recently released Raspberry Pi 400. [Test Case] * Boot the Ubuntu Desktop for Pi image on a Pi 400. * Start the Settings application and switch to the Bluetooth tab * Verify that Bluetooth is not enabled and attempting to activate it fails - * sudo add-apt-repository ppa:waveform/pi-bluetooth + * Enable the -proposed repository for the release (groovy) * sudo apt update * sudo apt install bluez * sudo reboot * Start the Settings application and switch to the Bluetooth tab - * Verify that Bluetooth is active and that Bluetooth devices (e.g. mice, mobile phones, headphones, etc.) can connect and operate correctly + * Verify that Bluetooth is active and that Bluetooth devices (e.g. mice, mobile phones, headphones, etc.) can connect and operate correctly [Regression Potential] Extremely low (on groovy in particular, this has the same version of bluez as hirsute). The only significant risk is to non-Pi platforms or dongles which also use the Broadcom 43xx (or Cypress 305) chips for Bluetooth which might be inadvertently affected by these patches. [Original Description] The new Pi 400 has a slightly different Wifi/BT chip to the Pi4. Whilst wifi works happily, Bluetooth fails to operate. This doesn't appear to be an issue with either the firmware (the latest versions from upstream Raspbian have been tried), or the kernel (a known-good raspi kernel has been tested under Ubuntu), but with Bluez itself. Specifically, tracing the initialization with btmon on Raspbian and Ubuntu, the stack consistently fails when attempting to "Set Default PHY" on the latter. Curiously, under Ubuntu the adapter also appears to lack a MAC address. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1903048 Title: [SRU] Bluetooth won't activate on the pi 400 Status in bluez package in Ubuntu: Triaged Status in bluez source package in Groovy: Fix Committed Status in bluez source package in Hirsute: Triaged Bug description: [Impact] Without these patches, Bluetooth is inoperable on the recently released Raspberry Pi 400. [Test Case] * Boot the Ubuntu Desktop for Pi image on a Pi 400. * Start the Settings application and switch to the Bluetooth tab * Verify that Bluetooth is not enabled and attempting to activate it fails * Enable the -proposed repository for the release (groovy) * sudo apt update * sudo apt install bluez * sudo reboot * Start the Settings application and switch to the Bluetooth tab * Verify that Bluetooth is active and that Bluetooth devices (e.g. mice, mobile phones, headphones, etc.) can connect and operate correctly [Regression Potential] Extremely low (on groovy in particular, this has the same version of bluez as hirsute). The only significant risk is to non-Pi platforms or dongles which also use the Broadcom 43xx (or Cypress 305) chips for Bluetooth which might be inadvertently affected by these patches. [Original Description] The new Pi 400 has a slightly different Wifi/BT chip to the Pi4. Whilst wifi works happily, Bluetooth fails to operate. This doesn't appear to be an issue with either the firmware (the latest versions from upstream Raspbian have been tried), or the kernel (a known-good raspi kernel has been tested under Ubuntu), but with Bluez itself. Specifically, tracing the initialization with btmon on Raspbian and Ubuntu, the stack consistently fails when attempting to "Set Default PHY" on the latter. Curiously, under Ubuntu the adapter also appears to lack a MAC address. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1903048/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
