Hi Anders,

(CC: +linux-arm-ker...@lists.infradead.org)

On 31/10/2018 12:13, Anders Roxell wrote:
I'm running an arm64 kernel in a qemu guest and I hit this
DEBUG_LOCKS_WARN_ON and this patch removes the warning. The
interrupts_enabled(reqs) should reflect the irq->enabled state of the
kgdb test process

(I know nothing about kgdb, please forgive the stupid questions:)

Where does this 'irq->enabled state of the kgdb test process' come from?
What happens if it takes an interrupt, then you single-step the interrupt handler? (How can any state in memory get updated...)


when it hit the breakpoint, and that should be the
same as the current->hardirqs_enabled flag

[   25.682116] kgdbts:RUN singlestep test 1000 iterations
[   25.695926] ------------[ cut here ]------------
[   25.696410] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
[   25.697407] WARNING: CPU: 0 PID: 1 at ../kernel/locking/lockdep.c:3761 
check_flags+0x64/0x198
[   25.698349] Modules linked in:
[   25.699144] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G                T 
4.19.0-next-20181030+ #6
[   25.699739] Hardware name: linux,dummy-virt (DT)
[   25.700359] pstate: 404003c5 (nZcv DAIF +PAN -UAO)
[   25.700901] pc : check_flags+0x64/0x198
[   25.701381] lr : check_flags+0x64/0x198

[   25.710104] Call trace:
[   25.710553]  check_flags+0x64/0x198
[   25.711023]  lock_acquire+0x60/0x248
[   25.711477]  call_step_hook+0x5c/0x190
[   25.711937]  single_step_handler+0x48/0xa0
[   25.712399]  do_debug_exception+0x104/0x160
[   25.712846]  el1_dbg+0x18/0xa8
[   25.713252]  el1_irq+0xa8/0x1c0
[   25.713709]  kgdbts_break_test+0x0/0x40
[   25.714171]  kgdbts_run_tests+0x2b0/0x430
[   25.714637]  configure_kgdbts+0x7c/0xb0
[   25.715110]  init_kgdbts+0x70/0xac
[   25.715551]  do_one_initcall+0x1fc/0x490
[   25.716010]  do_initcall_level+0x458/0x49c
[   25.716462]  do_initcalls+0x60/0xa4
[   25.716892]  do_basic_setup+0x3c/0x68
[   25.717343]  kernel_init_freeable+0x170/0x2b8
[   25.717860]  kernel_init+0x20/0x130
[   25.718302]  ret_from_fork+0x10/0x18
[   25.718712] irq event stamp: 266621
[   25.719209] hardirqs last  enabled at (266621): [<ffffff80081e935c>] 
do_debug_exception+0x13c/0x160
[   25.719949] hardirqs last disabled at (266620): [<ffffff8008215a58>] 
kgdb_roundup_cpus+0x30/0x38
[   25.720675] softirqs last  enabled at (266616): [<ffffff80081e9f24>] 
__do_softirq+0x4e4/0x52c
[   25.721374] softirqs last disabled at (266609): [<ffffff8008279694>] 
irq_exit+0xbc/0x128
[   25.722050] ---[ end trace ecb2b85abf3c30a2 ]---
[   25.722537] possible reason: unannotated irqs-off.
[   25.722960] irq event stamp: 266621

Rework code to drop the 'if (interrupts_enabled(regs))' before
trace_hardirqs_*() in function do_debug_exception().

We don't know why current->hardirqs_enabled and interrupts_enabled(regs)
don't match.

You took an IRQ from kgdbts_break_test(). This causes the CPU to mask interrupts, we tell trace_hardirqs_off() about this in the entry asm.

From arch/arm64/kernel/entry.S:
| el1_irq:
|       kernel_entry 1
|       enable_da_f
| #ifdef CONFIG_TRACE_IRQFLAGS
|       bl     trace_hardirqs_off
| #endif
|
|       irq_handler


Could you faddr2line 'el1_irq+0xa8/0x1c0'? I bet that is the 'enable_da_f' line which re-enables debug, just _before_ we update call trace_hardirqs_off.

The problem is debug exceptions can jump in this gap and see an inconsistent trace_hardirqs_off/regs state.


diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 7d9571f4ae3d..9afe5a7ba55b 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -819,11 +819,9 @@ asmlinkage int __exception do_debug_exception(unsigned 
long addr,
        int rv;
/*
-        * Tell lockdep we disabled irqs in entry.S. Do nothing if they were
-        * already disabled to preserve the last enabled/disabled addresses.
+        * Tell lockdep we disabled irqs in entry.S.
         */
-       if (interrupts_enabled(regs))
-               trace_hardirqs_off();
+       trace_hardirqs_off();

Taking a debug-exception from irq-unmasked code will cause IRQs to be disabled. This code updates trace_hardirqs_off().

But, taking a debug-exception from irq-masked code doesn't change anything. Making this trace_hardirqs_off() unconditional means you now overwrite the original location where irqs were masked.


Would making sure debug exceptions can't see current->hardirqs_enabled and interrupts_enabled(regs) as having different states fix this problem?

If so moving the 'enable_da_f' line in el1_irq below the #ifdef block should fix it.


Thanks,

James


_______________________________________________
Kgdb-bugreport mailing list
Kgdb-bugreport@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/kgdb-bugreport

Reply via email to