** Tags removed: verification-needed-jammy-linux-intel-iotg ** Tags added: verification-done-jammy-linux-intel-iotg
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2045386 Title: Add ODM driver gpio-m058ssan Status in HWE Next: New Status in linux package in Ubuntu: New Status in linux source package in Jammy: Fix Released Bug description: From accccb1655aff54bdbd7a6d5867b9c176d577ea4 Mon Sep 17 00:00:00 2001 From: Filippo Copetti <filippo.cope...@eurotech.com> Date: Mon, 4 Dec 2023 14:45:07 +0100 Subject: [PATCH 2/3] Add gpio-m058ssan kernel driver BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2045386 [ Impact ] gpio-m058ssan driver needed for ODM partner [ Test Plan ] Connect the loopback GPIO connector to the ReliaCOR-40-13 system and connect the power supply of the GPIO connector. insert the "m058ssan" module: modprobe m058ssan create GPIOchip: echo "m058ssan 0x40" > /sys/bus/i2c/devices/i2c-0/new_device get the GPIO chip base and export 16 GPIOs. The former 8 are GPOs , the latter 8 are GPIs. Set and reset all of the GPOs one at a time and check that the corresponding GPI is set and reset accordingly. [ Where problems could occur ] Make sure that the power supply of the GPIO connector is correctly connected, otherwise the GPI will always report 0. Events could occur on the i2c bus communication that may cause miss-behavior of the driver. [ Other Info ] To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/2045386/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
