This bug was fixed in the package linux-raspi - 5.19.0-1001.3
---------------
linux-raspi (5.19.0-1001.3) kinetic; urgency=medium
* kinetic/linux-raspi: 5.19.0-1001.3 -proposed tracker (LP: #1982325)
* Packaging resync (LP: #1786013)
- [Packaging] update Ubuntu.md
- debian/dkms-versions -- update from kernel-versions (main/master)
* Missing overlays/README (LP: #1954757)
- SAUCE: Install overlays/README
* dtoverlay=uart4 breaks Raspberry Pi 4B boot (LP: #1875454)
- SAUCE: arm: dts: Add 'brcm,bcm2835-pl011' compatible for uart2-5
* kinetic/linux-raspi: Update to upstream raspberrypi rpi-5.19.y (2022-07-19)
(LP: #1982090)
- arm64: setup: Fix build warning
- clk: Drop the rate range on clk_put()
- clk: Skip clamping when rounding if there's no boundaries
- clk: Introduce clk_get_rate_range()
- clk: Mention that .recalc_rate can return 0 on error
- clk: Clarify clk_get_rate() expectations
- clk: tests: Add test suites description
- clk: tests: Add reference to the orphan mux bug report
- clk: tests: Add tests for uncached clock
- clk: tests: Add tests for single parent mux
- clk: tests: Add tests for mux with multiple parents
- clk: tests: Add some tests for orphan with multiple parents
- clk: Take into account uncached clocks in clk_set_rate_range()
- clk: Fix clk_get_parent() documentation
- clk: Set req_rate on reparenting
- clk: Change clk_core_init_rate_req prototype
- clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to
its
caller
- clk: Introduce clk_hw_init_rate_request()
- clk: Add our request boundaries in clk_core_init_rate_req
- clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
- clk: Introduce clk_core_has_parent()
- clk: Stop forwarding clk_rate_requests to the parent
- clk: Zero the clk_rate_request structure
- clk: Test the clock pointer in clk_hw_get_name()
- clk: Introduce the clk_hw_get_rate_range function
- clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
- clk: tests: Add some tests for clk_get_rate_range()
- clk: tests: Add missing test case for ranges
- drm/vc4: Adopt the dma configuration from the HVS or V3D component
- Support RPi DPI interface in mode6 for 18-bit color
- drm/vc4: Add FKMS as an acceptable node for dma ranges.
- drm/vc4: A present but empty dmas disables audio
- drm/vc4: Add debugfs node that dumps the current display lists
- drm/vc4: Add all the HDMI registers into the debugfs dumps
- drm/vc4: Add the 2711 HVS as a suitable DMA node
- vc4_hdmi: Report that 3d/stereo is allowed
- vc4: Clear unused infoframe packet RAM registers
- drm/vc4: Change the default DPI format to being 18bpp, not 24.
- vc4/drm: Avoid full hdmi audio fifo writes
- vc4/drm: vc4_plane: Remove subpixel positioning check
- drm/vc4: Correct pixel order for DSI0
- drm/vc4: Register dsi0 as the correct vc4 encoder type
- drm/vc4: Fix dsi0 interrupt support.
- drm/vc4: Add correct stop condition to vc4_dsi_encoder_disable iteration
- drm/atomic: Don't fixup modes that haven't been reset
- drm/vc4: Fix timings for interlaced modes
- drm/vc4: Fix margin calculations for the right/bottom edges
- drm/vc4: Fix timings for VEC modes
- drm/vc4: Refactor VEC TV mode setting
- drm/vc4: Fix definition of PAL-M mode
- drm/vc4: Add support for more analog TV standards
- drm/vc4: Allow setting the TV norm via module parameter
- drm/vc4: Refactor mode checking logic
- raspberrypi-firmware: Update mailbox commands
- drm/vc4: Add firmware-kms mode
- drm/vc4: Reset HDMI MISC_CONTROL register.
- drm/vc4: Release workaround buffer and DMA in error paths and unbind
- drm/vc4: Correct DSI divider calculations
- drm/vc4: Add support for gamma on BCM2711
- drm/vc4: Add debugfs node that dumps the vc5 gamma PWL entries
- drm/vc4: hvs: Force modeset on gamma lut change
- drm/vc4: Relax VEC modeline requirements and add progressive mode support
- drm/vc4: Make VEC progressive modes readily accessible
- drm: Check whether the gamma lut has changed before updating
- drm/vc4: Enable gamma block only when required.
- drm/vc4: Only add gamma properties once.
- drm/vc4: Validate the size of the gamma_lut
- drm/vc4: Add support for composite syncs to vc4_dpi
- drm/vc4: Move HDMI reset to pm_resume
- drm/vc4: dpi: Add option for inverting pixel clock and output enable
- drm/vc4: dpi: Ensure a default format is selected
- vc4/drm: Ignore vc4_hdmi->output_enabled for allowing audio (#4759)
- drm/vc4: Skip writes to disabled packet RAM
- drm/vc4: Add alpha_blend_mode property to each plane.
- drm/vc4: Disable Gamma control on HVS5 due to issues writing the table
- drm/vc4_hdmi: Add Broadcast RGB property to allow override of RGB range
- drm/vc4: Add DRM 210101010 RGB formats for hvs5.
- media: uapi: add MEDIA_BUS_FMT_RGB565_1X24_CPADHI
- drm/vc4: dpi: Support DPI interface in mode3 for RGB565
- drm/panel: Add and initialise an orientation field to drm_panel
- drm/vc4: For DPI, MEDIA_BUS_FMT_RGB565_1X16 is mode 1, not 3.
- drm/dsi: Document the meaning and spec references for MIPI_DSI_MODE_*
- drm/bridge: tc358762: Ignore EPROBE_DEFER when logging errors
- drm/vc4: Rename bridge to out_bridge
- drm/vc4: Move DSI initialisation to encoder_mode_set.
- drm/vc4: Remove splitting the bridge chain from the driver.
- drm/vc4: Convert vc4_dsi to use atomic enable/disable/mode_set.
- drm/vc4: Convert vc4_dsi to using a bridge instead of encoder.
- drm/vc4: Remove entry to ULPS from vc4_dsi post_disable
- drm/bridge: Introduce pre_enable_upstream_first to alter bridge init order
- drm/panel: Add prepare_upstream_first flag to drm_panel
- drm: Include drm_connector.h from drm_panel.h
- drm/tc358762: Set the pre_enable_upstream_first flag to configure DSI host
- drm/vc4: Support zpos on all planes
- drm/vc4: hdmi: Add CSC for BT601/709/2020 limited and full range output
- vc4/drm: vc4_plane: Keep fractional source coords inside state
- vc4/drm: Handle fractional coordinates using the phase field
- drm: Add chroma siting properties
- vc4/drm:plane: Make use of chroma siting parameter
- drm/vc4: Force trigger of dlist update on margins change
- drm/atomic-helpers: remove legacy_cursor_update hacks
- drm/edid: Don't clear YUV422 if using deep color
- drm/vc4_hdmi: Force modeset when bpc changes
- drm/vc4: hdmi: Rework hdmi_enable_4kp60 detection
- drm/vc4: kms: Warn if clk_set_min_rate fails
- drm/vc4: Make sure we don't end up with a core clock too high
- drm/vc4: kms: Use maximum FIFO load for the HVS clock rate
- vc4_hdmi: Remove VC4_HDMI_SCHEDULER_CONTROL_VERT_ALWAYS_KEEPOUT
- drm/vc4_kms: Protect hvs dereference on fkms
- drm/vc4: hdmi: Fix no video output on DVI monitors
- drm/vc4_hdmi: Force a modeset when Broadcast RGB setting changes
- drm/atomic: If margins are updated, update all planes.
- drm/vc4: Add HDMI format detection registers to register list
- drm/vc4: Add MISC_CONTROL register for vc4.
- drm/vc4: Correct HDMI timing registers for interlaced modes
- drm/vc4: Move pixel doubling from Pixelvalve to HDMI block
- kms/vc4_hdmi: Refuse 4096x2160@60 hdmi modes
- BCM2708: Add core Device Tree support
- config: Add default configs
- clk-raspberrypi: Support VEC clock
- clk-raspberrypi: Add HEVC to exported clocks
- clk-raspberrypi: Add ISP to exported clocks
- Register the clocks early during the boot process, so that
special/critical
clocks can get enabled early on in the boot process avoiding the risk of
disabling a clock, pll_divider or pll when a claiming driver fails to
install propperly - maybe it needs to defer.
- clk-bcm2835: Mark used PLLs and dividers CRITICAL
- clk-bcm2835: Add claim-clocks property
- clk-bcm2835: Read max core clock from firmware
- clk: clk-bcm2835: Use %zd when printing size_t
- clk-bcm2835: Don't wait for pllh lock
- clk: bcm2835: Add support for setting leaf clock rates while running.
- clk: bcm2835: Allow reparenting leaf clocks while they're running.
- clk-bcm2835: Avoid null pointer exception
- clk-bcm2835: Disable v3d clock
- clk: bcm2835: Pass DT node to rpi_firmware_get
- clk-bcm2835: Remove VEC clock support
- arm: partially revert 702b94bff3c50542a6e4ab9a4f4cef093262fe65
- cache: export clean and invalidate
- Revert "spi: spidev: Fix CS polarity if GPIO descriptors are used"
- Revert "Bluetooth: Always request for user confirmation for Just Works (LE
SC)"
- Revert "Bluetooth: Always request for user confirmation for Just Works"
- smsx95xx: fix crimes against truesize
- smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default
- Allow mac address to be set in smsc95xx
- cgroup: Disable cgroup "memory" by default
- Protect __release_resource against resources without parents
- irq-bcm2836: Avoid "Invalid trigger warning"
- irqchip: bcm2835: Add FIQ support
- irqchip: irq-bcm2835: Add 2836 FIQ support
- spi: spidev: Completely disable the spidev warning
- dmaengine: bcm2835: Load driver early and support legacy API
- rtc: Add SPI alias for pcf2123 driver
- watchdog: bcm2835: Support setting reboot partition
- reboot: Use power off rather than busy spinning when halt is requested
- bcm: Make RASPBERRYPI_POWER depend on PM
- bcm2835-rng: Avoid initialising if already enabled
- sound: Demote deferral errors to INFO level
- Update vfpmodule.c
- i2c: bcm2835: Add debug support
- irqchip: irq-bcm2836: Remove regmap and syscon use
- lan78xx: Enable LEDs and auto-negotiation
- amba_pl011: Don't use DT aliases for numbering
- amba_pl011: Round input clock up
- amba_pl011: Insert mb() for correct FIFO handling
- amba_pl011: Add cts-event-workaround DT property
- tty: amba-pl011: Avoid rare write-when-full error
- pinctrl-bcm2835: Set base to 0 give expected gpio numbering
- Main bcm2708/bcm2709 linux port
- bcm2708 framebuffer driver
- Pulled in the multi frame buffer support from the Pi3 repo
- fbdev: add FBIOCOPYAREA ioctl
- dmaengine: Add support for BCM2708
- MMC: added alternative MMC driver
- Adding bcm2835-sdhost driver, and an overlay to enable it
- vc_mem: Add vc_mem driver for querying firmware memory addresses
- Add /dev/gpiomem device for rootless user GPIO access
- Add SMI driver
- Add Chris Boot's i2c driver
- char: broadcom: Add vcio module
- firmware: bcm2835: Support ARCH_BCM270x
- leds: Add the "input" trigger, for pwr_led
- Added Device IDs for August DVB-T 205
- Improve __copy_to_user and __copy_from_user performance
- gpio-poweroff: Allow it to work on Raspberry Pi
- mfd: Add Raspberry Pi Sense HAT core driver
- Add support for all the downstream rpi sound card drivers
- rpi_display: add backlight driver and overlay
- bcm2835-virtgpio: Virtual GPIO driver
- OF: DT-Overlay configfs interface
- brcm: adds support for BCM43341 wifi
- hci_h5: Don't send conf_req when ACTIVE
- ARM64: Round-Robin dispatch IRQs between CPUs.
