Hi,
My kernel version is 2.6.31, after rebuild it with kgbd, kgdboc etc enabled and
set extra boot agrs "......kgdboc=ttyS0, 115200 kgdbwait", then boot the
kernel, the kgdb will stop the booting and "wait for connection from remote
gdb.....", however, this message shows during late stage of kernel booting
other than early booting stage like the following:
/************************************************************************************/
Linux version 2.6.31-1.3 ([email protected]) (gcc version 4.2.0
20070124 (prerelease) - BRCM 11ts-20090508) #6 Mon Jul 19 0
Fetching vars from bootloader... found 7 vars.
Early serial console at MMIO 0x10406b00 (options '115200n8')
console [uart0] enabled
Options: sata=0 enet=1 emac_1=0 no_mdio=0 docsis=0 pci=0 smp=0 moca=0 usb=1
Probing system memory size... found 128 MB
CPU revision is: 00029041 (Broadcom BMIPS3300)
Determined physical RAM map:
memory: 08000000 @ 00000000 (usable)
bmem: adding 90 MB RESERVED region at 38 MB (0x05a00...@0x02600000)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00008000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00008000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: ubiroot bmem=...@38m kgdboc=ttyS0,115200 kgdbwait
ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
Memory: 30436k/131072k available (3660k kernel code, 100556k reserved, 752k
data, 172k init, 0k highmem)
NR_IRQS:128
Detected MIPS clock frequency: 185 MHz (92.571 MHz counter)
Calibrating delay loop... 184.32 BogoMIPS (lpj=92160)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. (NAND) .. 2001-2006 Red Hat, Inc.
fuse init (API version 7.12)
msgmni has been set to 59
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 21) is a 16550A
console handover: boot [uart0] -> real [ttyS0]
serial8250.0: ttyS1 at MMIO 0x10406b40 (irq = 65) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406b80 (irq = 66) is a 16550A
kgdb: Registered I/O driver kgdboc.
kgdb: Waiting for connection from remote gdb...
/************************************************************************************/
Could you tell me where the issue is and what need to be changed for let the
kgdb stop the booting in the early stage?
thanks in advance.
Hebert
------------------------------------------------------------------------------
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
Kgdb-bugreport mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/kgdb-bugreport
