On Sun, May 1, 2011 at 2:55 AM, Bart Van Assche <bvanass...@acm.org> wrote: > > There is something else and completely unrelated that is puzzling me though: > on two almost identical systems one always recognizes all internal PCIe > cards but the other system not. This is something that seldom happened with > 2.6.34 but happens frequently with 2.6.38 and 2.6.39-rcx. What I see is that > during boot either both InfiniBand PCIe cards are recognized or that one > specific card is not recognized and even doesn't show up in the lspci > output. A BIOS upgrade didn't help. Any idea where I should start looking to > find the cause of this issue ?
So it has happened sporadically before, but happens much more commonly now? That very much implies some timing issue in PCI probing. It could be, for example, that the card has a very slow reset sequence, and doesn't respond to PCI config cycles until it has internally booted fully. If so, a faster boot by the kernel might just cause the Linux PCI enumeration to be done before the card is ready. (That's a really unlikely scenario - I'm not seriously suggesting that the card would be quite <i>that</i> stupid and slow. But there might be similar issues at a much lower level, ie if the Linux pcie port driver might be resetting the port and then trying to read the card too quickly afterwards, and you'd want some added delay there). Have you tried it "pcie_ports=compat" (or "native") makes any difference? But you should probably contact Jesse Barnes and the linux-pci mailing list and see if anybody has any smarter ideas. Linus -- To unsubscribe from this list: send the line "unsubscribe kernel-testers" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html