This bug was fixed in the package linux-raspi - 5.4.0-1028.31
---------------
linux-raspi (5.4.0-1028.31) focal; urgency=medium
* focal/linux-raspi: 5.4.0-1028.31 -proposed tracker (LP: #1911311)
[ Ubuntu: 5.4.0-63.71 ]
* focal/linux: 5.4.0-63.71 -proposed tracker (LP: #1911333)
* overlay: permission regression in 5.4.0-51.56 due to patches related to
CVE-2020-16120 (LP: #1900141)
- ovl: do not fail because of O_NOATIME
* Focal update: v5.4.79 upstream stable release (LP: #1907151)
- net/mlx5: Use async EQ setup cleanup helpers for multiple EQs
- net/mlx5: poll cmd EQ in case of command timeout
- net/mlx5: Fix a race when moving command interface to events mode
- net/mlx5: Add retry mechanism to the command entry index allocation
* Kernel 5.4.0-56 Wi-Fi does not connect (LP: #1906770)
- mt76: fix fix ampdu locking
* [Ubuntu 21.04 FEAT] mpt3sas: Request to include the patch set which supports
topology where zoning is enabled in expander (LP: #1899802)
- scsi: mpt3sas: Define hba_port structure
- scsi: mpt3sas: Allocate memory for hba_port objects
- scsi: mpt3sas: Rearrange _scsih_mark_responding_sas_device()
- scsi: mpt3sas: Update hba_port's sas_address & phy_mask
- scsi: mpt3sas: Get device objects using sas_address & portID
- scsi: mpt3sas: Rename transport_del_phy_from_an_existing_port()
- scsi: mpt3sas: Get sas_device objects using device's rphy
- scsi: mpt3sas: Update hba_port objects after host reset
- scsi: mpt3sas: Set valid PhysicalPort in SMPPassThrough
- scsi: mpt3sas: Handling HBA vSES device
- scsi: mpt3sas: Add bypass_dirty_port_flag parameter
- scsi: mpt3sas: Handle vSES vphy object during HBA reset
- scsi: mpt3sas: Add module parameter multipath_on_hba
- scsi: mpt3sas: Bump driver version to 35.101.00.00
[ Ubuntu: 5.4.0-62.70 ]
* focal/linux: 5.4.0-62.70 -proposed tracker (LP: #1911144)
* CVE-2020-28374
- SAUCE: target: fix XCOPY NAA identifier lookup
* Packaging resync (LP: #1786013)
- update dkms package versions
linux-raspi (5.4.0-1027.30) focal; urgency=medium
* focal/linux-raspi: 5.4.0-1027.30 -proposed tracker (LP: #1910016)
* rpi3b+ wifi doesn't get used if ethernet disconnected (LP: #1890487)
- net: lan78xx: Ack pending PHY ints when resetting
* focal/linux-raspi: Upstream raspberrypi patchset 2020-12-10 (LP: #1908077)
- ARM: dts: Limit BT modem baud rate on 3B
- configs: Enable CHACHA20POLY1305=m
- overlays: Update i2c0 overlay to disable the i2c0mux.
- dt: Remove duplicate assignment for i2c0 pinctrl config
- overlays: Add option for composite to vc4-kms-v3d-pi4.
- minor typo in directions
- overlays: Regenerate upstream-pi4 overlay
- overlays: Add parameters to adafruit18, sainsmart18
- rpivid_h265: Fix width/height typo
- overlays: Add extra CMA sizes (up to 512M)
- overlays: Add note to BCM2711 overlays
- overlays: adafruit18,sainsmart18: default bgr to off
- configs: Remove I2C_BRCMSTB from the kernel
- net: bcmgenet: Reset RBUF on first open
- ASoC: cs42xx8: Only define cs42xx8_of_match once
- configs: Regenerate the defconfigs
- staging: bcm2835-codec: Use a define the completion timeout
- staging: bcm2835-codec: Correct buffer number change on start streaming
- USB: gadget: f_hid: avoid crashes and log spam
- Update hy28b-overlay.dts
- overlays: Update display GPIO declarations
- SQUASH: USB: gadget: f_hid: remove more spam
- configs: Add CONFIG_RTC_DRV_SD3078=m
- overlays: Add sd3078 to the i2c-rtc overlay
- configs: Restore SND_PCM_OSS=m
- configs: Add MEMCG_SWAP support initially disabled
- dwc_otg: initialise sched_frame for periodic QHs that were parked
- arm64: configs: Enable Unicam support
- arm64: configs: Enable V4L2 test module support
- staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32
- staging: bcm2835-codec: Replace deprecated V4L2_PIX_FMT_BGR32
- ARM: bcm2711-rpi.dts: Unlock DMA channels 9 & 10
- gpio: Add gpio-fsm driver
- configs: Add CONFIG_GPIO_FSM=m
- overlays: Add fsm-demo overlay
- overlays: Add ghost-amp overlay
- Fixes a problem when module probes before i2c module is available
- uapi: Update V4L2_CID_USER_BCM2835_ISP_BASE due to upstream change
- Revert "Bluetooth: Check key sizes only when Secure Simple Pairing is
enabled"
- dtoverlays: Correct CSI2 settings for ov9281
- xhci: quirks: add link TRB quirk for VL805
- dts: Add CM4 to arm64 dt files
- dts: Tidy the Raspberry Pi Makefile entries
- staging: bcm2835-audio: Add disable-headphones flag
- ARM: dts: Disable headphone audio on Zeroes, CM4
- overlays: Enable headphone audio in audremap
- rpisense-fb: Set pseudo_pallete to prevent crash on fbcon takeover
- PiFi-40 defconfigs
- PiFi-40 Devicetree files
- PiFi-40 driver, Makefile and Kconfig
- dwc_otg: Minimise header and fix build warnings
- gpio-fsm: Fix a build warning
- rpivid_h625: Fix build warnings
- dwc_otg: Fix more build warnings
- bcm2708_fb: Fix a build warning
- bcm2835-pcm: Fix up multichannel pcm audio
- watchdog: bcm2835: Ignore params after the partition number
- firmware: raspberrypi: Add support for tryonce reboot flag
- phy: broadcom: split out the BCM54213PE from the BCM54210E IDs
- phy: broadcom: Add bcm54213pe configuration
- Allo boss2 driver
- Add allo boss2 overlay
- Add allo boss2 config
- Revert "mailbox: avoid timer start from callback"
- ARM: dts: Add bcm2711-rpi-400.dts
- overlays: Deprecate and delete the sdtweak overlay
- overlays: Complete the sdtweak excision
- ARM: dts: bcm27xx: Remove enable_headphones setting
- staging: vcsm-cma: Fix memory leak from not detaching dmabuf
- Update Allo Piano Dac Driver for 5.4.y kernels
- Overlay: Update Allo Piano Plus dac driver for 5.4.y kernels.
