Public bug reported:
After upgrading to 23.10 the gpio-fan overlay no longer seems to work on
my Pi 4 B.
dtoverlay=gpio-fan,gpiopin=3,temp=70000
With 22.04 und 23.04 the fan was off until 70 degree were reached. But
with 23.10 the fan is always on now.
Here's the full /boot/firmware/config.txt:
[pi4]
max_framebuffers=2
arm_boost=1
[all]
arm_64bit=1
kernel=vmlinuz
cmdline=cmdline.txt
initramfs initrd.img followkernel
# Enable the audio output, I2C and SPI interfaces on the GPIO header
dtparam=audio=on
dtparam=i2c_arm=on
dtparam=spi=on
# Enable the serial pins
enable_uart=1
# Comment out the following line if the edges of the desktop appear outside
# the edges of your display
disable_overscan=1
# If you have issues with audio, you may try uncommenting the following line
# which forces the HDMI output into HDMI mode instead of DVI (which doesn't
# support audio output)
#hdmi_drive=2
# If you have a CM4, uncomment the following line to enable the USB2 outputs
# on the IO board (assuming your CM4 is plugged into such a board)
#dtoverlay=dwc2,dr_mode=host
dtoverlay=gpio-fan,gpiopin=3,temp=70000
ProblemType: Bug
DistroRelease: Ubuntu 23.10
Package: linux-raspi 6.5.0.1006.7
ProcVersionSignature: Ubuntu 6.5.0-1006.8-raspi 6.5.3
Uname: Linux 6.5.0-1006-raspi aarch64
AlsaVersion: Advanced Linux Sound Architecture Driver Version k6.5.0-1006-raspi.
AplayDevices: Error: [Errno 2] No such file or directory: 'aplay'
ApportVersion: 2.27.0-0ubuntu5
Architecture: arm64
ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord'
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path',
'/dev/snd/controlC0', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer']
failed with exit code 1:
CRDA: N/A
Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer'
Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer'
CasperMD5CheckResult: unknown
CloudArchitecture: aarch64
CloudBuildName: server
CloudID: nocloud
CloudName: unknown
CloudPlatform: nocloud
CloudSerial:
CloudSubPlatform: config-disk (/dev/mmcblk0p1)
Date: Sun Oct 29 16:34:49 2023
ImageMediaBuild: 20201022
IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig'
Lspci-vt: -[0000:00]---00.0-[01]----00.0 VIA Technologies, Inc. VL805/806 xHCI
USB 3.0 Controller
Lsusb:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Lsusb-t:
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
PciMultimedia:
ProcEnviron:
LANG=en_US.UTF-8
LC_CTYPE=UTF-8
PATH=(custom, no user)
SHELL=/bin/bash
TERM=xterm-256color
ProcFB:
ProcKernelCmdLine: coherent_pool=1M 8250.nr_uarts=1
snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1
snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0
bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:FE:2D:4A
vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0
console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4
elevator=deadline rootwait fixrtc quiet splash
RelatedPackageVersions:
linux-restricted-modules-6.5.0-1006-raspi N/A
linux-backports-modules-6.5.0-1006-raspi N/A
linux-firmware 20230919.git3672ccab-0ubuntu2.1
SourcePackage: linux-raspi
StagingDrivers: bcm2835_mmal_vchiq bcm2835_isp rpivid_hevc bcm2835_codec
vc_sm_cma snd_bcm2835 bcm2835_v4l2
UpgradeStatus: Upgraded to mantic on 2023-10-29 (0 days ago)
acpidump:
** Affects: linux-raspi (Ubuntu)
Importance: Undecided
Status: New
** Tags: apport-bug arm64 arm64-image cloud-image mantic raspi-image staging
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-raspi in Ubuntu.
https://bugs.launchpad.net/bugs/2041748
Title:
gpio-fan overlay no longer working after upgrade to 23.10 (fan always
on)
Status in linux-raspi package in Ubuntu:
New
Bug description:
After upgrading to 23.10 the gpio-fan overlay no longer seems to work
on my Pi 4 B.
dtoverlay=gpio-fan,gpiopin=3,temp=70000
With 22.04 und 23.04 the fan was off until 70 degree were reached. But
with 23.10 the fan is always on now.
Here's the full /boot/firmware/config.txt:
[pi4]
max_framebuffers=2
arm_boost=1
[all]
arm_64bit=1
kernel=vmlinuz
cmdline=cmdline.txt
initramfs initrd.img followkernel
# Enable the audio output, I2C and SPI interfaces on the GPIO header
dtparam=audio=on
dtparam=i2c_arm=on
dtparam=spi=on
# Enable the serial pins
enable_uart=1
# Comment out the following line if the edges of the desktop appear outside
# the edges of your display
disable_overscan=1
# If you have issues with audio, you may try uncommenting the following line
# which forces the HDMI output into HDMI mode instead of DVI (which doesn't
# support audio output)
#hdmi_drive=2
# If you have a CM4, uncomment the following line to enable the USB2 outputs
# on the IO board (assuming your CM4 is plugged into such a board)
#dtoverlay=dwc2,dr_mode=host
dtoverlay=gpio-fan,gpiopin=3,temp=70000
ProblemType: Bug
DistroRelease: Ubuntu 23.10
Package: linux-raspi 6.5.0.1006.7
ProcVersionSignature: Ubuntu 6.5.0-1006.8-raspi 6.5.3
Uname: Linux 6.5.0-1006-raspi aarch64
AlsaVersion: Advanced Linux Sound Architecture Driver Version
k6.5.0-1006-raspi.
AplayDevices: Error: [Errno 2] No such file or directory: 'aplay'
ApportVersion: 2.27.0-0ubuntu5
Architecture: arm64
ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord'
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path',
'/dev/snd/controlC0', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer']
failed with exit code 1:
CRDA: N/A
Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer'
Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer'
CasperMD5CheckResult: unknown
CloudArchitecture: aarch64
CloudBuildName: server
CloudID: nocloud
CloudName: unknown
CloudPlatform: nocloud
CloudSerial:
CloudSubPlatform: config-disk (/dev/mmcblk0p1)
Date: Sun Oct 29 16:34:49 2023
ImageMediaBuild: 20201022
IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig'
Lspci-vt: -[0000:00]---00.0-[01]----00.0 VIA Technologies, Inc. VL805/806
xHCI USB 3.0 Controller
Lsusb:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Lsusb-t:
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
PciMultimedia:
ProcEnviron:
LANG=en_US.UTF-8
LC_CTYPE=UTF-8
PATH=(custom, no user)
SHELL=/bin/bash
TERM=xterm-256color
ProcFB:
ProcKernelCmdLine: coherent_pool=1M 8250.nr_uarts=1
snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1
snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0
bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:FE:2D:4A
vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0
console=ttyS0,115200 console=tty1 root=LABEL=writable rootfstype=ext4
elevator=deadline rootwait fixrtc quiet splash
RelatedPackageVersions:
linux-restricted-modules-6.5.0-1006-raspi N/A
linux-backports-modules-6.5.0-1006-raspi N/A
linux-firmware 20230919.git3672ccab-0ubuntu2.1
SourcePackage: linux-raspi
StagingDrivers: bcm2835_mmal_vchiq bcm2835_isp rpivid_hevc bcm2835_codec
vc_sm_cma snd_bcm2835 bcm2835_v4l2
UpgradeStatus: Upgraded to mantic on 2023-10-29 (0 days ago)
acpidump:
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/2041748/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