- ARM64: Force hardware emulation of deprecated instructions.
- AXI performance monitor driver (#2222)
- ARM: bcm2835: Set Serial number and Revision
- dwc-otg: FIQ: Fix "bad mode in data abort handler"
- ARM: Activate FIQs to avoid __irq_startup warnings
- i2c-gpio: Also set bus numbers from reg property
- added capture_clear option to pps-gpio via dtoverlay (#2433)
- lan78xx: Read initial EEE status from DT
- hid: Reduce default mouse polling interval to 60Hz
- Add ability to export gpio used by gpio-poweroff
- firmware/raspberrypi: Notify firmware of a reboot
- irqchip: irq-bcm2835: Calc. FIQ_START at boot-time
- net: lan78xx: Disable TCP Segmentation Offload (TSO)
- brcmfmac: Re-enable firmware roaming support
- lan78xx: Move enabling of EEE into PHY init code
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
MEDIA_SUBDRV_AUTOSELECT
- firmware: raspberrypi: Add backward compatible get_throttled
- sc16is7xx: Don't spin if no data received
- drivers: thermal: step_wise: add support for hysteresis
- drivers: thermal: step_wise: avoid throttling at hysteresis temperature
after dropping below it
- Update issue templates (#2736)
- net: lan78xx: Support auto-downshift to 100Mb/s
- firmware: raspberrypi: Report the fw variant during probe
- lan78xx: Debounce link events to minimize poll storm
- lan78xx: EEE support is now a PHY property
- bcm2835-dma: Add support for per-channel flags
- rtc: rv3028: Add backup switchover mode support
- media: tc358743: Increase FIFO level to 374.
- media: tc358743: Add support for 972Mbit/s link freq.
- media: tc358743: Check I2C succeeded during probe.
- media: adv7180: Default to the first valid input
- media: adv7180: Add YPrPb support for ADV7282M
- media: videodev2: Add helper defines for printing FOURCCs
- dt-bindings: Document BCM283x CSI2/CCP2 receiver
- MAINTAINERS: Add entry for BCM2835 Unicam driver
- media: tc358743: Return an appropriate colorspace from tc358743_set_fmt
- staging: mmal-vchiq: Avoid use of bool in structures
- staging: mmal-vchiq: Add support for event callbacks.
- staging: vc04_services: Support sending data to MMAL ports
- media: videobuf2: Allow exporting of a struct dmabuf
- staging: mmal-vchiq: Fix client_component for 64 bit kernel
- staging: mmal_vchiq: Add in the Bayer encoding formats
- staging: mmal-vchiq: Update mmal_parameters.h with recently defined params
- staging: mmal-vchiq: Free the event context for control ports
- staging: mmal-vchiq: Fix memory leak in error path
- w1: w1-gpio: Make GPIO an output for strong pullup
- arm: bcm2835: Fix FIQ early ioremap
- arm: bcm2835: DMA can only address 1GB
- hwrng: iproc-rng200: Add BCM2838 support
- bcmgenet: constrain max DMA burst length
- bcmgenet: Better coalescing parameter defaults
- net: genet: enable link energy detect powerdown for external PHYs
- spi: bcm2835: enable shared interrupt support
- soc: bcm: bcm2835-pm: Add support for 2711.
- usb: add plumbing for updating interrupt endpoint interval state
- xhci: implement xhci_fixup_endpoint for interval adjustments
- usbhid: call usb_fixup_endpoint after mangling intervals
- arm: bcm2835: Add bcm2838 compatible string.
- i2c: bcm2835: Set clock-stretch timeout to 35ms
- drm/v3d: Clock V3D down when not in use.
- drivers: char: add chardev for mmap'ing the RPiVid control registers
- hid: usb: Add device quirks for Freeway Airmouse T3 and MX3
- net: bcmgenet: Workaround #2 for Pi4 Ethernet fail
- xhci: Use more event ring segment table entries
- configs: arm64/bcm2711: Enable V3D
- arch/arm: Add model string to cpuinfo
- arch/arm64: Add Revision, Serial, Model to cpuinfo
- media: dt-bindings: Add binding for the Sony IMX219 sensor
- v4l2: Add a Greyworld AWB mode.
- staging: bcm2835-camera: Add greyworld AWB mode
- media: v4l2: Add Greyworld AWB control name
- staging:bcm2835-camera: Fix the cherry-pick of AWB Greyworld
- ARM: bcm: Switch board, clk and pinctrl to bcm2711 compatible
- dt-bindings: Add binding for the Infineon IRS1125 sensor
- media: i2c: Add a driver for the Infineon IRS1125 depth sensor
- drm/v3d: Suppress all but the first MMU error
- drm/v3d: Plug dma_fence leak
- staging: vchiq_arm: Register vcsm-cma as a platform driver
- staging: vchiq_arm: Register bcm2835-codec as a platform driver
- net:phy:2711 Allow ethernet LED mode to be set via device tree
- v3d_drv: Handle missing clock more gracefully
- v3d_gem: Kick the clock so firmware knows we are using firmware clock
interface
- clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks
- staging: vchiq_arm: Set up dma ranges on child devices
- staging: vchiq: Use the old dma controller for OF config on platform
devices
- ARM: bcm: Backport BCM2711 support from upstream
- Initialise rpi-firmware before clk-bcm2835
- staging: vchiq_arm: Give vchiq children DT nodes
- pinctrl: bcm2835: Remove gpiochip on error
- video: fbdev: bcm2708_fb: Use common compat header
- of: overlay: Correct symbol path fixups
- dt-bindings: pci: Add DT docs for Brcmstb PCIe device
- bcmgenet: Disable skip_umac_reset by default
- media: videodev2.h: Add a format for column YUV4:2:0 modes
- media: dt-bindings: media: Add binding for the Raspberry PI HEVC decoder
- RFC: media: Add media_request_{pin,unpin} API
- staging: media: Add Raspberry Pi V4L2 H265 decoder
- driver: char: rpivid: Remove legacy name support
- spi: Force CS_HIGH if GPIO descriptors are used
- driver: char: rpivid: Don't map more than wanted
- media: uapi: v4l2-core: Add sensor ancillary data V4L2 foucc type.
- media: uapi: Add MEDIA_BUS_FMT_SENSOR_DATA media bus format
- media: uapi: v4l2-core: Add ISP statistics output V4L2 fourcc type
- media: uapi: v4l-ctrls: Add CID base for the bcm2835-isp driver
- staging: vchiq: Load bcm2835_isp driver from vchiq
- bcm2835-dma: Add proper 40-bit DMA support
- media: i2c: tc358743: Fix fallthrough warning
- video: bcm2708_fb: Disable FB if no displays found
- dt-bindings: media: i2c: Add IMX477 CMOS sensor binding
- staging: vc04_services: mmal-vchiq: Update parameters list
- staging:vc04_services: bcm2835-camera: Request headers with I-frame
- zswap: Defer zswap initialisation
- gpiolib: Don't prevent IRQ usage of output GPIOs
- PCI: brcmstb: Add DT property to control L1SS
- media: irs1125: Using i2c_transfer for ic2 reads
- media: irs1125: Refactoring and debug messages
- media: irs1125: Atomic access to imager reconfiguration
- media: irs1125: Keep HW in sync after imager reset
- brcmfmac: Prefer a ccode from OTP over nvram file
- media: bcm2835-unicam: Driver for CCP2/CSI2 camera interface
- media: bcm2835-unicam: Kconfig/Makefile for CCP2/CSI2 camera interface
- media: bcm2835-unicam: Add support for get_mbus_config to set num lanes
- media: bcm2835-unicam: Avoid gcc warning over {0} on endpoint
- media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called
- media: i2c: imx290: Add support for 74.25MHz clock
- media: i2c: imx290: Correct range for V4L2_CID_GAIN to 0-238
- media: i2c: imx290: Convert HMAX setting into V4L2_CID_HBLANK
- media: i2c: imx290: Add support for V4L2_CID_VBLANK
- media: i2c: imx290: Add exposure control to the driver.
- media: i2c: imx290: Add H and V flip controls
- media: dt-bindings: media: i2c: Add mono version to IMX290 bindings
- media : i2c: imx290: Add support for the mono sensor variant.
- media: i2c: imx290: Switch set_hmax to use imx290_write_buffered_reg
- serial: 8250: bcm2835aux - defer if clock is zero
- media: Add a pixel format for MIPI packed 12bit luma only.
- media: Add a pixel format for MIPI packed 14bit luma only.
- media: bcm2835-unicam: Add support for 12bit mono packed format
- media: bcm2835-unicam: Add support for 14bit mono sources
- media: bcm2835-unicam: Add support for unpacked 14bit Bayer formats
- bcm2835-dma: Add NO_WAIT_RESP flag
- media: i2c: imx290: Explicitly set v&h blank on mode change
- media: i2c: imx290: Add support for g_selection to report cropping
- media: i2c: imx290: Set the colorspace fields in the format
- media: bcm2835-unicam: Reinstate V4L2_CAP_READWRITE in the caps
- media: bcm2835-unicam: Ensure type is VIDEO_CAPTURE in [g|s]_selection
- media: bcm2835: unicam: Set VPU min clock freq to 250Mhz.
- dt-bindings: bcm2835-unicam: Update documentation with new clock params
- leds: Add the actpwr trigger
- bcm2835-dma: Advertise the full DMA range
- media: bcm2835-unicam: Drop WARN on uing direct cache alias
- media: i2c: tc358743: Only allow supported pixel fmts in set_fmt
- media: i2c: Add driver for Sony IMX477 sensor
- media: i2c: imx477: Add support for adaptive frame control
- media: i2c: imx477: Return correct result on sensor id verification
- media: i2c: imx477: Parse and register properties
- media: bcm2835-unicam: Always service interrupts
- media: bcm2835: unicam: Fix uninitialized warning
- media: bcm2835-unicam: Fixup review comments from Hans.
