I believe your boost build issues will change shortly. After the stable release, the dependency building stuff is going to be completely changed.
Adam Wolf On Mar 19, 2015 11:13 AM, "Bob Gustafson" <bob...@rcn.com> wrote: > Yes, I downloaded it (5525) and it ran fine on my Mac - thanks much. I > checked all of the crash sites - and no crashes on your build. > > I will have to search for unpatched Boost files deep in my computer before > I do another build. > > Thanks again Adam > > Bob G > > On 03/18/2015 09:11 PM, Adam Wolf wrote: > > Hi folks, > > After clearing some files off that system, the build completed without > issue. > > Bob, I'll see about making a build for you with trackpad support. I > have to test the new footprint GUI thing first. > > Adam Wolf > > On Wed, Mar 18, 2015 at 7:40 PM, Adam Wolf <adamw...@feelslikeburning.com> > wrote: > >> I do not know about boost issues. I do not have them. They don't occur >> on my builds, right? >> >> The only build failures since March 3rd have been due to disk space on >> one of my build boxes, two days ago. I deleted some files, and restarted >> the job. We'll see if that fixes it. >> >> Adam Wolf >> Cofounder and Engineer >> Wayne and Layne, LLC >> >> On Wed, Mar 18, 2015 at 7:28 PM, Bob Gustafson <bob...@rcn.com> wrote: >> >>> Hi Adam >>> >>> I was able to compile and execute kicad using your build files, but I >>> have some questions >>> >>> Application: kicad >>> Version: (2015-03-17 BZR 5524)-product Release build >>> wxWidgets: Version 3.0.2 (debug,UTF-8,compiler with C++ ABI 1002,GCC >>> 4.2.1,STL containers,compatible with 2.8) >>> Platform: Mac OS X (Darwin 14.1.0 x86_64), 64 bit, Little endian, wxMac >>> Boost version: 1.57.0 >>> USE_WX_GRAPHICS_CONTEXT=OFF >>> USE_WX_OVERLAY=ON >>> KICAD_SCRIPTING=ON >>> KICAD_SCRIPTING_MODULES=ON >>> KICAD_SCRIPTING_WXPYTHON=ON >>> USE_FP_LIB_TABLE=HARD_CODED_ON >>> BUILD_GITHUB_PLUGIN=ON >>> KICAD_USE_WEBKIT=OFF >>> >>> >>> The odd thing about this is that it reports using Boost 1.57.0, but not >>> the 1.54.0 which it downloaded, patched (successfully) and built. >>> >>> I probably have a few boost libraries lying around on my disk. I think >>> even brew downloaded a bottle with Boost 1.57.0. If the label above is >>> accessed by a utility, perhaps it picked up the wrong label. >>> >>> ------ >>> >>> I was able to run the main KiCad and eeSchema, but when I clicked on the >>> icons for pcbnew (I clicked on both the main page icon and the 2nd from >>> right at the top on eeSchema - same results), it crashed. >>> >>> >>> Crash of pcbnew when opened - console output >>> >>> Bobs-MacBook-Air:bin bobgus$ kicad.app/Contents/MacOS/kicad >>> Traceback (most recent call last): >>> File "/usr/local/lib/python2.7/site-packages/wx-3.0-osx_cocoa/wx/ >>> __init__.py", line 45, in <module> >>> from wx._core import * >>> File "/usr/local/lib/python2.7/site-packages/wx-3.0-osx_cocoa/wx/ >>> _core.py", line 4, in <module> >>> import _core_ >>> ImportError: dlopen(/usr/local/lib/python2.7/site-packages/wx-3.0- >>> osx_cocoa/wx/_core_.so, 2): Symbol not found: >>> __ZTV20wxwxMenuItemListNode >>> Referenced from: /usr/local/lib/python2.7/site-packages/wx-3.0- >>> osx_cocoa/wx/_core_.so >>> Expected in: /usr/local/lib/libwx_osx_cocoau_core-3.0.dylib >>> in /usr/local/lib/python2.7/site-packages/wx-3.0-osx_cocoa/wx/ >>> _core_.so >>> Segmentation fault: 11 >>> Bobs-MacBook-Air:bin bobgus$ >>> >>> Some excerpts from the build log files - may not have any bearing on >>> the problem though. Does seem to indicate that boost 1.54.0 is being used. >>> >>> 990: >>> src='/Users/bobgus/KiCad-adam/kicad-mac-packaging-python/ >>> kicad/.downloads-by-cmake/boost_1_54_0.tar.bz2' >>> 991: >>> dst='/Users/bobgus/KiCad-adam/kicad-mac-packaging-python/ >>> kicad/.downloads-by-cmake/boost_1_54_0/src/boost' >>> 997:[ 32%] [ 32%] Performing update step for 'boost' >>> 998:creating 'boost scratch repo' specifically for boost to track >>> boost patches >>> 999:[ 32%] adding pristine boost files to 'boost scratch repo' >>> 1000:[ 32%] committing pristine boost files to 