Hi Mark, That’s 6 change-lists too early for the fix. You need at least d2cd4de280353b02ab66dab8e22e8da88415dc13.
Cheers, Jeff. > On 4 Jun 2020, at 10:13, mdoes...@xs4all.nl wrote: > > Hello Jeff, > > I just tried version 9ff09aa784551264e89350368f61ed6b35266f7a, but > it still fails. I tells me that it requires 1.3mm clearance, but both > the hole and the track are in the "Net-(C1-Pad1)" netclass, which should > only require 0.25mm. The plane clearances are as expected. > > With this version I can fix the problem by changing the drc file to > remove the default clearance of the netclass. So what I have now is: > > -------------------------------------------------------------------------------- > (selector (match_netclass "Net-(C1-Pad1)") (rule "1.3mm")) # the "default" > rule > (selector (match_netclass "Net-(C1-Pad1)") (match_netclass "Net-(C1-Pad1)") > (rule "Default")) > -------------------------------------------------------------------------------- > > If the "default" rule is removed everything is OK. Now obviously I can > do this, but it has consequences for the number of drc-rules I need. For > the big design I can constrain with 451 lines when I can use a default, > if that's not possible I need 7437 lines. > > There is also an overflow at some point. Two pads, one at (364, 218.5) > and the other at (124.45, 50.4) are only 4.351mm apart according to the > DRC check. I'll create a testcase if you want me to. > > regards, > > Mark. > > Jeff Young <j...@rokeby.ie> wrote: > > Hi Mark, > > The hole clearance logic never got updated to pass both items (the > track and the hole). It should work now. > > Cheers, > Jeff. _______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : kicad-developers@lists.launchpad.net Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