- media: bcm2835-unicam: Retain packing information on G_FMT
- media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1
- staging/fbtft: Add support for display variants
- brcmfmac: Increase power saving delay to 2s
- net: bcmgenet: Reset RBUF on first open
- char: Add broadcom char drivers back to build files
- staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32
- staging: vc04_services: Add new vc-sm-cma driver
- staging: vchiq-mmal: Add support for 14bit Bayer
- staging: mmal-vchiq: Add monochrome image formats
- staging: mmal-vchiq: Use vc-sm-cma to support zero copy
- staging: vc04_services: Add a V4L2 M2M codec driver
- bcm2835-dma: only reserve channel 0 if legacy dma driver is enabled
- uapi: bcm2835-isp: Add bcm2835-isp uapi header file
- staging: vc04_services: ISP: Add a more complex ISP processing component
- gpio: Add gpio-fsm driver
- rpisense-fb: Set pseudo_pallete to prevent crash on fbcon takeover
- bcm2708_fb: Fix a build warning
- watchdog: bcm2835: Ignore params after the partition number
- firmware: raspberrypi: Add support for tryonce reboot flag
- phy: broadcom: split out the BCM54213PE from the BCM54210E IDs
- phy: broadcom: Add bcm54213pe configuration
- PCI: brcmstb: Restore initial fundamental reset
- Input: edt-ft5x06: Poll the device if no interrupt is configured.
- drm/panel/raspberrypi-touchscreen: Use independent I2C actions with delay.
- drm/panel/raspberrypi-ts: Insert delay before polling for startup state
- dt-bindings: Add compatible for BCM2711 DSI1
- media: bcm2835-unicam: Correctly handle error propagation for stream on
- media: bcm2835-unicam: Return early from stop_streaming() if stopped
- media: bcm2835-unicam: Clear clock state when stopping streaming
- PCI: brcmstb: Advertise MSI-X support
- net: lan78xx: Ack pending PHY ints when resetting
- media: i2c: imx477: Selection compliance fixes
- vc-sm-cma: fixed kbuild problem
- staging/vc04_services: Add additional unpacked raw formats
- staging/bcm2835-codec: Add the unpacked (16bpp) raw formats
- staging/bcm2835-codec: Log the number of excess supported formats
- staging/bcm2835-isp: Add the unpacked (16bpp) raw formats
- staging/bcm2835-isp: Log the number of excess supported formats
- bcm2835-dma: Avoid losing CS flags after interrupt
- bcm2835-dma: Add bcm2835-dma: Add DMA_WIDE_SOURCE and DMA_WIDE_DEST flags
- uapi: bcm2835-isp: Add colour denoise configuration
- staging: vc04_services: ISP: Add colour denoise control
- spi: bcm2835: Workaround/fix for zero-length transfers
- kbuild: Silence unavoidable dtc overlay warnings
- media: i2c: imx290: Replace V4L2_CID_GAIN with V4L2_CID_ANALOGUE_GAIN
- media: i2c: imx290: Fix number of controls in v4l2_ctrl_handler_init
- dt-binding: display: bcm2711-hdmi: Add CEC and hotplug interrupts
- bcm2835-isp: Allow formats with different colour spaces.
- media: i2c: imx477: Remove auto frame length adjusting
- media: i2c: imx477: Add very long exposure control to the driver
- media: i2c: imx290: Fix up exposure calcuations and ranges
- media: i2c: imx290: Handle exposure correctly when vblank changes
- media: i2c: imx477: Fix crop height for 2028x1080 mode
- media: i2c: imx477: Replace existing 1012x760 mode
- media: i2c: imx477: Remove internal v4l2_mbus_framefmt from the state
- media: i2c: imx477: Remove unused function parameter
- media: bcm2835-unicam: Fix bug in buffer swapping logic
- Assign crypto aliases to different AES implementation modules
- media/v4l2_m2m: In buffered mode run jobs if either port is streaming
- staging/bcm2835-codec: Add support for pixel aspect ratio
- staging/bcm2835-codec: Implement additional g_selection calls for decode
- staging/bcm2835-codec: Add VC-1 support.
- media: i2c: add ov9281 driver.
- media: ov5647: Fix return codes from ov5647_write/ov5647_read functions.
- media: i2c: ov5647: Parse and register properties
- staging/bcm2835-camera: Add support for DMABUFs
- staging: fbtft: Add minipitft13 variant
- drm/panel: jdi-lt070me05000: Use gpiod_set_value_cansleep
- staging/bcm2835-codec: Fix support for levels 4.1 and 4.2
- staging/bcm2835-codec: Set the colourspace appropriately for RGB formats
- staging/bcm2835-codec: Pass corrupt frame flag.
- staging/bcm2835-camera: Add support for H264 levels 4.1 and 4.2
- staging/bcm2835-codec: Do not update crop from S_FMT after res change
- staging/bcm2835-isp: Fix compiler warning
- gpio-poweroff: Remember the old poweroff handler
- media: i2c: ov5647: Correct pixel array offset
- media: i2c: ov5647: Correct minimum VBLANK value
- media: i2c: ov5647: Fix v4l2-compliance failure subscribing to events
- bcm2835: Allow compressed frames to set sizeimage (#4386)
- media: i2c: imx477: Fix for long exposure limit calculations
- media: i2c: imx290: Support 60fps in 2 lane operation
- media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s
- media: i2c: imx290: Fix clock setup register assignments
- staging: vc04_services: isp: Set the YUV420/YVU420 format stride to 64
bytes
- Documentation: devicetree: Add documentation for imx378 sensor
- media: i2c: imx477: Extend driver to support imx378 sensor
- media: bcm2835-unicam: Forward input status from subdevice
- media: i2c: imx477: Fix framerates for 1332x990 mode
- media: i2c: imx290: Add fwnode properties controls
- media: i2c: ov7251: Add fwnode properties controls
- usb: xhci: workaround for bogus SET_DEQ_PENDING endpoint state
- media: i2c: imx477: Allow control of on-sensor DPC
- sound/usb: add device quirks for A4Tech FHD 1080p webcams
- sound/usb: call usb_autopm_get_interface() for devices that should not
- brcmfmac: Try product-specific clm_blob names first
- staging: vchiq_arm: Add 36-bit address support
- staging: vchiq_arm: children inherit DMA config
- staging: vchiq_arm: Usa a DMA pool for small bulks
- drm/panel/raspberrypi-touchscreen: Handle I2C errors.
- drm/panel-simple: Add a timing for the Raspberry Pi 7" panel
- Input: edt-ft54x6: Clean up timer and workqueue on remove
- staging/bcm2835-codec: Change the default codec res to 32x32
- staging/vchiq-mmal: Add buffer flags for interlaced video
- staging/vchiq-mmal: Add parameters for interlaced video support
- staging/bcm2835-codec: Add support for decoding interlaced streams
- staging/bcm2835-codec: Correct ENUM_FRAMESIZES stepsize to 2
- staging/bcm2835-codec: Return buffers to QUEUED not ERROR state
- staging/bcm2835_codec: Log MMAL flags in hex
- staging: bcm2835-codec: Allow custom specified strides/bytesperline.
- staging/vchiq-mmal: Add the deinterlace image effects enums
- staging/bcm2835_codec: Add support for image_fx to deinterlace
- staging/bcm2835-v4l2_codec: Fix for encode selection API
- Add Raspberry Pi PoE+ HAT support
- staging: bcm2835-codec: Allow decode res changed before STREAMON(CAPTURE)
- staging/bcm2835-codec: Do not send buffers to the VPU unless streaming
- staging/mmal-vchiq: Rationalise included headers
- staging: bcm2835-codec: Format changed should trigger drain
- staging: bcm2835-codec: Signal the firmware to stop on all changes
- staging/mmal-vchiq: Add module parameter to enable logging.
- staging: bcm2835-codec: Queue flushed buffers instead of completing
- staging: mmal-vchiq: Reset buffers_with_vpu on port_enable
- staging: bcm2835_codec: Correct flushing code for refcounting
- staging: bcm2835-codec: Ensure all ctrls are set on streamon
- staging: bcm2835-codec: Add support for H&V Flips to ISP
- bcm2835_smi_dev: Fix handling of word-odd lengths
- dt-bindings: media: i2c: Add IMX519 CMOS sensor binding
- media: i2c: Add driver for IMX519 sensor
- media: i2c: imx519: Advertise embedded data node on media pad 1
- drivers/gpio: Add a driver that wraps the PWM API as a GPIO controller
- media: i2c: imx219: Sensor should report RAW color space
- media: i2c: imx290: Sensor should report RAW color space
- media: i2c: imx477: Sensor should report RAW color space
- media: i2c: imx519: Sensor should report RAW color space
- media: i2c: ov5647: Sensor should report RAW color space
- vc04_services: isp: Report input node as wanting full range RAW color
space
- media/bcm2835-unicam: Parse pad numbers correctly
- media/bcm2835-unicam: Add support for configuration via MC API
- staging/bcm2835-camera: Add support for H264_MIN_QP, H264_MAX_QP
- staging/bcm2835-camera: Add support for MPEG_VIDEO_FORCE_KEY_FRAME
- media: i2c: imx477: Add vsync trigger_mode parameter
- bcm2835-v4l2-codec: Remove advertised support of VP8
- brcmfmac: Don't promote INFO logging to ERR
- brcmfmac: Read alternative firmware names from DT
- brcmfmac: Protect against reprobing
- media: i2c: ov5647: Support HFLIP and VFLIP
- drivers: bcm2835_isp: Allow multiple users for the ISP driver.
- drivers: bcm2835_isp: Fix div by 0 bug.
- Pass V4L2_CID_MPEG_VIDEO_H264_MIN_QP/MAX_QP to bcm2835-v4l2-codec
- spi: spidev: Restore loading from Device Tree
- drm/v3d: Allow -EACCES return from pm_runtime_get*
- media: rpivid: remove min_buffers_needed from src queue
- input: edt-ft5x06: Handle unreliable TOUCH_UP events
- staging/bcm2835-codec: bytesperline for YUV420/YVU420 needs to be 64
- staging/bcm2835-codec: Allow a different stride alignment per role
- drivers: bcm2835_unicam: Add logging message when a frame is dropped.
- regulator/rpi-panel-attiny: Don't read the LCD power status
- input: edt-ft5x06: Only look at the number of points reported
- rtc: pcf8523: Fix oscillator stop bit handling
- drm/panel-simple: Populate bpc when using panel-dpi
- drm/panel-simple: Allow the bus format to be read from DT for panel-dpi
- xhci: quirks: add link TRB quirk for VL805
- xhci: correct room_on_ring() for cases where there is a single segment
- media: imx219: Advertise embedded data node on media pad 1
- xhci: refactor out TRBS_PER_SEGMENT define in runtime code
- usb: xhci: add VLI_TRB_CACHE_BUG quirk
- media: i2c: ov5647: Add support for regulator control.
