On Wed, 2020-07-15 at 15:33 +0800, Ben Chuang wrote:
> The format string of the task descriptor should be "%016llx".
There are a lot of these:
$ git grep -P -n '\b0x\d+%'
arch/m68k/include/asm/mmu_context.h:166: pr_info("ksp load failed:
mm=0x%p ksp=0x08%lx\n", mm, mmuar);
arch/powerpc/kvm/book3s_xive.c:1706: pr_devel(" val=0x016%llx (server=0x%x,
guest_prio=%d)\n",
drivers/atm/eni.c:590: EVENT("bad PDU
(descr=0x08%lx,length=%ld)\n",descr,
drivers/dma/ppc4xx/adma.c:4366: "uses 0x1%02x polynomial.\n",
reg);
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:3023: DRM_INFO("Using rlc
debug ucode. mmRLC_GPM_GENERAL_6 ==0x08%x / fw_ver == %i \n",
drivers/gpu/drm/i915/intel_uncore.c:495:
drm_dbg(&uncore->i915->drm, "GTFIFODBG = 0x08%x\n", fifodbg);
drivers/media/usb/gspca/ov519.c:2760:
gspca_err(gspca_dev, "Unknown sensor: 0x76%02x\n",
drivers/mmc/host/cqhci.c:425: pr_debug("%s: cqhci: tag %d task descriptor
0x016%llx\n",
drivers/mmc/host/s3cmci.c:192: "#%u%s op:%i arg:0x%08x flags:0x08%x
retries:%u",
drivers/net/can/flexcan.c:1517: "gpr %s req_gpr=0x02%x req_bit=%u
ack_gpr=0x02%x ack_bit=%u\n",
drivers/net/ethernet/intel/i40e/i40e_debugfs.c:444: " info:
cmd_reserved[] = 0x%02x 0x%02x 0x%02x 0x0%02x 0x%02x 0x%02x 0x%02x 0x0%02x\n",
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c:1397:
"i = %d buffer_info->dma = 0x08%llx buffer_info->length = 0x%x\n",
drivers/net/wireless/intel/iwlwifi/pcie/trans.c:2298: "Queue %d is
%sactive on fifo %d and stuck for %u ms. SW [%d, %d] HW [%d, %d] FH
TRB=0x0%x\n",
drivers/net/wireless/intersil/hostap/hostap_hw.c:779:
"(%d,0x04%x,%d); reg=0x%04x\n",
drivers/net/wireless/realtek/rtw88/rtw8822c.c:429: rtw_dbg(rtwdev,
RTW_DBG_RFK, "[DACK] ADCK 0x%08x=0x08%x\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6161: ioc_err(ioc, "device is
not present handle(0x04%x)!!!\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6923: ioc_err(ioc, "device is
not present handle(0x04%x)!!!\n",
drivers/staging/rtl8723bs/hal/hal_com_phycfg.c:328:
DBG_871X("Invalid RegAddr 0x3%x in PHY_GetRateSectionIndexOfTxPowerByRate()",
RegAddr);
drivers/usb/serial/spcp8x5.c:225: dev_dbg(&port->dev, "0xc0:0x22:0:6 %d
- 0x02%x\n", ret, *buf);
drivers/video/fbdev/s1d13xxxfb.c:500: dbg_blit("(copyarea) bpp=%d=0x0%d,
mem_offset1=%d, mem_offset2=%d\n", bpp, (bpp >> 1),
sound/pci/es1938.c:306: "snd_es1938_write_cmd timeout
(0x02%x/0x02%x)\n", cmd, v);
sound/pci/es1938.c:319: dev_err(chip->card->dev, "get_byte timeout: status
0x02%x\n", v);
_______________________________________________
Kernelnewbies mailing list
[email protected]
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
