hi, --- In kicad-users@yahoogroups.com, "Geert Vancompernolle" <[EMAIL PROTECTED]> wrote: > > Sorry, > > Was a bit a silly question from my side. > > First off, I don't have "implemented" the FoxBoard myself, so I > should never represent the connectors of the FoxBoard in my > schematics. > > I should only represent the in/outputs I'm using from the > FoxBoard.
You can represent them all, but you may specify to KICAD that they are 'Not Connected', placing the 'blue cross' on each unused pin. > > Using a connector like you proposed, is OK. I can for the > time being tell KiCad most of the pins are not used yet by > assigning them a "not connected" label. > Be aware of the spelling of the connector pins. For convenience, they should be : +------------- |2 4 6 8... |1 3 5 7... +------------- and not : +------------- |B1 B2 B3 B4 ... |A1 A2 A3 A4 +------------- You can also download the symbol at : "http://kicad.rohrbacher.net/share/FOX_Board_LX.lib"; Regards, Charles. > Best rgds, > > --Geert