- media: i2c: ov7251: Make the enable GPIO optional.
- ASoC:ma120x0p: Increase maximum sample rate to 192KHz
- staging/bcm2835-isp: Fix cleanup after init fail
- uapi/v4l2-controls: Reset V4L2_CID_USER_BCM2835_ISP_BASE to same as 5.10
- media: i2c: ov9281: Increase diff between VTS and max exposure
- Use GitHubs issue form for bug reports
- bcm2835-v4l2-isp: Add missing lock initialization
- mfd: simple-mfd-i2c: Add configuration for RPi POE HAT
- pwm: raspberrypi-poe: Add option of being created by MFD or FW
- power: rpi-poe: Drop CURRENT_AVG as it is not hardware averaged
- power: rpi-poe: Add option of being created by MFD or FW
- drivers: bcm2835_unicam: Disable trigger mode operation
- Extending ili9881c driver support for nwe080 panel
- media: i2c: imx219: Correct the minimum vblanking value
- misc: bcm2835_smi: Use proper enum types for dma_{,un}map_single()
- ASoC: ma120x0p: Remove unnecessary const specifier
- ASoC: bcm: allo-piano-dac-plus: Remove unnecessary const specifiers
- media: bcm2835-unicam: Set ret on error path in unicam_async_complete()
- media: i2c: ov9281: Initialize id_msb to zero in ov9281_check_sensor_id()
- i2c: bcm2835: Make clock-stretch timeout configurable
- Patching lan78xx for SOF_TIMESTAMPING_TX_SOFTWARE support
- media: uapi: Document format MEDIA_BUS_FMT_RGB565_1X24_CPADHI
- dt-bindings: vendor-prefixes: Add Geekworm
- dt-bindings: display: simple: add Geekworm MZP280 Panel
- drm/panel: simple: add Geekworm MZP280 Panel
- drm/panel: simple: Remove custom handling of orientation
- drm/panel: Add panel driver for Ilitek ILI9806E panel
- drm/panel: Add panel driver for TDO Y17B based panels
- drm/panel/panel-sitronix-st7701: Support SPI config and RGB data
- bindings: Add sck-idle-input to spi-gpio
- spi: gpio: Add sck-idle-input property
- media: bcm2835-unicam: Handle a repeated frame start with no end
- media: i2c: imx219: Scale the pixel clock rate for the 640x480 mode
- usb: xhci: add a quirk for Superspeed bulk OUT transfers on VL805
- media: i2c: ov7251: Reinstate setting ov7251_global_init_setting
- usb: xhci: rework XHCI_VLI_SS_BULK_OUT_BUG quirk
- media/i2c: Add driver for Omnivision OV2311
- staging: vc04_services: isp: Permit all sRGB colour spaces on ISP outputs
- drivers: staging: bcm2835-isp: Do not cleanup mmal vcsm buffer on
stop_streaming
- Revert "net: bcmgenet: Request APD, DLL disable and IDDQ-SR"
- staging: vc04_services: codec: Add support for V4L2_PIX_FMT_RGBA32 format
- bcm2835-codec: /dev/video31 as interface to image_encode JPEG encoder
- dt-bindings: media: i2c: Add binding for ad5398 VCM
- media: i2c: Add driver for AD5398 VCM lens driver
- media: i2c: ov5647: Use v4l2_async_register_subdev_sensor for lens binding
- media: i2c: Rename ad5398 to ad5398_vcm
- drivers: staging: bcm2835-isp: Clear LS table handle in the firmware
- audioinjector.net: stereo and zero, use dev_err_probe, report success
- bcm2835-codec: Return empty buffers to the VPU instead of queueing to
vbuf2
- mm,page_alloc,cma: introduce a customisable threshold for allocating pages
in cma
- pinctrl: bcm2835: Only return non-GPIOs to inputs
- drm/panel: ilitek-ili9881c: Clean up on mipi_dsi_attach failure
- drm/panel: panel-ilitek9881c: Add prepare_upstream_first flag
- drm/v3d: Add support for 2711.
- drm/v3d: Hook up the runtime PM ops.
- drm/v3d: HACK: gut runtime pm for now.
- media: i2c: imx258: Remove unused defines
- media: i2c: imx258: Make image geometry meet sensor requirements
- media: i2c: imx258: Disable digital cropping on binned modes
- media: i2c: imx258: Implement HFLIP and VFLIP controls.
- media: i2c: imx258: Remove redundant I2C writes.
- media: i2c: imx258: Add regulator control
- media: i2c: imx258: Make V4L2_CID_VBLANK configurable.
- media: i2c: imx258: Register the ctrls from fwnode properties
- media: i2c: imx258: Add support for 24MHz clock
- media: i2c: imx258: Add support for running on 2 CSI data lanes
- media: i2c: imx258: Follow normal V4L2 behaviours for clipping exposure
- media: i2c: imx258: Add get_selection for pixel array information
- media: i2c: imx258: Allow configuration of clock lane behaviour
- media: i2c: imx258: Correct max FRM_LENGTH_LINES value
- media: i2c: imx258: Add support for long exposure modes
- media: i2c: imx258: Issue reset before starting streaming
- media: i2c: imx258: Set pixel_rate range to the same as the value
- media: i2c: imx258: Support faster pixel rate on binned modes
- clk: tests: Add tests for single parent mux
- rpivid: Use clk_get_max_rate()
- clk-bcm2835: use subsys_initcall for the clock driver when IMA is enabled
- tpm_tis_spi_main: Force probe routine to run synchronously with driver and
device registration when IMA is enabled
- staging: vchiq_arm: Add log_level module params
- dt-bindings: vendor-prefixes: Add Arducam
- media: dt-bindings: media: i2c: Add Arducam Pivariety Series CMOS sensor
binding
- media: i2c: Add driver of Arducam Pivariety series camera
- thermal: broadcom: Use dev_err_probe to suppress defer errors
- dt-bindings: hwmon: add microchip,emc2305.yaml dt binding description.
- dtbindings: Fixup microchip,emc2305.yaml bindings
- hwmon: (emc2305) add support for EMC2301/2/3/5 RPM-based PWM Fan Speed
Controller.
- hwmon: emc2305: fixups for driver submitted to mailing lists
- docs: hwmon: add emc2305.rst to docs
- media: i2c: Update imx519 Kconfig entry
- media: i2c: Update ov2311 Kconfig entry
- media: i2c: Update imx477 Kconfig entry
- media: i2c: Update ov9281 Kconfig entry
- media: i2c: Update irs1125 Kconfig entry
- media: i2c: arducam-pivariety: Fixup for mainline API changes
- mmc: block: Don't do single-sector reads during recovery
- vc04_services: vchiq-mmal: Add defines for mmal_es_format flags
- vc04_services: bcm2835-codec: Add support for V4L2_PIX_FMT_NV12_COL128
- dt-bindings: media: i2c: Add IMX296 CMOS sensor binding
- media: i2c: IMX296 camera sensor driver
- media: imx296: Fix Bayer order
- media: imx296: Add standby and stream on/off delays
- media: imx296: Only advertise the full resolution mode
- media: imx296: Add horizontal and vertical flips support
- media: imx296: Adjust exposure limits on vblank changes
- media: imx296: Set gain delay to 1 frame
- media: imx296: Add the link frequency control
- media: i2c: imx477: Correct minimum exposure lines
- vc04_services: squash: move to s32fract
- random: do not use jump labels before they are initialized
- drm/vc4: hvs: Ignore atomic_flush if we're disabled
- drm/v3d: Switch clock setting to new api
- clk-raspberrypi: Enable minimize for all firmware clocks
- ARM: dts: Add bcm2709-rpi-cm2.dts
- spi: bcm2835: Fix for shared interrupts
- drm: vc4: Fix colour order for xRGB1555 on HVS5
- drm: vc4: 0 is a valid value for pixel_order_hvs5, so fix conditionals
- drm: vc4: Omit pixel_order from the hvs_format for hvs5 only formats
- drm: vc4: Add 3:3:2 and 4:4:4:4 RGB/RGBX/RGBA formats
- drm: vc4: Add comments for which HVS_PIXEL_ORDER_xxx defines apply
- ARM: dts: zero-2-w: Better names for GPIOs 14 & 15
- ARM: dts: zero-w: Better names for GPIOs 14 & 15
- vc04_services: bcm2835-codec: Set crop_height for compressed formats
- vc04_services: bcm2835-codec: Set port format from s_selection
- media: dt-bindings: media: i2c: Add Arducam 64MP CMOS sensor binding
- media: i2c: Add driver of Arducam 64MP camera
- media: i2c: arducam_64mp: Advertise embedded data node on media pad 1
- overlays: Add arducam-64mp-overlay.dts
- ARM: dts: bcm2711: Use the rpi-vid-decoder driver
- overlays: Delete+deprecate the rpivid-v4l2 overlay
- ARM64: dts: Add Zero 2 W and CM4S
- Add HDMI1 facility to the driver.
- snd_bcm2835: disable HDMI audio when vc4 is used (#3640)
- staging: bcm2835-audio: Add disable-headphones flag
- ARM: dts: Adopt the upstream snd_bcm2835 handling
- overlays: Adjust for the new snd_bcm2835 handling
- net: phy: broadcom: Add Broadcom PTP hooks to bcm-phy-lib
- net: phy: broadcom: Add PTP support for some Broadcom PHYs.
- net: phy: Add support for 1PPS out and external timestamps
- overlays: Add the ramoops overlay
- Add PHY_ID_BCM54213PE identifier.
- Populate phy driver block for BCM54213PE
- clk: bcm: rpi: Add the BCM283x pixel clock.
- videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
- v4l2-ctrls: add support for dynamically allocated arrays.
- vivid: add dynamic array test control
- media: uapi: HEVC: Add missing fields in HEVC controls
- media: uapi: HEVC: Rename HEVC stateless controls with STATELESS prefix
- media: uapi: HEVC: Change pic_order_cnt definition in v4l2_hevc_dpb_entry
- media: uapi: HEVC: Add SEI pic struct flags
- media: uapi: HEVC: Add documentation to uAPI structure
- media: uapi: HEVC: Define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS as a
dynamic
array
- media: uapi: Move parsed HEVC pixel format out of staging
- media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS control
- media: uapi: Move the HEVC stateless control type out of staging
- media: controls: Log HEVC stateless control in .std_log
- media: hantro: Stop using Hantro dedicated control
- media: uapi: HEVC: fix padding in v4l2 control structures
- media: uapi: Change data_bit_offset definition
- media: uapi: move HEVC stateless controls out of staging
- media: rpivid: Apply V4L2 stateless API changes
- media: rpivid: Fix fallthrough warning
- media: rpivid: Set min value as well as max for HEVC_DECODE_MODE
- media: rpivid: Accept ANNEX_B start codes
- dtoverlays: Add overlay for Sony IMX258 image sensor
- drm/vc4: Correct interlaced timings again
- media: dt-bindings: imx258: Add alternate compatible strings
- media: i2c: imx258: Change register settings for variants of the sensor
- dtoverlays: Use PDAF variant for imx258 overlay
- staging: vc04_services: Fix clang14 warning
- overlays: Support i2c3-6 in container overlays
- media: i2c: ov9281: Correct min/def vts for 640x400
- media: i2c: ov9281: Change exposure default value with mode choice
- Overlay for GalaxyCore GC9A01 displays (#5086)
- rpi-simple-soundcard: Add Dion Audio KIWI streamer
- overlays: Add dionaudio-kiwi
- pinctrl: bcm2835: drop irq_enable/disable callbacks
- ARM: dts: Enable USB by default on CM4S
* IO errors when writing large amounts of data to USB storage in eoan on
RPI2/3 (armhf kernel) (LP: #1852510) // kinetic/linux-raspi: Update to
upstream raspberrypi rpi-5.19.y (2022-07-19) (LP: #1982090)
- Add dwc_otg driver
* Miscellaneous Ubuntu changes
- [Packaging] raspi: Initial import of debian.raspi from jammy:linux-raspi
(5.15.0-1012.14)
- [Packaging] raspi: Initial version of linux-raspi for Kinetic
- SAUCE: arm: dts: Add 'brcm,bcm2835-pl011' compatible for uart0
- SAUCE: arm: dts: Add 'brcm,bcm2835-gpio' compatible for gpio
- SAUCE: Revert "cgroup: Disable cgroup "memory" by default"
-- Juerg Haefliger <juerg.haefli...@canonical.com> Wed, 27 Jul 2022
17:49:45 +0200
** Changed in: linux-raspi (Ubuntu Kinetic)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-raspi in Ubuntu.
https://bugs.launchpad.net/bugs/1982090
Title:
kinetic/linux-raspi: Update to upstream raspberrypi rpi-5.19.y
(2022-07-19)
Status in linux-raspi package in Ubuntu:
Fix Released
Status in linux-raspi source package in Kinetic:
Fix Released
Bug description:
Upstream raspberrypi patchset 2022-07-19
Ported from the following raspberrypi branch:
rpi-5.19.y
from https://github.com/raspberrypi/linux.git
ARM: dts: Enable USB by default on CM4S
pinctrl: bcm2835: drop irq_enable/disable callbacks
overlays: Add dionaudio-kiwi
rpi-simple-soundcard: Add Dion Audio KIWI streamer
Overlay for GalaxyCore GC9A01 displays (#5086)
media: i2c: ov9281: Change exposure default value with mode choice
media: i2c: ov9281: Correct min/def vts for 640x400
overlays: Support i2c3-6 in container overlays
staging: vc04_services: Fix clang14 warning
dtoverlays: Use PDAF variant for imx258 overlay
media: i2c: imx258: Change register settings for variants of the sensor
media: dt-bindings: imx258: Add alternate compatible strings
drm/vc4: Correct interlaced timings again
dtoverlays: Add overlay for Sony IMX258 image sensor
media: rpivid: Accept ANNEX_B start codes
media: rpivid: Set min value as well as max for HEVC_DECODE_MODE
media: rpivid: Fix fallthrough warning
media: rpivid: Apply V4L2 stateless API changes
media: uapi: move HEVC stateless controls out of staging
media: uapi: Change data_bit_offset definition
media: uapi: HEVC: fix padding in v4l2 control structures
media: hantro: Stop using Hantro dedicated control
media: controls: Log HEVC stateless control in .std_log
media: uapi: Move the HEVC stateless control type out of staging
media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS control
media: uapi: Move parsed HEVC pixel format out of staging
media: uapi: HEVC: Define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS as a dynamic
array
media: uapi: HEVC: Add documentation to uAPI structure
media: uapi: HEVC: Add SEI pic struct flags
media: uapi: HEVC: Change pic_order_cnt definition in v4l2_hevc_dpb_entry
media: uapi: HEVC: Rename HEVC stateless controls with STATELESS prefix
media: uapi: HEVC: Add missing fields in HEVC controls
vivid: add dynamic array test control
v4l2-ctrls: add support for dynamically allocated arrays.
videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
clk: bcm: rpi: Add the BCM283x pixel clock.
Populate phy driver block for BCM54213PE
Add PHY_ID_BCM54213PE identifier.
overlays: Add the ramoops overlay
net: phy: Add support for 1PPS out and external timestamps
net: phy: broadcom: Add PTP support for some Broadcom PHYs.
net: phy: broadcom: Add Broadcom PTP hooks to bcm-phy-lib
overlays: Adjust for the new snd_bcm2835 handling
ARM: dts: Adopt the upstream snd_bcm2835 handling
staging: bcm2835-audio: Add disable-headphones flag
snd_bcm2835: disable HDMI audio when vc4 is used (#3640)
Add HDMI1 facility to the driver.
ARM64: dts: Add Zero 2 W and CM4S
overlays: Delete+deprecate the rpivid-v4l2 overlay
ARM: dts: bcm2711: Use the rpi-vid-decoder driver
overlays: Add arducam-64mp-overlay.dts
media: i2c: arducam_64mp: Advertise embedded data node on media pad 1
media: i2c: Add driver of Arducam 64MP camera
media: dt-bindings: media: i2c: Add Arducam 64MP CMOS sensor binding
vc04_services: bcm2835-codec: Set port format from s_selection
vc04_services: bcm2835-codec: Set crop_height for compressed formats
ARM: dts: zero-w: Better names for GPIOs 14 & 15
ARM: dts: zero-2-w: Better names for GPIOs 14 & 15
drm: vc4: Add comments for which HVS_PIXEL_ORDER_xxx defines apply
drm: vc4: Add 3:3:2 and 4:4:4:4 RGB/RGBX/RGBA formats
drm: vc4: Omit pixel_order from the hvs_format for hvs5 only formats
drm: vc4: 0 is a valid value for pixel_order_hvs5, so fix conditionals
drm: vc4: Fix colour order for xRGB1555 on HVS5
spi: bcm2835: Fix for shared interrupts
ARM: dts: Add bcm2709-rpi-cm2.dts
clk-raspberrypi: Enable minimize for all firmware clocks
drm/v3d: Switch clock setting to new api
drm/vc4: hvs: Ignore atomic_flush if we're disabled
random: do not use jump labels before they are initialized
vc04_services: squash: move to s32fract
media: i2c: imx477: Correct minimum exposure lines
media: imx296: Add the link frequency control
media: imx296: Set gain delay to 1 frame
media: imx296: Adjust exposure limits on vblank changes
media: imx296: Add horizontal and vertical flips support
media: imx296: Only advertise the full resolution mode
media: imx296: Add standby and stream on/off delays
media: imx296: Fix Bayer order
media: i2c: IMX296 camera sensor driver
dt-bindings: media: i2c: Add IMX296 CMOS sensor binding
vc04_services: bcm2835-codec: Add support for V4L2_PIX_FMT_NV12_COL128
vc04_services: vchiq-mmal: Add defines for mmal_es_format flags
mmc: block: Don't do single-sector reads during recovery
media: i2c: arducam-pivariety: Fixup for mainline API changes
media: i2c: Update irs1125 Kconfig entry
media: i2c: Update ov9281 Kconfig entry
media: i2c: Update imx477 Kconfig entry
media: i2c: Update ov2311 Kconfig entry
media: i2c: Update imx519 Kconfig entry
docs: hwmon: add emc2305.rst to docs
hwmon: emc2305: fixups for driver submitted to mailing lists
hwmon: (emc2305) add support for EMC2301/2/3/5 RPM-based PWM Fan Speed
Controller.
dtbindings: Fixup microchip,emc2305.yaml bindings
dt-bindings: hwmon: add microchip,emc2305.yaml dt binding description.
thermal: broadcom: Use dev_err_probe to suppress defer errors
media: i2c: Add driver of Arducam Pivariety series camera
media: dt-bindings: media: i2c: Add Arducam Pivariety Series CMOS sensor
binding
dt-bindings: vendor-prefixes: Add Arducam
staging: vchiq_arm: Add log_level module params
tpm_tis_spi_main: Force probe routine to run synchronously with driver and
device registration when IMA is enabled
clk-bcm2835: use subsys_initcall for the clock driver when IMA is enabled
rpivid: Use clk_get_max_rate()
clk: tests: Add tests for single parent mux
media: i2c: imx258: Support faster pixel rate on binned modes
media: i2c: imx258: Set pixel_rate range to the same as the value
media: i2c: imx258: Issue reset before starting streaming
media: i2c: imx258: Add support for long exposure modes
media: i2c: imx258: Correct max FRM_LENGTH_LINES value
media: i2c: imx258: Allow configuration of clock lane behaviour
media: i2c: imx258: Add get_selection for pixel array information
media: i2c: imx258: Follow normal V4L2 behaviours for clipping exposure
media: i2c: imx258: Add support for running on 2 CSI data lanes
media: i2c: imx258: Add support for 24MHz clock
media: i2c: imx258: Register the ctrls from fwnode properties
media: i2c: imx258: Make V4L2_CID_VBLANK configurable.
media: i2c: imx258: Add regulator control
media: i2c: imx258: Remove redundant I2C writes.
media: i2c: imx258: Implement HFLIP and VFLIP controls.
media: i2c: imx258: Disable digital cropping on binned modes
media: i2c: imx258: Make image geometry meet sensor requirements
media: i2c: imx258: Remove unused defines
drm/v3d: HACK: gut runtime pm for now.
drm/v3d: Hook up the runtime PM ops.
drm/v3d: Add support for 2711.