- Update volume controls in Allo Piano Dac Plus
- can: rx-offload: can_rx_offload_add_manual(): add new initialization
function
- dt-binding: can: mcp25xxfd: document device tree bindings
- can: mcp25xxfd: add regmap infrastructure
- can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN
- can: mcp25xxfd: add listen-only mode
- can: mcp25xxfd: mcp25xxfd_handle_eccif(): add ECC related errata and
update
log messages
- can: mcp25xxfd: mcp25xxfd_probe(): add SPI clk limit related errata
information
- can: mcp25xxfd: mcp25xxfd_ring_free(): fix memory leak during cleanup
- can: mcp25xxfd: mcp25xxfd_irq(): add missing initialization of variable
set_normal mode
- dt-binding: can: mcp25xxfd: documentation fixes
- dt-binding: can: mcp251xfd: narrow down wildcards in device tree bindings
to
"microchip,mcp251xfd"
- can: mcp25xxfd: narrow down wildcards in device tree bindings to
"microchip,mcp251xfd"
- can: mcp251xfd: rename driver files and subdir to mcp251xfd
- can: mcp251xfd: rename all user facing strings to mcp251xfd
- can: mcp251xfd: rename all remaining occurrence to mcp251xfd
- can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read
error messages
- can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci
warnings
- can: mcp251xfd: remove unneeded break
- mcp251xfd: add overlay
- Add mcp251xfd driver as module to RPI build configuration
- media: i2c: imx219: Selection compliance fixes
- media: bcm2835-unicam: Correctly handle error propagation for stream on
- media: bcm2835-unicam: Return early from stop_streaming() if stopped
- media: bcm2835-unicam: Clear clock state when stopping streaming
- ARM: dts: CM4 audio pins are not connected
- configs: Add RTC_DRV_PCF85063=m
- overlays: Add PCF85063 and PCF85063A to i2c-rtc
- overlays: Fix cut-and-paste error in README
- media: i2c: imx477: Selection compliance fixes
- SAUCE: net: bcmgenet: Remove empty line to match upstream
- [Config] raspi: updateconfigs after update to rpi-5.4.y 2020-12-10
[ Ubuntu: 5.4.0-60.67 ]
* Packaging resync (LP: #1786013)
- [Packaging] update variants
- update dkms package versions
* CVE-2021-1052 // CVE-2021-1053
- [Packaging] NVIDIA -- Add the NVIDIA 460 driver
-- Kleber Sacilotto de Souza <kleber.so...@canonical.com> Wed, 20 Jan
2021 11:27:41 +0100
** Changed in: linux-raspi (Ubuntu Focal)
Status: Fix Committed => Fix Released
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2020-16120
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2020-28374
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2021-1052
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2021-1053
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-raspi in Ubuntu.
https://bugs.launchpad.net/bugs/1908077
Title:
focal/linux-raspi: Upstream raspberrypi patchset 2020-12-10
Status in linux-raspi package in Ubuntu:
Confirmed
Status in linux-raspi source package in Focal:
Fix Released
Bug description:
Upstream raspberrypi patchset 2020-12-10
Ported from the following raspberrypi branch:
rpi-5.4.y
from https://github.com/raspberrypi/linux.git
media: i2c: imx477: Selection compliance fixes
overlays: Fix cut-and-paste error in README
overlays: Add PCF85063 and PCF85063A to i2c-rtc
configs: Add RTC_DRV_PCF85063=m
ARM: dts: CM4 audio pins are not connected
media: bcm2835-unicam: Clear clock state when stopping streaming
media: bcm2835-unicam: Return early from stop_streaming() if stopped
media: bcm2835-unicam: Correctly handle error propagation for stream on
media: i2c: imx219: Selection compliance fixes
Add mcp251xfd driver as module to RPI build configuration
mcp251xfd: add overlay
can: mcp251xfd: remove unneeded break
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read
error messages
can: mcp251xfd: rename all remaining occurrence to mcp251xfd
can: mcp251xfd: rename all user facing strings to mcp251xfd
can: mcp251xfd: rename driver files and subdir to mcp251xfd
can: mcp25xxfd: narrow down wildcards in device tree bindings to
"microchip,mcp251xfd"
dt-binding: can: mcp251xfd: narrow down wildcards in device tree bindings to
"microchip,mcp251xfd"
dt-binding: can: mcp25xxfd: documentation fixes
can: mcp25xxfd: mcp25xxfd_irq(): add missing initialization of variable
set_normal mode
can: mcp25xxfd: mcp25xxfd_ring_free(): fix memory leak during cleanup
can: mcp25xxfd: mcp25xxfd_probe(): add SPI clk limit related errata
information
can: mcp25xxfd: mcp25xxfd_handle_eccif(): add ECC related errata and update
log messages
can: mcp25xxfd: add listen-only mode
can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN
can: mcp25xxfd: add regmap infrastructure
dt-binding: can: mcp25xxfd: document device tree bindings
can: rx-offload: can_rx_offload_add_manual(): add new initialization function
Update volume controls in Allo Piano Dac Plus
Overlay: Update Allo Piano Plus dac driver for 5.4.y kernels.