'boost scratch repo' >>> 1001:[ 32%] Performing patch step for 'boost' >>> 1002:patching file boost/polygon/detail/minkowski.hpp >>> 1003:patching file boost/cstdint.hpp >>> 1010:patching file boost/asio/ssl/impl/context.ipp >>> 1018:patching file boost/detail/interlocked.hpp >>> 1039:[ 32%] Performing configure step for 'boost' >>> 1057: >>> http://www.boost.org/more/getting_started/unix- >>> variants.html >>> 1060: >>> http://www.boost.org/boost-build2/doc/html/index.html >>> 1062:[ 32%] Performing build step for 'boost' >>> >>> The copy/paste below shows some possible problems. >>> >>> 1161:In file included from ./boost/filesystem/detail/ >>> utf8_codecvt_facet.hpp:18: >>> 1162:./boost/detail/utf8_codecvt_facet.hpp:171:17: warning: >>> 'boost::filesystem::detail::utf8_codecvt_facet::do_length' hides >>> overloaded virtual function [-Woverloaded-virtual] >>> 1180:In file included from ./boost/detail/utf8_codecvt_facet.ipp:13: >>> 1181:./boost/detail/utf8_codecvt_facet.hpp:171:17: warning: >>> 'boost::filesystem::detail::utf8_codecvt_facet::do_length' hides >>> overloaded virtual function [-Woverloaded-virtual] >>> 1189:darwin.archive bin.v2/libs/filesystem/build/darwin-4.2.1/ >>> release/link-static/threading-multi/libboost_filesystem.a >>> >>> The beginning of the actual crash report is shown below: >>> >>> Process: kicad [92019]\ >>> Path: /Users/USER/*/kicad.app/Contents/MacOS/kicad >>> Identifier: org.kicad-eda.kicad >>> Version: ??? (???) >>> Code Type: X86-64 (Native) >>> Parent Process: bash [46543] >>> Responsible: Terminal [458] >>> User ID: 501 >>> >>> Date/Time: 2015-03-17 22:45:30.130 -0500 >>> OS Version: Mac OS X 10.10.2 (14C1510) >>> Report Version: 11 >>> Anonymous UUID: 5EC3DCC9-7506-88B6-B795-E06635F030BC >>> >>> Sleep/Wake UUID: D3B1E849-EB3E-4A40-AA14-0AE38FED6F59 >>> >>> Time Awake Since Boot: 620000 seconds >>> Time Since Wake: 94000 seconds >>> >>> Crashed Thread: 0 Dispatch queue: com.apple.main-thread >>> >>> Exception Type: EXC_BAD_ACCESS (SIGSEGV) >>> Exception Codes: KERN_INVALID_ADDRESS at 0x0000000040490fe4 >>> >>> VM Regions Near 0x40490fe4: >>> --> >>> __TEXT 0000000103cec000-0000000103daa000 [ 760K] >>> r-x/rwx SM=COW /Users/USER/*/kicad.app/Contents/MacOS/kicad >>> >>> Thread 0 Crashed:: Dispatch queue: com.apple.main-thread >>> 0 _pcbnew.kiface 0x000000010ccdefe0 >>> KIGFX::VIEW::SetGAL(KIGFX::GAL*) + 112 >>> 1 _pcbnew.kiface 0x000000010cd33995 >>> EDA_DRAW_PANEL_GAL::EDA_DRAW_PANEL_GAL(wxWindow*, int, wxPoint const&, >>> wxSize const&, EDA_DRAW_PANEL_GAL::GalType) + 437 >>> 2 _pcbnew.kiface 0x000000010c7adee1 >>> PCB_DRAW_PANEL_GAL::PCB_DRAW_PANEL_GAL(wxWindow*, int, wxPoint const&, >>> wxSize const&, EDA_DRAW_PANEL_GAL::GalType) + 33 >>> 3 _pcbnew.kiface 0x000000010c4f94a6 >>> PCB_EDIT_FRAME::PCB_EDIT_FRAME(KIWAY*, wxWindow*) + 1190 >>> 4 _pcbnew.kiface 0x000000010c4d7d44 >>> PCB::IFACE::CreateWindow(wxWindow*, int, KIWAY*, int) + 116 >>> 5 org.kicad-eda.kicad 0x0000000103d5262b >>> KIWAY::Player(FRAME_T, bool) + 363 >>> 6 _eeschema.kiface 0x000000010bbbffe1 >>> SCH_EDIT_FRAME::OnOpenPcbnew(wxCommandEvent&) + 785 >>> 7 libwx_baseu-3.0.0.dylib 0x0000000104938e20 >>> wxEventHashTable::HandleEvent(wxEvent&, wxEvtHandler*) + 240 >>> 8 libwx_baseu-3.0.0.dylib 0x000000010493a2ab >>> wxEvtHandler::ProcessEvent(wxEvent&) + 283 >>> 9 _eeschema.kiface 0x000000010bc2ba8c >>> EDA_BASE_FRAME::ProcessEvent(wxEvent&) + 28 >>> 10 libwx_baseu-3.0.0.dylib 0x000000010493a3a4 >>> wxEvtHandler::ProcessEventLocally(wxEvent&) + 164 >>> 11 libwx_baseu-3.0.0.dylib 0x000000010493a24e >>> wxEvtHandler::ProcessEvent(wxEvent&) + 190 >>> 12 libwx_osx_cocoau_core-3.0.0.dylib 0x00000001043772b4 >>> wxWindowBase::TryAfter(wxEvent&) + 228 >>> 13 libwx_baseu-3.0.0.dylib 0x000000010493a2d4 >>> wxEvtHandler::ProcessEvent(wxEvent&) + 324 >>> >>> I see your nightlies have been delayed - are you also having build >>> problems? >>> >>> Hope this helps >>> >>> Bob G >>> >>> >> > >
_______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : kicad-developers@lists.launchpad.net Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