drm/panel: panel-ilitek9881c: Add prepare_upstream_first flag
drm/panel: ilitek-ili9881c: Clean up on mipi_dsi_attach failure
pinctrl: bcm2835: Only return non-GPIOs to inputs
mm,page_alloc,cma: introduce a customisable threshold for allocating pages in
cma
bcm2835-codec: Return empty buffers to the VPU instead of queueing to vbuf2
audioinjector.net: stereo and zero, use dev_err_probe, report success
drivers: staging: bcm2835-isp: Clear LS table handle in the firmware
media: i2c: Rename ad5398 to ad5398_vcm
media: i2c: ov5647: Use v4l2_async_register_subdev_sensor for lens binding
media: i2c: Add driver for AD5398 VCM lens driver
dt-bindings: media: i2c: Add binding for ad5398 VCM
bcm2835-codec: /dev/video31 as interface to image_encode JPEG encoder
staging: vc04_services: codec: Add support for V4L2_PIX_FMT_RGBA32 format
Revert "net: bcmgenet: Request APD, DLL disable and IDDQ-SR"
drivers: staging: bcm2835-isp: Do not cleanup mmal vcsm buffer on
stop_streaming
staging: vc04_services: isp: Permit all sRGB colour spaces on ISP outputs
media/i2c: Add driver for Omnivision OV2311
usb: xhci: rework XHCI_VLI_SS_BULK_OUT_BUG quirk
media: i2c: ov7251: Reinstate setting ov7251_global_init_setting
usb: xhci: add a quirk for Superspeed bulk OUT transfers on VL805
media: i2c: imx219: Scale the pixel clock rate for the 640x480 mode
media: bcm2835-unicam: Handle a repeated frame start with no end
spi: gpio: Add sck-idle-input property
bindings: Add sck-idle-input to spi-gpio
drm/panel/panel-sitronix-st7701: Support SPI config and RGB data
drm/panel: Add panel driver for TDO Y17B based panels
drm/panel: Add panel driver for Ilitek ILI9806E panel
drm/panel: simple: Remove custom handling of orientation
drm/panel: simple: add Geekworm MZP280 Panel
dt-bindings: display: simple: add Geekworm MZP280 Panel
dt-bindings: vendor-prefixes: Add Geekworm
media: uapi: Document format MEDIA_BUS_FMT_RGB565_1X24_CPADHI
Patching lan78xx for SOF_TIMESTAMPING_TX_SOFTWARE support
i2c: bcm2835: Make clock-stretch timeout configurable
media: i2c: ov9281: Initialize id_msb to zero in ov9281_check_sensor_id()
media: bcm2835-unicam: Set ret on error path in unicam_async_complete()
ASoC: bcm: allo-piano-dac-plus: Remove unnecessary const specifiers
ASoC: ma120x0p: Remove unnecessary const specifier
misc: bcm2835_smi: Use proper enum types for dma_{,un}map_single()
media: i2c: imx219: Correct the minimum vblanking value
Extending ili9881c driver support for nwe080 panel
drivers: bcm2835_unicam: Disable trigger mode operation
power: rpi-poe: Add option of being created by MFD or FW
power: rpi-poe: Drop CURRENT_AVG as it is not hardware averaged
pwm: raspberrypi-poe: Add option of being created by MFD or FW
mfd: simple-mfd-i2c: Add configuration for RPi POE HAT
bcm2835-v4l2-isp: Add missing lock initialization
Use GitHubs issue form for bug reports
media: i2c: ov9281: Increase diff between VTS and max exposure
uapi/v4l2-controls: Reset V4L2_CID_USER_BCM2835_ISP_BASE to same as 5.10
staging/bcm2835-isp: Fix cleanup after init fail
ASoC:ma120x0p: Increase maximum sample rate to 192KHz
media: i2c: ov7251: Make the enable GPIO optional.
media: i2c: ov5647: Add support for regulator control.
usb: xhci: add VLI_TRB_CACHE_BUG quirk
xhci: refactor out TRBS_PER_SEGMENT define in runtime code
media: imx219: Advertise embedded data node on media pad 1
xhci: correct room_on_ring() for cases where there is a single segment
xhci: quirks: add link TRB quirk for VL805
drm/panel-simple: Allow the bus format to be read from DT for panel-dpi
drm/panel-simple: Populate bpc when using panel-dpi
rtc: pcf8523: Fix oscillator stop bit handling
input: edt-ft5x06: Only look at the number of points reported
regulator/rpi-panel-attiny: Don't read the LCD power status
drivers: bcm2835_unicam: Add logging message when a frame is dropped.
staging/bcm2835-codec: Allow a different stride alignment per role
staging/bcm2835-codec: bytesperline for YUV420/YVU420 needs to be 64
input: edt-ft5x06: Handle unreliable TOUCH_UP events
media: rpivid: remove min_buffers_needed from src queue
drm/v3d: Allow -EACCES return from pm_runtime_get*
spi: spidev: Restore loading from Device Tree
Pass V4L2_CID_MPEG_VIDEO_H264_MIN_QP/MAX_QP to bcm2835-v4l2-codec
drivers: bcm2835_isp: Fix div by 0 bug.
drivers: bcm2835_isp: Allow multiple users for the ISP driver.
media: i2c: ov5647: Support HFLIP and VFLIP
brcmfmac: Protect against reprobing
brcmfmac: Read alternative firmware names from DT
brcmfmac: Don't promote INFO logging to ERR
bcm2835-v4l2-codec: Remove advertised support of VP8
media: i2c: imx477: Add vsync trigger_mode parameter
staging/bcm2835-camera: Add support for MPEG_VIDEO_FORCE_KEY_FRAME
staging/bcm2835-camera: Add support for H264_MIN_QP, H264_MAX_QP
media/bcm2835-unicam: Add support for configuration via MC API
media/bcm2835-unicam: Parse pad numbers correctly
vc04_services: isp: Report input node as wanting full range RAW color space
media: i2c: ov5647: Sensor should report RAW color space
media: i2c: imx519: Sensor should report RAW color space
media: i2c: imx477: Sensor should report RAW color space
media: i2c: imx290: Sensor should report RAW color space
media: i2c: imx219: Sensor should report RAW color space
drivers/gpio: Add a driver that wraps the PWM API as a GPIO controller
media: i2c: imx519: Advertise embedded data node on media pad 1
media: i2c: Add driver for IMX519 sensor
dt-bindings: media: i2c: Add IMX519 CMOS sensor binding
bcm2835_smi_dev: Fix handling of word-odd lengths
staging: bcm2835-codec: Add support for H&V Flips to ISP
staging: bcm2835-codec: Ensure all ctrls are set on streamon
staging: bcm2835_codec: Correct flushing code for refcounting
staging: mmal-vchiq: Reset buffers_with_vpu on port_enable
staging: bcm2835-codec: Queue flushed buffers instead of completing
staging/mmal-vchiq: Add module parameter to enable logging.
staging: bcm2835-codec: Signal the firmware to stop on all changes
staging: bcm2835-codec: Format changed should trigger drain
staging/mmal-vchiq: Rationalise included headers
staging/bcm2835-codec: Do not send buffers to the VPU unless streaming
staging: bcm2835-codec: Allow decode res changed before STREAMON(CAPTURE)
Add Raspberry Pi PoE+ HAT support
staging/bcm2835-v4l2_codec: Fix for encode selection API
staging/bcm2835_codec: Add support for image_fx to deinterlace
staging/vchiq-mmal: Add the deinterlace image effects enums
staging: bcm2835-codec: Allow custom specified strides/bytesperline.
staging/bcm2835_codec: Log MMAL flags in hex
staging/bcm2835-codec: Return buffers to QUEUED not ERROR state
staging/bcm2835-codec: Correct ENUM_FRAMESIZES stepsize to 2
staging/bcm2835-codec: Add support for decoding interlaced streams
staging/vchiq-mmal: Add parameters for interlaced video support
staging/vchiq-mmal: Add buffer flags for interlaced video
staging/bcm2835-codec: Change the default codec res to 32x32
Input: edt-ft54x6: Clean up timer and workqueue on remove
drm/panel-simple: Add a timing for the Raspberry Pi 7" panel
drm/panel/raspberrypi-touchscreen: Handle I2C errors.
staging: vchiq_arm: Usa a DMA pool for small bulks
staging: vchiq_arm: children inherit DMA config
staging: vchiq_arm: Add 36-bit address support
brcmfmac: Try product-specific clm_blob names first
sound/usb: call usb_autopm_get_interface() for devices that should not
sound/usb: add device quirks for A4Tech FHD 1080p webcams
media: i2c: imx477: Allow control of on-sensor DPC
usb: xhci: workaround for bogus SET_DEQ_PENDING endpoint state
media: i2c: ov7251: Add fwnode properties controls
media: i2c: imx290: Add fwnode properties controls
media: i2c: imx477: Fix framerates for 1332x990 mode
media: bcm2835-unicam: Forward input status from subdevice
media: i2c: imx477: Extend driver to support imx378 sensor
Documentation: devicetree: Add documentation for imx378 sensor
staging: vc04_services: isp: Set the YUV420/YVU420 format stride to 64 bytes
media: i2c: imx290: Fix clock setup register assignments
media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s
media: i2c: imx290: Support 60fps in 2 lane operation
media: i2c: imx477: Fix for long exposure limit calculations
bcm2835: Allow compressed frames to set sizeimage (#4386)
media: i2c: ov5647: Fix v4l2-compliance failure subscribing to events
media: i2c: ov5647: Correct minimum VBLANK value
media: i2c: ov5647: Correct pixel array offset
gpio-poweroff: Remember the old poweroff handler
staging/bcm2835-isp: Fix compiler warning
staging/bcm2835-codec: Do not update crop from S_FMT after res change
staging/bcm2835-camera: Add support for H264 levels 4.1 and 4.2
staging/bcm2835-codec: Pass corrupt frame flag.
staging/bcm2835-codec: Set the colourspace appropriately for RGB formats
staging/bcm2835-codec: Fix support for levels 4.1 and 4.2
drm/panel: jdi-lt070me05000: Use gpiod_set_value_cansleep
staging: fbtft: Add minipitft13 variant
staging/bcm2835-camera: Add support for DMABUFs
media: i2c: ov5647: Parse and register properties
media: ov5647: Fix return codes from ov5647_write/ov5647_read functions.
media: i2c: add ov9281 driver.
staging/bcm2835-codec: Add VC-1 support.
staging/bcm2835-codec: Implement additional g_selection calls for decode
staging/bcm2835-codec: Add support for pixel aspect ratio
media/v4l2_m2m: In buffered mode run jobs if either port is streaming
Assign crypto aliases to different AES implementation modules
media: bcm2835-unicam: Fix bug in buffer swapping logic
media: i2c: imx477: Remove unused function parameter
media: i2c: imx477: Remove internal v4l2_mbus_framefmt from the state
media: i2c: imx477: Replace existing 1012x760 mode
media: i2c: imx477: Fix crop height for 2028x1080 mode
media: i2c: imx290: Handle exposure correctly when vblank changes
media: i2c: imx290: Fix up exposure calcuations and ranges
media: i2c: imx477: Add very long exposure control to the driver
media: i2c: imx477: Remove auto frame length adjusting
bcm2835-isp: Allow formats with different colour spaces.
dt-binding: display: bcm2711-hdmi: Add CEC and hotplug interrupts
media: i2c: imx290: Fix number of controls in v4l2_ctrl_handler_init
media: i2c: imx290: Replace V4L2_CID_GAIN with V4L2_CID_ANALOGUE_GAIN
kbuild: Silence unavoidable dtc overlay warnings
spi: bcm2835: Workaround/fix for zero-length transfers
staging: vc04_services: ISP: Add colour denoise control
uapi: bcm2835-isp: Add colour denoise configuration
bcm2835-dma: Add bcm2835-dma: Add DMA_WIDE_SOURCE and DMA_WIDE_DEST flags
bcm2835-dma: Avoid losing CS flags after interrupt
staging/bcm2835-isp: Log the number of excess supported formats
staging/bcm2835-isp: Add the unpacked (16bpp) raw formats
staging/bcm2835-codec: Log the number of excess supported formats
staging/bcm2835-codec: Add the unpacked (16bpp) raw formats
staging/vc04_services: Add additional unpacked raw formats
vc-sm-cma: fixed kbuild problem
media: i2c: imx477: Selection compliance fixes
net: lan78xx: Ack pending PHY ints when resetting
PCI: brcmstb: Advertise MSI-X support
media: bcm2835-unicam: Clear clock state when stopping streaming
media: bcm2835-unicam: Return early from stop_streaming() if stopped
media: bcm2835-unicam: Correctly handle error propagation for stream on
dt-bindings: Add compatible for BCM2711 DSI1
drm/panel/raspberrypi-ts: Insert delay before polling for startup state
drm/panel/raspberrypi-touchscreen: Use independent I2C actions with delay.
