Yesterday I found 2 bugs related to this: 1) in the "edit pin" window there is an option "[ ] Common to all elements" (may not be the exact wording, I am retranslating). This option is *off* but the pin is used in all elements. *Workaround*: set it to ON, press "Ok", edit the pin again and set it to OFF. Then it works as expected.
2) if I edit a component like 74HC14, in the library there are 2 connections to VCC and GND. There is nowhere to edit or delete them. *Workaround*: edit the file manualy Please, anyone, tell me if there is a better way of doing it that I was unable to find, or if theis is a really a bug Thanks, Alain sroux93 escreveu: > OK, i think i understand now. > > Thanks. > > But what about ground and power inputs ? > Must i make them appeared or not ? (invisible option ?) > > for example, for a audio filter or an ampli op., there is +Vcc - Vcc. > thses pins must be drawn for each parts or only the first one ? > > thanks > > > > --- In kicad-users@yahoogroups.com, "rohchar" <[EMAIL PROTECTED]> wrote: >> Hi, >> >> using a quad nand 74hc00 per ex., you have one component with >> 4 gates. Adding an 74hc00, you always get the first gate (pins 1, >> 2 & 3). So, you need to select which unit you want to use >> (Edite Composant => Unite => Unit 1, 2, 3 or 4). >> >> When you create a new component, you have to specify the number >> of parts or units. Default is 1. >> >> You can also use this feature to split a big component. >> You can see here a xc2v3000 fpga (one part) and a xc2v3000 with >> 9 parts : >> kicad.rohrbacher.net/temp >> >> regards, >> Charles. >> >> --- In kicad-users@yahoogroups.com, "sroux93" <sroux93@> wrote: >>> Someone can explain to me what are component with different parts >>> (eeschema program --> when you create a new component from a >>> existing one, in the properties, you can select number of > parts... >>> but but means this function ???) >>> >>> I am french if you want to answer in french. And i read english >>> >>> Thanks >>> >