>[EMAIL PROTECTED] escreveu: >> >> >> I feel, better to start from application to low level driver, as >> follows: >> > - Try to understand/Analyze all Layers(L2,L3,L4) headers, by writing >> your own packet sniffer application. > >> - Try to understand the basic protocols, like ARP, TCP/UDP. > >> - Try to understand the network packet flow(Tx/Rx), from > application/socket to network driver (hard_start_xmit()/) or vice versa. > >> - Try to understand any network driver (mainly, Tx/Rx packet flow) > example: intel driver e1000 (kernel-src/driver/net/e1000/*). >> > >> Regards, >> Mythri. > > -- > To unsubscribe from this list: send an email with "unsubscribe > kernelnewbies" to [EMAIL PROTECTED] Please read the FAQ at > http://kernelnewbies.org/FAQ > > > >You'll need also to learn a lot of network theory. It's all on the RFCs >(http://www.ietf.org/rfc.html) or other good network book.
My suggestion is better to go through books in learning/starting stage, because RFC takes much time/complex to understand. And start practical's with packet Sniffer/Generator programs parallel to analyze the L2/L3/L4 headers. For practical: UNIX Network Programming by Richard Stevens. For Theory of Network basics: "Internetworking with TCP/IP By Douglas Comer".(for getting knowledge on Layers headers, protocols). -- To unsubscribe from this list: send an email with "unsubscribe kernelnewbies" to [EMAIL PROTECTED] Please read the FAQ at http://kernelnewbies.org/FAQ
