On Sat, Mar 23, 2024 at 09:41:41AM +0800, liu....@h3c.com wrote: > From: LiuYe <liu....@h3c.com> > > Currently, if CONFIG_KDB_KEYBOARD is enabled, then kgdboc will > attempt to use schedule_work() to provoke a keyboard reset when > transitioning out of the debugger and back to normal operation. > This can cause deadlock because schedule_work() is not NMI-safe. > > The stack trace below shows an example of the problem. In this > case the master cpu is not running from NMI but it has parked > the slave CPUs using an NMI and the parked CPUs is holding > spinlocks needed by schedule_work(). > > example: > BUG: spinlock lockup suspected on CPU#0, namex/10450 > lock: 0xffff881ffe823980, .magic: dead4ead, .owner: namexx/21888, > .owner_cpu: 1 > ffff881741d00000 ffff881741c01000 0000000000000000 0000000000000000 > ffff881740f58e78 ffff881741cffdd0 ffffffff8147a7fc ffff881740f58f20 > Call Trace: > [<ffffffff81479e6d>] ? __schedule+0x16d/0xac0 > [<ffffffff8147a7fc>] ? schedule+0x3c/0x90 > [<ffffffff8147e71a>] ? schedule_hrtimeout_range_clock+0x10a/0x120 > [<ffffffff8147d22e>] ? mutex_unlock+0xe/0x10 > [<ffffffff811c839b>] ? ep_scan_ready_list+0x1db/0x1e0 > [<ffffffff8147e743>] ? schedule_hrtimeout_range+0x13/0x20 > [<ffffffff811c864a>] ? ep_poll+0x27a/0x3b0 > [<ffffffff8108c540>] ? wake_up_q+0x70/0x70 > [<ffffffff811c99a8>] ? SyS_epoll_wait+0xb8/0xd0 > [<ffffffff8147f296>] ? entry_SYSCALL_64_fastpath+0x12/0x75 > CPU: 0 PID: 10450 Comm: namex Tainted: G O 4.4.65 #1 > Hardware name: Insyde Purley/Type2 - Board Product Name1, BIOS 05.21.51.0036 > 07/19/2019 > 0000000000000000 ffff881ffe813c10 ffffffff8124e883 ffff881741c01000 > ffff881ffe823980 ffff881ffe813c38 ffffffff810a7f7f ffff881ffe823980 > 000000007d2b7cd0 0000000000000001 ffff881ffe813c68 ffffffff810a80e0 > Call Trace: > <#DB> [<ffffffff8124e883>] dump_stack+0x85/0xc2 > [<ffffffff810a7f7f>] spin_dump+0x7f/0x100 > [<ffffffff810a80e0>] do_raw_spin_lock+0xa0/0x150 > [<ffffffff8147eb55>] _raw_spin_lock+0x15/0x20 > [<ffffffff8108c256>] try_to_wake_up+0x176/0x3d0 > [<ffffffff8108c4c5>] wake_up_process+0x15/0x20 > [<ffffffff8107b371>] insert_work+0x81/0xc0 > [<ffffffff8107b4e5>] __queue_work+0x135/0x390 > [<ffffffff8107b786>] queue_work_on+0x46/0x90 > [<ffffffff81313d28>] kgdboc_post_exp_handler+0x48/0x70 > [<ffffffff810ed488>] kgdb_cpu_enter+0x598/0x610 > [<ffffffff810ed6e2>] kgdb_handle_exception+0xf2/0x1f0 > [<ffffffff81054e21>] __kgdb_notify+0x71/0xd0 > [<ffffffff81054eb5>] kgdb_notify+0x35/0x70 > [<ffffffff81082e6a>] notifier_call_chain+0x4a/0x70 > [<ffffffff8108304d>] notify_die+0x3d/0x50 > [<ffffffff81017219>] do_int3+0x89/0x120 > [<ffffffff81480fb4>] int3+0x44/0x80 > > Just need to postpone schedule_work to the slave CPU exiting the NMI context. > > irq_work will only respond to handle schedule_work after exiting the current > interrupt context. > > When the master CPU exits the interrupt context, other CPUs will naturally > exit the NMI context, so there will be no deadlock. > > It is the call to input_register_handler() that forces us not to do the work > from irq_work's hardirq callback. > > Therefore schedule another work in the irq_work and not do the job directly.
This looks like it was copy and pasted from the e-mail thread without any editing to make it make any sense. It not even formatted correctly (where are the line breaks?). How about: We fix the problem by using irq_work to call schedule_work() instead of calling it directly. irq_work is an NMI-safe deferred work framework that performs the requested work from a hardirq context (usually an IPI but it can be timer interrupt on some architectures). Note that we still need to a workqueue since we cannot resync the keyboard state from the hardirq context provided by irq_work. That must be done from task context for the calls into the input subystem. Hence we must defer the work twice. First to safely switch from the debug trap (NMI-like context) to hardirq and then, secondly, to get from hardirq to the system workqueue. Daniel. _______________________________________________ Kgdb-bugreport mailing list Kgdb-bugreport@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kgdb-bugreport