Input: edt-ft5x06: Poll the device if no interrupt is configured.
PCI: brcmstb: Restore initial fundamental reset
phy: broadcom: Add bcm54213pe configuration
phy: broadcom: split out the BCM54213PE from the BCM54210E IDs
firmware: raspberrypi: Add support for tryonce reboot flag
watchdog: bcm2835: Ignore params after the partition number
bcm2708_fb: Fix a build warning
rpisense-fb: Set pseudo_pallete to prevent crash on fbcon takeover
gpio: Add gpio-fsm driver
staging: vc04_services: ISP: Add a more complex ISP processing component
uapi: bcm2835-isp: Add bcm2835-isp uapi header file
bcm2835-dma: only reserve channel 0 if legacy dma driver is enabled
staging: vc04_services: Add a V4L2 M2M codec driver
staging: mmal-vchiq: Use vc-sm-cma to support zero copy
staging: mmal-vchiq: Add monochrome image formats
staging: vchiq-mmal: Add support for 14bit Bayer
staging: vc04_services: Add new vc-sm-cma driver
staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32
char: Add broadcom char drivers back to build files
net: bcmgenet: Reset RBUF on first open
brcmfmac: Increase power saving delay to 2s
staging/fbtft: Add support for display variants
media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1
media: bcm2835-unicam: Retain packing information on G_FMT
media: bcm2835-unicam: Fixup review comments from Hans.
media: bcm2835: unicam: Fix uninitialized warning
media: bcm2835-unicam: Always service interrupts
media: i2c: imx477: Parse and register properties
media: i2c: imx477: Return correct result on sensor id verification
media: i2c: imx477: Add support for adaptive frame control
media: i2c: Add driver for Sony IMX477 sensor
media: i2c: tc358743: Only allow supported pixel fmts in set_fmt
media: bcm2835-unicam: Drop WARN on uing direct cache alias
bcm2835-dma: Advertise the full DMA range
leds: Add the actpwr trigger
dt-bindings: bcm2835-unicam: Update documentation with new clock params
media: bcm2835: unicam: Set VPU min clock freq to 250Mhz.
media: bcm2835-unicam: Ensure type is VIDEO_CAPTURE in [g|s]_selection
media: bcm2835-unicam: Reinstate V4L2_CAP_READWRITE in the caps
media: i2c: imx290: Set the colorspace fields in the format
media: i2c: imx290: Add support for g_selection to report cropping
media: i2c: imx290: Explicitly set v&h blank on mode change
bcm2835-dma: Add NO_WAIT_RESP flag
media: bcm2835-unicam: Add support for unpacked 14bit Bayer formats
media: bcm2835-unicam: Add support for 14bit mono sources
media: bcm2835-unicam: Add support for 12bit mono packed format
media: Add a pixel format for MIPI packed 14bit luma only.
media: Add a pixel format for MIPI packed 12bit luma only.
serial: 8250: bcm2835aux - defer if clock is zero
media: i2c: imx290: Switch set_hmax to use imx290_write_buffered_reg
media : i2c: imx290: Add support for the mono sensor variant.
media: dt-bindings: media: i2c: Add mono version to IMX290 bindings
media: i2c: imx290: Add H and V flip controls
media: i2c: imx290: Add exposure control to the driver.
media: i2c: imx290: Add support for V4L2_CID_VBLANK
media: i2c: imx290: Convert HMAX setting into V4L2_CID_HBLANK
media: i2c: imx290: Correct range for V4L2_CID_GAIN to 0-238
media: i2c: imx290: Add support for 74.25MHz clock
media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called
media: bcm2835-unicam: Avoid gcc warning over {0} on endpoint
media: bcm2835-unicam: Add support for get_mbus_config to set num lanes
media: bcm2835-unicam: Kconfig/Makefile for CCP2/CSI2 camera interface
media: bcm2835-unicam: Driver for CCP2/CSI2 camera interface
brcmfmac: Prefer a ccode from OTP over nvram file
media: irs1125: Keep HW in sync after imager reset
media: irs1125: Atomic access to imager reconfiguration
media: irs1125: Refactoring and debug messages
media: irs1125: Using i2c_transfer for ic2 reads
PCI: brcmstb: Add DT property to control L1SS
gpiolib: Don't prevent IRQ usage of output GPIOs
zswap: Defer zswap initialisation
staging:vc04_services: bcm2835-camera: Request headers with I-frame
staging: vc04_services: mmal-vchiq: Update parameters list
dt-bindings: media: i2c: Add IMX477 CMOS sensor binding
video: bcm2708_fb: Disable FB if no displays found
media: i2c: tc358743: Fix fallthrough warning
bcm2835-dma: Add proper 40-bit DMA support
staging: vchiq: Load bcm2835_isp driver from vchiq
media: uapi: v4l-ctrls: Add CID base for the bcm2835-isp driver
media: uapi: v4l2-core: Add ISP statistics output V4L2 fourcc type
media: uapi: Add MEDIA_BUS_FMT_SENSOR_DATA media bus format
media: uapi: v4l2-core: Add sensor ancillary data V4L2 foucc type.
driver: char: rpivid: Don't map more than wanted
spi: Force CS_HIGH if GPIO descriptors are used
driver: char: rpivid: Remove legacy name support
staging: media: Add Raspberry Pi V4L2 H265 decoder
RFC: media: Add media_request_{pin,unpin} API
media: dt-bindings: media: Add binding for the Raspberry PI HEVC decoder
media: videodev2.h: Add a format for column YUV4:2:0 modes
bcmgenet: Disable skip_umac_reset by default
dt-bindings: pci: Add DT docs for Brcmstb PCIe device
of: overlay: Correct symbol path fixups
video: fbdev: bcm2708_fb: Use common compat header
pinctrl: bcm2835: Remove gpiochip on error
staging: vchiq_arm: Give vchiq children DT nodes
Initialise rpi-firmware before clk-bcm2835
ARM: bcm: Backport BCM2711 support from upstream
staging: vchiq: Use the old dma controller for OF config on platform devices
staging: vchiq_arm: Set up dma ranges on child devices
clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks
v3d_gem: Kick the clock so firmware knows we are using firmware clock
interface
v3d_drv: Handle missing clock more gracefully
net:phy:2711 Allow ethernet LED mode to be set via device tree
staging: vchiq_arm: Register bcm2835-codec as a platform driver
staging: vchiq_arm: Register vcsm-cma as a platform driver
drm/v3d: Plug dma_fence leak
drm/v3d: Suppress all but the first MMU error
media: i2c: Add a driver for the Infineon IRS1125 depth sensor
dt-bindings: Add binding for the Infineon IRS1125 sensor
ARM: bcm: Switch board, clk and pinctrl to bcm2711 compatible
staging:bcm2835-camera: Fix the cherry-pick of AWB Greyworld
media: v4l2: Add Greyworld AWB control name
staging: bcm2835-camera: Add greyworld AWB mode
v4l2: Add a Greyworld AWB mode.
media: dt-bindings: Add binding for the Sony IMX219 sensor
arch/arm64: Add Revision, Serial, Model to cpuinfo
arch/arm: Add model string to cpuinfo
configs: arm64/bcm2711: Enable V3D
xhci: Use more event ring segment table entries
net: bcmgenet: Workaround #2 for Pi4 Ethernet fail
hid: usb: Add device quirks for Freeway Airmouse T3 and MX3
drivers: char: add chardev for mmap'ing the RPiVid control registers
drm/v3d: Clock V3D down when not in use.
i2c: bcm2835: Set clock-stretch timeout to 35ms
arm: bcm2835: Add bcm2838 compatible string.
usbhid: call usb_fixup_endpoint after mangling intervals
xhci: implement xhci_fixup_endpoint for interval adjustments
usb: add plumbing for updating interrupt endpoint interval state
soc: bcm: bcm2835-pm: Add support for 2711.
spi: bcm2835: enable shared interrupt support
net: genet: enable link energy detect powerdown for external PHYs
bcmgenet: Better coalescing parameter defaults
bcmgenet: constrain max DMA burst length
hwrng: iproc-rng200: Add BCM2838 support
arm: bcm2835: DMA can only address 1GB
arm: bcm2835: Fix FIQ early ioremap
w1: w1-gpio: Make GPIO an output for strong pullup
staging: mmal-vchiq: Fix memory leak in error path
staging: mmal-vchiq: Free the event context for control ports
staging: mmal-vchiq: Update mmal_parameters.h with recently defined params
staging: mmal_vchiq: Add in the Bayer encoding formats
staging: mmal-vchiq: Fix client_component for 64 bit kernel
media: videobuf2: Allow exporting of a struct dmabuf
staging: vc04_services: Support sending data to MMAL ports
staging: mmal-vchiq: Add support for event callbacks.
staging: mmal-vchiq: Avoid use of bool in structures
media: tc358743: Return an appropriate colorspace from tc358743_set_fmt
MAINTAINERS: Add entry for BCM2835 Unicam driver
dt-bindings: Document BCM283x CSI2/CCP2 receiver
media: videodev2: Add helper defines for printing FOURCCs
media: adv7180: Add YPrPb support for ADV7282M
media: adv7180: Default to the first valid input
media: tc358743: Check I2C succeeded during probe.
media: tc358743: Add support for 972Mbit/s link freq.
media: tc358743: Increase FIFO level to 374.
rtc: rv3028: Add backup switchover mode support
bcm2835-dma: Add support for per-channel flags
lan78xx: EEE support is now a PHY property
lan78xx: Debounce link events to minimize poll storm
firmware: raspberrypi: Report the fw variant during probe
net: lan78xx: Support auto-downshift to 100Mb/s
Update issue templates (#2736)
drivers: thermal: step_wise: avoid throttling at hysteresis temperature after
dropping below it
drivers: thermal: step_wise: add support for hysteresis
sc16is7xx: Don't spin if no data received
firmware: raspberrypi: Add backward compatible get_throttled
cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
MEDIA_SUBDRV_AUTOSELECT
lan78xx: Move enabling of EEE into PHY init code
brcmfmac: Re-enable firmware roaming support
net: lan78xx: Disable TCP Segmentation Offload (TSO)
irqchip: irq-bcm2835: Calc. FIQ_START at boot-time
firmware/raspberrypi: Notify firmware of a reboot
Add ability to export gpio used by gpio-poweroff
hid: Reduce default mouse polling interval to 60Hz
lan78xx: Read initial EEE status from DT
added capture_clear option to pps-gpio via dtoverlay (#2433)
i2c-gpio: Also set bus numbers from reg property
ARM: Activate FIQs to avoid __irq_startup warnings
dwc-otg: FIQ: Fix "bad mode in data abort handler"
ARM: bcm2835: Set Serial number and Revision
AXI performance monitor driver (#2222)
ARM64: Force hardware emulation of deprecated instructions.