Update Allo Piano Dac Driver for 5.4.y kernels
staging: vcsm-cma: Fix memory leak from not detaching dmabuf
ARM: dts: bcm27xx: Remove enable_headphones setting
overlays: Complete the sdtweak excision
overlays: Deprecate and delete the sdtweak overlay
ARM: dts: Add bcm2711-rpi-400.dts
Revert "mailbox: avoid timer start from callback"
Add allo boss2 config
Add allo boss2 overlay
Allo boss2 driver
phy: broadcom: Add bcm54213pe configuration
phy: broadcom: split out the BCM54213PE from the BCM54210E IDs
firmware: raspberrypi: Add support for tryonce reboot flag
watchdog: bcm2835: Ignore params after the partition number
bcm2835-pcm: Fix up multichannel pcm audio
bcm2708_fb: Fix a build warning
dwc_otg: Fix more build warnings
rpivid_h625: Fix build warnings
gpio-fsm: Fix a build warning
dwc_otg: Minimise header and fix build warnings
PiFi-40 driver, Makefile and Kconfig
PiFi-40 Devicetree files
PiFi-40 defconfigs
rpisense-fb: Set pseudo_pallete to prevent crash on fbcon takeover
overlays: Enable headphone audio in audremap
ARM: dts: Disable headphone audio on Zeroes, CM4
staging: bcm2835-audio: Add disable-headphones flag
dts: Tidy the Raspberry Pi Makefile entries
dts: Add CM4 to arm64 dt files
xhci: quirks: add link TRB quirk for VL805
dtoverlays: Correct CSI2 settings for ov9281
Revert "Bluetooth: Check key sizes only when Secure Simple Pairing is enabled"
uapi: Update V4L2_CID_USER_BCM2835_ISP_BASE due to upstream change
Fixes a problem when module probes before i2c module is available
overlays: Add ghost-amp overlay
overlays: Add fsm-demo overlay
configs: Add CONFIG_GPIO_FSM=m
gpio: Add gpio-fsm driver
ARM: bcm2711-rpi.dts: Unlock DMA channels 9 & 10
staging: bcm2835-codec: Replace deprecated V4L2_PIX_FMT_BGR32
staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32
arm64: configs: Enable V4L2 test module support
arm64: configs: Enable Unicam support
dwc_otg: initialise sched_frame for periodic QHs that were parked
configs: Add MEMCG_SWAP support initially disabled
configs: Restore SND_PCM_OSS=m
overlays: Add sd3078 to the i2c-rtc overlay
configs: Add CONFIG_RTC_DRV_SD3078=m
SQUASH: USB: gadget: f_hid: remove more spam
overlays: Update display GPIO declarations
Update hy28b-overlay.dts
USB: gadget: f_hid: avoid crashes and log spam
staging: bcm2835-codec: Correct buffer number change on start streaming
staging: bcm2835-codec: Use a define the completion timeout
configs: Regenerate the defconfigs
ASoC: cs42xx8: Only define cs42xx8_of_match once
net: bcmgenet: Reset RBUF on first open
configs: Remove I2C_BRCMSTB from the kernel
overlays: adafruit18,sainsmart18: default bgr to off
overlays: Add note to BCM2711 overlays
overlays: Add extra CMA sizes (up to 512M)
rpivid_h265: Fix width/height typo
overlays: Add parameters to adafruit18, sainsmart18
overlays: Regenerate upstream-pi4 overlay
minor typo in directions
overlays: Add option for composite to vc4-kms-v3d-pi4.
dt: Remove duplicate assignment for i2c0 pinctrl config
overlays: Update i2c0 overlay to disable the i2c0mux.
configs: Enable CHACHA20POLY1305=m
ARM: dts: Limit BT modem baud rate on 3B
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1908077/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
