This bug was fixed in the package linux-oem-6.1 - 6.1.0-1015.15

---------------
linux-oem-6.1 (6.1.0-1015.15) jammy; urgency=medium

  * jammy/linux-oem-6.1: 6.1.0-1015.15 -proposed tracker (LP: #2024152)

  * Packaging resync (LP: #1786013)
    - [Packaging] resync git-ubuntu-log
    - [Packaging] resync getabis

  * CVE-2023-2430
    - io_uring: get rid of double locking
    - io_uring: extract a io_msg_install_complete helper
    - io_uring/msg_ring: move double lock/unlock helpers higher up
    - io_uring/msg_ring: fix missing lock on overflow for IOPOLL

  * LSM: Configuring Too Many LSMs Causes Kernel Panic on Boot (LP: #1987998)
    - SAUCE: LSM: Change Landlock from LSMBLOB_NEEDED to LSMBLOB_NOT_NEEDED

  * Some INVLPG implementations can leave Global translations unflushed when
    PCIDs are enabled (LP: #2023220)
    - x86/mm: Avoid incomplete Global INVLPG flushes

  * cls_flower: off-by-one in fl_set_geneve_opt (LP: #2023577)
    - net/sched: flower: fix possible OOB write in fl_set_geneve_opt()

  * CVE-2023-2176
    - RDMA/core: Refactor rdma_bind_addr

  * ALSA: hda/realtek: Enable headset onLenovo M70/M90 (LP: #2021449)
    - ALSA: hda/realtek: Enable headset onLenovo M70/M90

  * Add microphone support of the front headphone port on P3 Tower
    (LP: #2023650)
    - ALSA: hda/realtek: Add Lenovo P3 Tower platform

  * Add support of Smart Amplifier IC ALC1319D  on Intel platforms
    (LP: #2023201)
    - ASoC: Intel: soc-acpi: add table for RPL Dell SKU 0BDA

  * Fix speaker volume too low on HP G10 laptops (LP: #2023197)
    - ALSA: hda/realtek: Enable 4 amplifiers instead of 2 on a HP platform

  * System hang at reading amdgpu sysfs attribute psp_vbflash (LP: #2023307)
    - SAUCE: drm/amd: Make sure image is written to trigger VBIOS image update
      flow

  * System either hang with black screen or rebooted on entering suspend on AMD
    Ryzen 9 PRO 7940HS w/ Radeon 780M Graphics (LP: #2020685)
    - drm/amdgpu: refine get gpu clock counter method
    - drm/amdgpu/gfx11: update gpu_clock_counter logic

  * Fix Monitor lost after replug WD19TBS to SUT port with VGA/DVI to type-C
    dongle (LP: #2021949)
    - thunderbolt: Increase timeout of DP OUT adapter handshake
    - thunderbolt: Do not touch CL state configuration during discovery
    - thunderbolt: Increase DisplayPort Connection Manager handshake timeout

  * Fix Disable thunderbolt clx make edp-monitor garbage while moving the
    touchpad (LP: #2023004)
    - drm/i915: Explain the magic numbers for AUX SYNC/precharge length
    - drm/i915: Use 18 fast wake AUX sync len

  * Include the MAC address pass through function on RTL8153DD-CG (LP: #2020295)
    - r8152: add USB device driver for config selection

  * FM350(mtk_t7xx) failed to suspend, or early wake while suspending
    (LP: #2020743)
    - net: wwan: t7xx: Ensure init is completed before system sleep

 -- Timo Aaltonen <timo.aalto...@canonical.com>  Fri, 16 Jun 2023
11:51:13 +0300

** Changed in: linux-oem-6.1 (Ubuntu Jammy)
       Status: Fix Committed => Fix Released

** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2023-2176

** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2023-2430

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-oem-6.1 in Ubuntu.
https://bugs.launchpad.net/bugs/2023004

Title:
  Fix Disable thunderbolt clx make edp-monitor garbage while moving the
  touchpad

Status in HWE Next:
  New
Status in linux package in Ubuntu:
  Fix Committed
Status in linux-oem-6.1 package in Ubuntu:
  Invalid
Status in linux source package in Jammy:
  In Progress
Status in linux-oem-6.1 source package in Jammy:
  Fix Released
Status in linux source package in Kinetic:
  In Progress
Status in linux-oem-6.1 source package in Kinetic:
  Invalid
Status in linux source package in Lunar:
  Fix Committed
Status in linux-oem-6.1 source package in Lunar:
  Invalid
Status in linux source package in Mantic:
  Fix Committed
Status in linux-oem-6.1 source package in Mantic:
  Invalid

Bug description:
  [impact]
  The default sync pulse length for fast wake AUX transactions was changed from 
18 to 10, which was causing issues with some eDP panels.

  [fix]
  Revert the sync pulse length for fast wake AUX transactions back to the 
hardware default of 18 (10 precharge + 8 preamble).

  [test cases]
  1. configure with thunderbolt.clx=0.
  2. check edp's behavior and it should work well and there's no garbage.

  [where the issue could happen]
  low, By reverting this setting back to the default, this commit restores 
stability for configurations using fast wake AUX transactions, especially those 
involving eDP panels that were incompatible with the shorter sync pulse length. 
The longer, hardware-default sync pulse length is compatible with more use 
cases.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/2023004/+subscriptions


-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to     : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to