This bug was fixed in the package linux-oem-5.13 - 5.13.0-1019.23 --------------- linux-oem-5.13 (5.13.0-1019.23) focal; urgency=medium
* focal/linux-oem-5.13: 5.13.0-1019.23 -proposed tracker (LP: #1949076) * Fail to detect audio output from external monitor (LP: #1948767) - ALSA: hda: intel: Allow repeatedly probing on codec configuration errors * Intel I225-IT ethernet controller: igc: probe of 0000:02:00.0 failed with error -1 (LP: #1945576) - igc: Remove _I_PHY_ID checking - igc: Remove phy->type checking * Fix Screen freeze after resume from suspend with iGPU [1002:6987] (LP: #1949050) - drm/amdgpu: reenable BACO support for 699F:C7 polaris12 SKU - drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend - drm/amdgpu: Fix crash on device remove/driver unload * Need support of Qualcomm WCN6856 (LP: #1939528) - Revert "UBUNTU: SAUCE: Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller" - Revert "UBUNTU: SAUCE: cfg80211: save power spectral density(psd) of regulatory rule" - Revert "UBUNTU: SAUCE: cfg80211: add definition for 6 GHz power spectral density(psd)" - Revert "UBUNTU: SAUCE: ath11k: set correct NL80211_FEATURE_DYNAMIC_SMPS for WCN6855" - Revert "mac80211: save transmit power envelope element and power constraint" - Revert "mac80211: add parse regulatory info in 6 GHz operation information" - Revert "ieee80211: add power type definition for 6 GHz" - Revert "mac80211: use ieee802_11_parse_elems() in ieee80211_prep_channel()" - Revert "mac80211: always allocate struct ieee802_11_elems" - Revert "mac80211: mlme: find auth challenge directly" - Revert "mac80211: move CRC into struct ieee802_11_elems" - Revert "mac80211: mesh: clean up rx_bcn_presp API" - Revert "ath11k: support SMPS configuration for 6 GHz" - Revert "ath11k: add 6 GHz params in peer assoc command" - Revert "ieee80211: Add new A-MPDU factor macro for HE 6 GHz peer caps" - Revert "ath11k: copy cap info of 6G band under WMI_HOST_WLAN_5G_CAP for WCN6855" - Revert "ath11k: enable 6G channels for WCN6855" - Revert "ath11k: re-enable ht_cap/vht_cap for 5G band for WCN6855" - Revert "ath11k: fix survey dump collection in 6 GHz" - Revert "ath11k: fix packet drops due to incorrect 6 GHz freq value in rx status" - Revert "ath11k: add channel 2 into 6 GHz channel list" - Revert "ath11k: qmi: avoid error messages when dma allocation fails" - Revert "mac80211: parse transmit power envelope element" - Revert "ieee80211: add definition for transmit power envelope element" - Revert "ieee80211: add definition of regulatory info in 6 GHz operation information" - Revert "mac80211: notify driver on mgd TX completion" - Revert "ath11k: don't call ath11k_pci_set_l1ss for WCN6855" - Revert "ath11k: add support for WCN6855" - Revert "ath11k: add support to get peer id for WCN6855" - Revert "ath11k: setup WBM_IDLE_LINK ring once again" - Revert "ath11k: setup REO for WCN6855" - Revert "ath11k: add dp support for WCN6855" - Revert "ath11k: add hw reg support for WCN6855" -- Timo Aaltonen <timo.aalto...@canonical.com> Thu, 28 Oct 2021 16:00:01 +0300 ** Changed in: linux-oem-5.13 (Ubuntu Focal) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.14 in Ubuntu. https://bugs.launchpad.net/bugs/1945576 Title: Intel I225-IT ethernet controller: igc: probe of 0000:02:00.0 failed with error -1 Status in HWE Next: New Status in linux package in Ubuntu: Fix Released Status in linux-intel package in Ubuntu: Invalid Status in linux-intel-5.13 package in Ubuntu: Invalid Status in linux-oem-5.10 package in Ubuntu: Invalid Status in linux-oem-5.13 package in Ubuntu: Invalid Status in linux-oem-5.14 package in Ubuntu: Invalid Status in linux source package in Focal: Won't Fix Status in linux-intel source package in Focal: Won't Fix Status in linux-intel-5.13 source package in Focal: Fix Released Status in linux-oem-5.10 source package in Focal: Fix Committed Status in linux-oem-5.13 source package in Focal: Fix Released Status in linux-oem-5.14 source package in Focal: Fix Committed Status in linux source package in Hirsute: Fix Committed Status in linux-intel source package in Hirsute: Invalid Status in linux-intel-5.13 source package in Hirsute: Invalid Status in linux-oem-5.10 source package in Hirsute: Invalid Status in linux-oem-5.13 source package in Hirsute: Invalid Status in linux-oem-5.14 source package in Hirsute: Invalid Status in linux source package in Impish: Fix Committed Status in linux-intel source package in Impish: Invalid Status in linux-intel-5.13 source package in Impish: Invalid Status in linux-oem-5.10 source package in Impish: Invalid Status in linux-oem-5.13 source package in Impish: Invalid Status in linux-oem-5.14 source package in Impish: Invalid Bug description: [Environment] Device : Aaeon Up xtreme i11 Platform: Intel TigerLake-UP3 I225-IT NVM version: 1.79 I225-IT Stepping: B3 Ubuntu version: 20.04.3 LTS with kernel 5.11.0-27-generic [Description] It can work under Windows10. But uner Ubuntu, we can't find the interface by ifconfig command and the system dmesg will has the error of igc driver module : igc: probe of 0000:02:00.0 failed with error -1 To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1945576/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp