Sorry I am really confused about what you want to do. :-( You should
take the time to read the USB kernel documentation in linux/
Documentation/usb.
Regards,
-- Mark
On Dec 31, 2008, at 6:28 AM, niamathullah sharief wrote:
ok katiyar and mark...i am ready to enable that usb support in
kernel...when i enable it will work...but my project is it should
not work...i have to make the USB port work...so what to do for
that...the USB port should not work when i insert any type of USB
devices...even it should not dtect that device....after that i have
to make that USB port to work...so what to do for that?sorry if i
confussed you people...kindly help me...cause i novice....
--- On Wed, 31/12/08, Manish Katiyar <mkati...@gmail.com> wrote:
From: Manish Katiyar <mkati...@gmail.com>
Subject: Re: symbol table....
To: "Mark Brown" <ma...@marksmachinations.com>
Cc: sharie...@yahoo.co.in, "Kernel newbies" <kernelnewbies@nl.linux.org
>
Date: Wednesday, 31 December, 2008, 10:01 AM
On Wed, Dec 31, 2008 at 9:29 AM, Mark Brown <ma...@marksmachinations.com
>
wrote:
> Hi,
> I think you are missing the point that you need to build USB
support in
> order to use USB drivers. Please enable USB Support in your kernel
and
then
> you should be able to load USB driver modules.
> Regards,
> -- Mark
> On Dec 30, 2008, at 9:59 PM, niamathullah sharief wrote:
>
> Thanks for your reply....yes denis..i know to reconfigure the
kernel with
> USB support...but i dont want to do that...i want to do it
manually...
I think you are confused between "building in kernel" and
"building it
as module". You anyway have to enable the support in kernel if you
have to use it.
thanks -
Manish
.so
> that i am asking....
>
> --- On Wed, 31/12/08, Denis Borisevich <dennis...@gmail.com> wrote:
>
> From: Denis Borisevich <dennis...@gmail.com>
> Subject: Re: symbol table....
> To: sharie...@yahoo.co.in
> Cc: "Mark Brown" <ma...@marksmachinations.com>,
"Kernel newbies"
> <kernelnewbies@nl.linux.org>
> Date: Wednesday, 31 December, 2008, 12:21 AM
>
> 2008/12/30 niamathullah sharief <sharie...@yahoo.co.in>:
>>
>> yes mark...i know that...actually i disabled that....cause i have
to
> enable
>> manually by disabling that...thats what i am asking...what to
do...how
to
>> resolve that problem.....how to insert that
"ehci-hcd.ko,uhci-hcd.ko
> or
>> ohci-hcd.ko modules"...please kindly help me what to do....
>
> You need to reconfigure (Enable USB support) and then recompile your
kernel.
>
> --
> Denis
>
> --
> To unsubscribe from this list: send an email with
> "unsubscribe kernelnewbies" to ecar...@nl.linux.org
> Please read the FAQ at http://kernelnewbies.org/FAQ
>
>
> ________________________________
> Get perfect Email ID for your Resume. Get before others grab.
>
Get perfect Email ID for your Resume. Get before others grab.
