HI Milind
Thanks for your light speed reply,
In my grub entry I did't added "kgdbwait", still it is not booting up,
My grup entry is_
title Bhagwat Kernel
root (hd0,5)
kernel /vmlinuz-2.6.15-kgdb ro root=LABEL=/ rhgb quiet
initrd /initrd-2.6.15-kgdb.img
[EMAIL PROTECTED]/eth1 00:00:E2:78:ED:8D,@192.168.2.26/
console=ttyS0,115200
As target machine 192.168.2.117 is mapped to eth1 not to eth0.
With reference to your quick start document
http://kgdb.linsyssoft.com/downloads/kgdb-2/kgdbquickstart-2.4.pdf I have done
make bzImage and copied the kernel to target machine, it is not booting up, Do
I need to do $ make module then $ make module_install
Thanks
Bhagwat
-----Original Message-----
From: Milind Dumbare [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 05, 2008 12:27 PM
To: Bhagwat Masalkar; KGDB Mailing List
Subject: Re: how to chk dmesg on remote machine, as it is not booted up?
Hi Bhagwat,
In KGDBoE (KGDB over ethernet) we don't add "kgdbwait" on kernel command line
(grub entry) so the kgdb machine should not wait for connection from remote gdb
while booting and should boot like a normal machine. So when it boots up you
see the dmesg see if KGDBoE is configured properly and its up and running, and
then try connecting from remote gdb.
-Miline
On Thu, Jun 5, 2008 at 12:15 PM, Bhagwat <[EMAIL PROTECTED]<mailto:[EMAIL
PROTECTED]>> wrote:
Hi milind,
I have seen ur response at
http://www.mail-archive.com/[email protected]/msg00067.html
I am also facing same problem, like
I am trying to setup kgdb with ethernet. I have downloaded
2.6.15.5<http://2.6.15.5>
> kernel and 2.4 kgdb patch for 2.6.15.5<http://2.6.15.5> kernel release. I
> successfully
> applied the following patches
>
> core-lite.patch
> i386-lite.patch
> 8250.patch
> eth.patch
> core.patch
> i386.patch
> and configured with ethernet support for kgdb with make menuconfig.
> then i gave make bzImage command and placed both System.map and
> bzImage to the target machine's boot directory. Then I have made an
> entry in grub.conf file to be able to boot with newly copied bzImage
> and specified parameters as
> kgdboe = @192.168.0.1/<http://192.168.0.1/> ,
> @192.168.0.2/<http://192.168.0.2/>
>
> then I have started gdb at development machine by issuing the command
> gdb ./vmlinux.
>
> now at gdb prompt, i have given the command target remote
> udp:192.168.0.2:6443<http://192.168.0.2:6443>. At this stage, I am getting an
> error that "host
> is not reachable and ignoring packet error".
I have done target remote udp:192.168.0.1:6443<http://192.168.0.1:6443> also,
but no success getting same msg, like host is not reachable ignoring packet
error.
Also as you suggested, See "dmesg" output of kgdb machine for more help. look
for "kgdboe"
messages in it.
But on KGDB running machine, it is not booted up, and its waiting for
connection from host, how to chk dmesg.
Please share your experience.
Thanks
Bhagwat
________________________________
The information contained in this email and any attachments is confidential and
may be subject to copyright or other intellectual property protection. If you
are not the intended recipient, you are not authorized to use or disclose this
information, and we request that you notify us by reply mail or telephone and
delete the original message from your mail system.
--
Milind Dumbare
Sr. Systems Engg.
Linsyssoft Technologies.
________________________________
The information contained in this email and any attachments is confidential and
may be subject to copyright or other intellectual property protection. If you
are not the intended recipient, you are not authorized to use or disclose this
information, and we request that you notify us by reply mail or telephone and
delete the original message from your mail system.
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Kgdb-bugreport mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/kgdb-bugreport
