@Devon, would you like to use oem kernel(6.1-oem)? ~~~ #sudo apt install linux-oem-22.-4c ~~~
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/2002601 Title: Wireless: Enable RTL8852BE wifi driver Status in HWE Next: New Status in linux package in Ubuntu: In Progress Status in linux-firmware package in Ubuntu: Fix Released Status in linux-oem-6.1 package in Ubuntu: Invalid Status in linux source package in Jammy: Invalid Status in linux-firmware source package in Jammy: Fix Released Status in linux-oem-6.1 source package in Jammy: Fix Released Status in linux source package in Lunar: In Progress Status in linux-firmware source package in Lunar: Fix Released Status in linux-oem-6.1 source package in Lunar: Invalid Bug description: [Justification] Enable Realtek RLT8852BE WIFI. [Test] 1. put rtw8852b_fw.bin in /lib/firmware/rtw89/ 2. boot-up with kernel enabled RTL8852be. 3. Connect to WIFI-AP and test with ping. * ping -I wlp2s0 8.8.8.8 ~~~ PING 8.8.8.8 (8.8.8.8) from 10.102.137.55 wlp2s0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_seq=1 ttl=116 time=5.86 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=116 time=6.21 ms 64 bytes from 8.8.8.8: icmp_seq=3 ttl=116 time=18.9 ms 64 bytes from 8.8.8.8: icmp_seq=4 ttl=116 time=6.09 ms 64 bytes from 8.8.8.8: icmp_seq=5 ttl=116 time=6.13 ms 64 bytes from 8.8.8.8: icmp_seq=6 ttl=116 time=5.77 ms ~~~ * Connected to AP ~~~ u@ubuntu:~$ nmcli dev DEVICE TYPE STATE CONNECTION enp3s0 ethernet connected Wired connection 1 wlp2s0 wifi connected Canonical p2p-dev-wlp2s0 wifi-p2p disconnected -- lo loopback unmanaged -- ~~~ * lsmod | grep 8852 ~~~ lsmod | grep 8852 rtw89_8852be 16384 0 rtw89_8852b 368640 1 rtw89_8852be rtw89_pci 61440 1 rtw89_8852be rtw89_core 442368 2 rtw89_8852b,rtw89_pci cfg80211 1081344 3 rtw89_8852b,rtw89_core,mac80211 ~~~ 4. cbd's built result, Lunar, ~~~ remote: Resolving deltas: 100% (391/391), completed with 118 local objects. remote: *** kernel-cbd ********************************************************* remote: * Queueing builds (your 'u_lMstrNxt'); ok to interrupt remote: * For results: ssh cbd ls kobako-lunar-0e58018b43c1-ioeM remote: * 96/480 cores busy (1/5 hosts), 0 builds queued remote: 2023-01-12 03:16:35 kobako-lunar-0e58018b43c1-ioeM/amd64/BUILD-OK remote: 2023-01-12 03:17:47 kobako-lunar-0e58018b43c1-ioeM/arm64/BUILD-OK remote: 2023-01-12 03:11:36 kobako-lunar-0e58018b43c1-ioeM/armhf/BUILD-OK remote: 2023-01-12 03:16:30 kobako-lunar-0e58018b43c1-ioeM/ppc64el/BUILD-OK remote: 2023-01-12 03:10:24 kobako-lunar-0e58018b43c1-ioeM/s390x/BUILD-OK remote: ************************************************************************ To cbd:lunar.git ~~~ OEM-6.1, remote: Resolving deltas: 100% (399/399), completed with 121 local objects. remote: *** kernel-cbd ********************************************************* remote: * Queueing builds (your 'oem-6.1-next'); ok to interrupt remote: * For results: ssh cbd ls kobako-jammy-c1002f30ccc3-m65z remote: * 0/192 cores busy (0/2 hosts), 0 builds queued remote: 2023-01-12 05:25:23 kobako-jammy-c1002f30ccc3-m65z/amd64/BUILD-OK remote: ************************************************************************ To cbd:jammy.git [Where problems could occur] Medium, a new driver so the current driver may have some edge cases didn't consider. [Misc] * For generic Jammy, need more patches to enable RTL8852be so only SRU for OEM-6.1. * firmware, dae5d4603b07) rtw89: 8852b: update fw to v0.27.32.1 has landed on Lunar, so only SRU for Jammy. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/2002601/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
