I found another schematic with the same problem. The changed zener diode is not getting detected or at least for me it doesn't show up in the list of components to rescue. Perhaps there is a bug in the component comparison code. It may be the LIB_PIN comparison is the issue. You should be able to create a schematic with the old zener diode component and save it then update you component libraries to the latest and greatest and open the schematic. If the rescue dialog doesn't show up, then you know that the comparison failed and zener diode in your schematic will be rotated 180 degrees.
On 5/13/2015 3:22 PM, Wayne Stambaugh wrote: > I'm not sure why swapped pins in the system libraries would be an issue > since the cached components should product the correct schematic. > Assuming the rescue library is properly fetching the components from the > cache library, I can't see how any changes in the system libraries would > cause this. Unfortunately, did not make a back up of the cache library > of the schematic I rescued so there is no way to get back that > information. I'll see if I have another project that causes the issue. > > On 5/13/2015 11:52 AM, Chris Pavlina wrote: >> I don't use the KiCad libraries usually, so I'm unaware - were the pin >> numbers swapped? If that's the case, I'm not sure of a way to handle >> that gracefully, as from the software's perspective, pin 1 is pin 1 is >> pin 1 - the fact that the cathode band is drawn elsewhere obviously >> doesn't factor into that, it's just a graphical change. >> >> Any ideas on how I could handle that? >> >> -- >> Chris >> >> >> On Wed, May 13, 2015 at 11:45:38AM -0400, Wayne Stambaugh wrote: >>> This is altogether possible as I have recently installed the latest >>> library changes. >>> >>> On 5/13/2015 11:37 AM, Maciej Sumiński wrote: >>>> Is it possible the problem is related to the recent diode pin swapping >>>> in KiCad library? >>>> >>>> Regards, >>>> Orson >>>> >>>> On 05/13/2015 05:35 PM, Chris Pavlina wrote: >>>>> Hi Wayne, >>>>> >>>>> That's interesting. I can't really imagine what would cause that, and I >>>>> haven't seen anything like that - I've tested it on many projects that >>>>> should have stirred that bug up if it existed. Any chance you can share >>>>> with me the problem project? >>>>> >>>>> Chris >>>>> >>>>> >>>>> On Wed, May 13, 2015 at 11:01:17AM -0400, Wayne Stambaugh wrote: >>>>>> Chris, >>>>>> >>>>>> I just tested this and I like the changes. I believe I found a >>>>>> bug. I >>>>>> just rescued an old project and noticed all of the zener diodes were >>>>>> oriented 180 degrees from the unrescued version. When you get a >>>>>> chance, >>>>>> would you please verify the component orientation against the rescued >>>>>> library is correct. I'll commit this patch. If you find a bug, >>>>>> please >>>>>> apply the patch against this patch. >>>>>> >>>>>> Thanks, >>>>>> >>>>>> Wayne >>>>>> >>>>>> On 5/4/2015 1:30 PM, Chris Pavlina wrote: >>>>>>> I've got two changes here - they're a bit inadvertently >>>>>>> intertwined, so >>>>>>> I left them as one patch, otherwise one would depend on the other >>>>>>> anyway. Let me know if you want me to discard half. >>>>>>> >>>>>>> 1. Remove the summary dialog from lib-cache-rescue. I originally >>>>>>> created >>>>>>> it so the user would know what the new names of the components >>>>>>> were; I >>>>>>> compensated by changing the main dialog to display the suffix that >>>>>>> will >>>>>>> be added to the parts. >>>>>>> >>>>>>> 2. Minor bugfix: If no parts are rescued, an empty rescue library >>>>>>> shouldn't be written. >>>>>>> >>>>>>> -- >>>>>>> Chris >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Mailing list: https://launchpad.net/~kicad-developers >>>>>>> Post to : kicad-developers@lists.launchpad.net >>>>>>> Unsubscribe : https://launchpad.net/~kicad-developers >>>>>>> More help : https://help.launchpad.net/ListHelp >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Mailing list: https://launchpad.net/~kicad-developers >>>>>> Post to : kicad-developers@lists.launchpad.net >>>>>> Unsubscribe : https://launchpad.net/~kicad-developers >>>>>> More help : https://help.launchpad.net/ListHelp >>>>> >>>>> _______________________________________________ >>>>> Mailing list: https://launchpad.net/~kicad-developers >>>>> Post to : kicad-developers@lists.launchpad.net >>>>> Unsubscribe : https://launchpad.net/~kicad-developers >>>>> More help : https://help.launchpad.net/ListHelp >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Mailing list: https://launchpad.net/~kicad-developers >>>> Post to : kicad-developers@lists.launchpad.net >>>> Unsubscribe : https://launchpad.net/~kicad-developers >>>> More help : https://help.launchpad.net/ListHelp >>>> >>> >>> _______________________________________________ >>> Mailing list: https://launchpad.net/~kicad-developers >>> Post to : kicad-developers@lists.launchpad.net >>> Unsubscribe : https://launchpad.net/~kicad-developers >>> More help : https://help.launchpad.net/ListHelp >> >> _______________________________________________ >> Mailing list: https://launchpad.net/~kicad-developers >> Post to : kicad-developers@lists.launchpad.net >> Unsubscribe : https://launchpad.net/~kicad-developers >> More help : https://help.launchpad.net/ListHelp _______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : kicad-developers@lists.launchpad.net Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp