On Tue, Nov 23, 2021 at 4:36 AM Pintu Agarwal <pintu.p...@gmail.com> wrote: > > Hi, > > For rootfs dm-verity I am trying to pass dm-mod.create from our > bootloader but it seems not working for me. > So, I need some guidance on the parameters that we pass here. > The documentation also does not seem to help much. > > Kernel: 4.14 (with dm-init patch backported) > Target: Arm-32 / NAND / Simple Busybox / Bootloader (edk2) > Build: Ubuntu-18.04 / Yocto 2.6 > > Steps I followed: > 1) First I am trying to generate the root hash for our rootfs using > the veritysetup command: > $ ls -l system.img > 64172032 ==> IMAGE_SIZE > $ veritysetup format system.img dm-init-verity.img > UUID: eca62b73-b66a-4249-834b-471e83fc382c > Hash type: 1 > Data blocks: 15667 > Data block size: 4096 > Hash block size: 4096 > Hash algorithm: sha256 > Salt: > 8b66f42c07f576429109cf4e5d12ec072b23d242a9e653ac3423e49647339f5b > Root hash: > 10d9036f6efdd48dd49f09c8ece016a36a2c4d9a01a1f77f01485c65cf0e78af > > 2) Then I am trying to append the verity with the system image itself: > $ cat dm-init-verity.img >> system.img > > 3) After that I am trying to pass dm-mod.create parameter like this: > dm-mod.create=\"system,,,ro, 0 IMAGE_SIZE/512 verity 1 > /dev/ubiblock0_0 /dev/ubiblock0_0 4096 4096 DATA_BLOCKS 1 sha256 > 10d9036f6efdd48dd49f09c8ece016a36a2c4d9a01a1f77f01485c65cf0e78af > 8b66f42c07f576429109cf4e5d12ec072b23d242a9e653ac3423e49647339f5b\" > > 4) The Kernel command line seems to be updated properly: > [ 0.000000] Kernel command line:.. rootfstype=squashfs > ubi.mtd=40,0,30 ubi.block=0,0 root=/dev/ubiblock0_0 > dm-mod.create="system,,,ro, 0 125336 verity 1 /dev/ubiblock0_0 > /dev/ubiblock0_0 4096 4096 15667 1 sha256 > 10d9036f6efdd48dd49f09c8ece016a36a2c4d9a01a1f77f01485c65cf0e78af > 8b66f42c07f576429109cf4e5d12ec072b23d242a9e653ac3423e49647339f5b" .... > > But it does not seem to work as expected. > It gives below errors: > .... > [ 4.747708] block ubiblock0_0: created from ubi0:0(system) > [ 4.752313] device-mapper: init: waiting for all devices to be > available before creating mapped devices > [ 4.752313] > [ 4.766061] device-mapper: verity: sha256 using implementation > "sha256-generic" > [ 4.776178] device-mapper: ioctl: dm-0 (system) is ready > [ 4.848886] md: Skipping autodetection of RAID arrays. > (raid=autodetect will force) > [ 4.849288] VFS: Cannot open root device "ubiblock0_0" or > unknown-block(252,0): error -16
I'd start with changing your root device to point to the device mapper one you've just created. E.g., root=/dev/dm-0 Then see how it goes from there. > .... > > I followed almost the same example from dm-init document: > "verity": > dm-verity,,4,ro, > 0 1638400 verity 1 8:1 8:2 4096 4096 204800 1 sha256 > fb1a5a0f00deb908d8b53cb270858975e76cf64105d412ce764225d53b8f3cfd > 51934789604d1b92399c52e7cb149d1b3a1b74bbbcb103b2a0aaacbed5c08584 > > But this seems only refer to system and verity on a different blocks. > I am not sure what parameter should be changed if my verity metadata > is part of system image itself. > Also, I don't know how 1638400;204800;1 is calculated here based on image > size ? It's the range of sectors covered by the device 0 to size_in_sectors: (data_blocks * block_size)/sector_size (15667 * 4096)/512 125336 which you have in your entry already. > So, people who have made this working successfully, please share the > correct parameter to be used for the same block device. hth, will _______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies