dave a écrit : > jean-pierre charras wrote: > > >> dave a écrit : >> >> >>> Dan Andersson wrote: >>> >>> >>> >>>> On Sunday 25 November 2007 07:15:05 dave wrote: >>>> >>>> >>>> >>>> >>>>> what am i doing wrong? >>>>> >>>>> i drew up a schematic and made a netlist and started to layout the board. >>>>> i >>>>> found an error and when i went back to correct it and then make a new >>>>> netlist the program changed several part numbers.. so then it gave me an >>>>> error when it read the new netlist in the pcb layout program. >>>>> >>>>> it is driving me nuts!!! >>>>> >>>>> am i doing something wrong or is there a problem with the program? >>>>> >>>>> >>>>> thanks for the help >>>>> >>>>> dave. >>>>> >>>>> >>>> The pcb layout does not replace or change modules as default, you need to >>>> tick >>>> the correct box for that in the net list read window. >>>> >>>> //Dan >>>> >>>> >>> yes. this i understand. the problem is that in the eeschema program when i >>> make changes and >>> a make new netlist several part numbers ie: U12, U13, U14 are changed to >>> U055, U056, U057 in the >>> eeschema drawing and in the net list and then in the pcb drawing and that >>> causes the traces that >>> were on the old parts to have no connections? >>> >>> something is wrong somewhere, but is it something i am doing or is there a >>> bug in the program? >>> >>> >> When eeschema renums components like U055, U056, U057 ... this is >> because these components are flagged as "power symbols" >> Only power symbols (like VCC, GND ...) must be flagged "power >> component" because they are not really "components", they are special >> symbols >> >> > > where are the power symbols on the component. it is something that i put > there. > i don't think so. i did not have a reason as they are just more of the > component on the sheet. > > if they are marked how do i get rid of the mark? > > In Libedit, "edit component properties" dialog, uncheck "power symbol" option
-- Jean-Pierre CHARRAS Maître de conférences Directeur d'études 2ieme année. Génie Electrique et Informatique Industrielle 2 Institut Universitaire de Technologie 1 de Grenoble BP 67, 38402 St Martin d'Heres Cedex Recherche : Grenoble Image Parole Signal Automatique (GIPSA - INPG) 46, Avenue Félix Viallet 38031 Grenoble Cedex
