On Thu, Jul 23, 2020 at 8:00 AM Bjorn Helgaas <helg...@kernel.org> wrote: > > On Wed, Jul 22, 2020 at 03:50:48PM -0600, Jerry Hoemann wrote: > > On Wed, Jul 22, 2020 at 10:21:23AM -0500, Bjorn Helgaas wrote: > > > On Wed, Jul 22, 2020 at 10:52:26PM +0800, Kairui Song wrote: > > > > > I think I didn't make one thing clear, The PCI UR error never arrives > > > > in kernel, it's the iLo BMC on that HPE machine caught the error, and > > > > send kernel an NMI. kernel is panicked by NMI, I'm still trying to > > > > figure out why the NMI hanged kernel, even with panic=-1, > > > > panic_on_io_nmi, panic_on_unknown_nmi all set. But if we can avoid the > > > > NMI by shutdown the devices in right order, that's also a solution. > > ACPI v6.3, chapter 18, does mention NMIs several times, e.g., Table > 18-394 and sec 18.4. I'm not familiar enough with APEI to know > whether Linux correctly supports all those cases. Maybe this is a > symptom that we don't? > > > > I'm not sure how much sympathy to have for this situation. A PCIe UR > > > is fatal for the transaction and maybe even the device, but from the > > > overall system point of view, it *should* be a recoverable error and > > > we shouldn't panic. > > > > > > Errors like that should be reported via the normal AER or ACPI/APEI > > > mechanisms. It sounds like in this case, the platform has decided > > > these aren't enough and it is trying to force a reboot? If this is > > > "special" platform behavior, I'm not sure how much we need to cater > > > for it. > > > > Are these AER errors the type processed by the GHES code? > > My understanding from ACPI v6.3, sec 18.3.2, is that the Hardware > Error Source Table may contain Error Source Descriptors of types like: > > IA-32 Machine Check Exception > IA-32 Corrected Machine Check > IA-32 Non-Maskable Interrupt > PCIe Root Port AER > PCIe Device AER > Generic Hardware Error Source (GHES) > Hardware Error Notification > IA-32 Deferred Machine Check > > I would naively expect PCIe UR errors to be reported via one of the > PCIe Error Sources, not GHES, but maybe there's some reason to use > GHES. > > The kernel should already know how to deal with the PCIe AER errors, > but we'd have to add new device-specific code to handle things > reported via GHES, along the lines of what Shiju is doing here: > > https://lore.kernel.org/r/20200722104245.1060-1-shiju.j...@huawei.com > > > I'll note that RedHat runs their crash kernel with: hest_disable. > > So, the ghes code is disabled in the crash kernel. > > That would disable all the HEST error sources, including the PCIe AER > ones as well as GHES ones. If we turn off some of the normal error > handling mechanisms, I guess we have to expect that some errors won't > be handled correctly.
Hi, that's true, hest_disable is added by default to reduce memory usage in special cases. But even if I remove hest_disable and have GHES enabled, but the hanging issue still exists, from the iLO console log, it's still sending an NMI to kernel, and kernel hanged. The NMI won't hang the kernel for 100 percent, sometime it will just panic and reboot and sometimes it hangs. This behavior didn't change after/before enabled the GHES. Maybe this is a "special platform behavior". I'm also not 100 percent sure if/how we can cover this in a good way for now. I'll try to figure how the NMI actually hanged the kernel and see if it could be fixed in other ways. -- Best Regards, Kairui Song _______________________________________________ kexec mailing list kexec@lists.infradead.org http://lists.infradead.org/mailman/listinfo/kexec