ARM64: Round-Robin dispatch IRQs between CPUs.
hci_h5: Don't send conf_req when ACTIVE
brcm: adds support for BCM43341 wifi
OF: DT-Overlay configfs interface
bcm2835-virtgpio: Virtual GPIO driver
rpi_display: add backlight driver and overlay
Add support for all the downstream rpi sound card drivers
mfd: Add Raspberry Pi Sense HAT core driver
gpio-poweroff: Allow it to work on Raspberry Pi
Improve __copy_to_user and __copy_from_user performance
Added Device IDs for August DVB-T 205
leds: Add the "input" trigger, for pwr_led
firmware: bcm2835: Support ARCH_BCM270x
char: broadcom: Add vcio module
Add Chris Boot's i2c driver
Add SMI driver
Add /dev/gpiomem device for rootless user GPIO access
vc_mem: Add vc_mem driver for querying firmware memory addresses
Adding bcm2835-sdhost driver, and an overlay to enable it
MMC: added alternative MMC driver
dmaengine: Add support for BCM2708
fbdev: add FBIOCOPYAREA ioctl
Pulled in the multi frame buffer support from the Pi3 repo
bcm2708 framebuffer driver
Add dwc_otg driver
Main bcm2708/bcm2709 linux port
pinctrl-bcm2835: Set base to 0 give expected gpio numbering
tty: amba-pl011: Avoid rare write-when-full error
amba_pl011: Add cts-event-workaround DT property
amba_pl011: Insert mb() for correct FIFO handling
amba_pl011: Round input clock up
amba_pl011: Don't use DT aliases for numbering
lan78xx: Enable LEDs and auto-negotiation
irqchip: irq-bcm2836: Remove regmap and syscon use
i2c: bcm2835: Add debug support
Update vfpmodule.c
sound: Demote deferral errors to INFO level
bcm2835-rng: Avoid initialising if already enabled
bcm: Make RASPBERRYPI_POWER depend on PM
reboot: Use power off rather than busy spinning when halt is requested
watchdog: bcm2835: Support setting reboot partition
rtc: Add SPI alias for pcf2123 driver
dmaengine: bcm2835: Load driver early and support legacy API
spi: spidev: Completely disable the spidev warning
irqchip: irq-bcm2835: Add 2836 FIQ support
irqchip: bcm2835: Add FIQ support
irq-bcm2836: Avoid "Invalid trigger warning"
Protect __release_resource against resources without parents
cgroup: Disable cgroup "memory" by default
Allow mac address to be set in smsc95xx
smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default
smsx95xx: fix crimes against truesize
Revert "Bluetooth: Always request for user confirmation for Just Works"
Revert "Bluetooth: Always request for user confirmation for Just Works (LE
SC)"
Revert "spi: spidev: Fix CS polarity if GPIO descriptors are used"
cache: export clean and invalidate
arm: partially revert 702b94bff3c50542a6e4ab9a4f4cef093262fe65
clk-bcm2835: Remove VEC clock support
clk: bcm2835: Pass DT node to rpi_firmware_get
clk-bcm2835: Disable v3d clock
clk-bcm2835: Avoid null pointer exception
clk: bcm2835: Allow reparenting leaf clocks while they're running.
clk: bcm2835: Add support for setting leaf clock rates while running.
clk-bcm2835: Don't wait for pllh lock
clk: clk-bcm2835: Use %zd when printing size_t
clk-bcm2835: Read max core clock from firmware
clk-bcm2835: Add claim-clocks property
clk-bcm2835: Mark used PLLs and dividers CRITICAL
Register the clocks early during the boot process, so that special/critical
clocks can get enabled early on in the boot process avoiding the risk of
disabling a clock, pll_divider or pll when a claiming driver fails to install
propperly - maybe it needs to defer.
clk-raspberrypi: Add ISP to exported clocks
clk-raspberrypi: Add HEVC to exported clocks
clk-raspberrypi: Support VEC clock
config: Add default configs
BCM2708: Add core Device Tree support
kms/vc4_hdmi: Refuse 4096x2160@60 hdmi modes
drm/vc4: Move pixel doubling from Pixelvalve to HDMI block
drm/vc4: Correct HDMI timing registers for interlaced modes
drm/vc4: Add MISC_CONTROL register for vc4.
drm/vc4: Add HDMI format detection registers to register list
drm/atomic: If margins are updated, update all planes.
drm/vc4_hdmi: Force a modeset when Broadcast RGB setting changes
drm/vc4: hdmi: Fix no video output on DVI monitors
drm/vc4_kms: Protect hvs dereference on fkms
vc4_hdmi: Remove VC4_HDMI_SCHEDULER_CONTROL_VERT_ALWAYS_KEEPOUT
drm/vc4: kms: Use maximum FIFO load for the HVS clock rate
drm/vc4: Make sure we don't end up with a core clock too high
drm/vc4: kms: Warn if clk_set_min_rate fails
drm/vc4: hdmi: Rework hdmi_enable_4kp60 detection
drm/vc4_hdmi: Force modeset when bpc changes
drm/edid: Don't clear YUV422 if using deep color
drm/atomic-helpers: remove legacy_cursor_update hacks
drm/vc4: Force trigger of dlist update on margins change
vc4/drm:plane: Make use of chroma siting parameter
drm: Add chroma siting properties
vc4/drm: Handle fractional coordinates using the phase field
vc4/drm: vc4_plane: Keep fractional source coords inside state
drm/vc4: hdmi: Add CSC for BT601/709/2020 limited and full range output
drm/vc4: Support zpos on all planes
drm/tc358762: Set the pre_enable_upstream_first flag to configure DSI host
drm: Include drm_connector.h from drm_panel.h
drm/panel: Add prepare_upstream_first flag to drm_panel
drm/bridge: Introduce pre_enable_upstream_first to alter bridge init order
drm/vc4: Remove entry to ULPS from vc4_dsi post_disable
drm/vc4: Convert vc4_dsi to using a bridge instead of encoder.
drm/vc4: Convert vc4_dsi to use atomic enable/disable/mode_set.
drm/vc4: Remove splitting the bridge chain from the driver.
drm/vc4: Move DSI initialisation to encoder_mode_set.
drm/vc4: Rename bridge to out_bridge
drm/bridge: tc358762: Ignore EPROBE_DEFER when logging errors
drm/dsi: Document the meaning and spec references for MIPI_DSI_MODE_*
drm/vc4: For DPI, MEDIA_BUS_FMT_RGB565_1X16 is mode 1, not 3.
drm/panel: Add and initialise an orientation field to drm_panel
drm/vc4: dpi: Support DPI interface in mode3 for RGB565
media: uapi: add MEDIA_BUS_FMT_RGB565_1X24_CPADHI
drm/vc4: Add DRM 210101010 RGB formats for hvs5.
drm/vc4_hdmi: Add Broadcast RGB property to allow override of RGB range
drm/vc4: Disable Gamma control on HVS5 due to issues writing the table
drm/vc4: Add alpha_blend_mode property to each plane.
drm/vc4: Skip writes to disabled packet RAM
vc4/drm: Ignore vc4_hdmi->output_enabled for allowing audio (#4759)
drm/vc4: dpi: Ensure a default format is selected
drm/vc4: dpi: Add option for inverting pixel clock and output enable
drm/vc4: Move HDMI reset to pm_resume
drm/vc4: Add support for composite syncs to vc4_dpi
drm/vc4: Validate the size of the gamma_lut
drm/vc4: Only add gamma properties once.
drm/vc4: Enable gamma block only when required.
drm: Check whether the gamma lut has changed before updating
drm/vc4: Make VEC progressive modes readily accessible
drm/vc4: Relax VEC modeline requirements and add progressive mode support
drm/vc4: hvs: Force modeset on gamma lut change
drm/vc4: Add debugfs node that dumps the vc5 gamma PWL entries
drm/vc4: Add support for gamma on BCM2711
drm/vc4: Correct DSI divider calculations
drm/vc4: Release workaround buffer and DMA in error paths and unbind
drm/vc4: Reset HDMI MISC_CONTROL register.
drm/vc4: Add firmware-kms mode
raspberrypi-firmware: Update mailbox commands
drm/vc4: Refactor mode checking logic
drm/vc4: Allow setting the TV norm via module parameter
drm/vc4: Add support for more analog TV standards
drm/vc4: Fix definition of PAL-M mode
drm/vc4: Refactor VEC TV mode setting
drm/vc4: Fix timings for VEC modes
drm/vc4: Fix margin calculations for the right/bottom edges
drm/vc4: Fix timings for interlaced modes
drm/atomic: Don't fixup modes that haven't been reset
drm/vc4: Add correct stop condition to vc4_dsi_encoder_disable iteration
drm/vc4: Fix dsi0 interrupt support.
drm/vc4: Register dsi0 as the correct vc4 encoder type
drm/vc4: Correct pixel order for DSI0
vc4/drm: vc4_plane: Remove subpixel positioning check
vc4/drm: Avoid full hdmi audio fifo writes
drm/vc4: Change the default DPI format to being 18bpp, not 24.
vc4: Clear unused infoframe packet RAM registers
vc4_hdmi: Report that 3d/stereo is allowed
drm/vc4: Add the 2711 HVS as a suitable DMA node
drm/vc4: Add all the HDMI registers into the debugfs dumps
drm/vc4: Add debugfs node that dumps the current display lists
drm/vc4: A present but empty dmas disables audio
drm/vc4: Add FKMS as an acceptable node for dma ranges.
Support RPi DPI interface in mode6 for 18-bit color
drm/vc4: Adopt the dma configuration from the HVS or V3D component
clk: tests: Add missing test case for ranges
clk: tests: Add some tests for clk_get_rate_range()
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Test the clock pointer in clk_hw_get_name()
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its
caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Fix clk_get_parent() documentation
clk: Take into account uncached clocks in clk_set_rate_range()
clk: tests: Add some tests for orphan with multiple parents
clk: tests: Add tests for mux with multiple parents
clk: tests: Add tests for single parent mux
clk: tests: Add tests for uncached clock
clk: tests: Add reference to the orphan mux bug report
clk: tests: Add test suites description
clk: Clarify clk_get_rate() expectations
clk: Mention that .recalc_rate can return 0 on error
clk: Introduce clk_get_rate_range()
clk: Skip clamping when rounding if there's no boundaries
clk: Drop the rate range on clk_put()
arm64: setup: Fix build warning
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1982090/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
