On Wed, Jul 3, 2024 at 4:21 AM Jamaleddine AMGHAR <je.amg...@gmail.com> wrote: > > I am experiencing an abnormal performance issue with my Samsung SSD 970 EVO > Plus 1TB (2B2QEXM7) on my Ubuntu 24.04 LTS system. My setup includes a 12th > Gen Intel Core i7-12700 x 20 processor, and the SSD is connected to an M.2 > M-key, type-2280 slot (PCIe Gen.3 x4 interface) that supports NVMe on the > motherboard. > > Specifically, I have noticed a significantly low write speed of around > 700MB/s on my Ubuntu system. After some research, it appears that many users > face similar issues when using NVMe drives on Linux. In contrast, when I > tested the same SSD on the same motherboard using a portable Windows OS, the > write speed was approximately 3GB/s. > > Could you provide any methods to optimize the performance of my NVMe drive on > Linux? Additionally, how can I update the NVMe driver on Linux using > "nvme-cli"? Any advice or recommendations you have to address this issue > would be greatly appreciated.
To help with the second question, see <https://www.samsung.com/ca/support/memory-storage/update-the-firmware-of-your-samsung-ssd/>. I used Windows on a thumb drive to update the firmware of several Samsung SSDs used in my Linux machines. For one of the drives, I seem to recall the program said it could not find a Samsung SSD though it was installed. I assumed it was a counterfeit drive from Amazon. (I use the same WIndows thumb drive to update BIOS and UEFI, too). Jeff _______________________________________________ Kernelnewbies mailing list Kernelnewbies@kernelnewbies.org https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
