Thanks. If comparing the Samsung 2442 chip pin distance of 0.8 millimeter, creating a module in KICAD would be doable. (http://www.opatnet.cz/elektronika/datasheet/U/um_s3c2442b_rev12.pdf)
Here are the other components that are used in the FreeRunner: http://wiki.openmoko.org/wiki/Neo_FreeRunner_GTA02_Hardware Especially the flash memory seems not clear to me (the fbga pin diameter of 0.0138 inch (b) and distance of 0.0295 inch (e) as of http://www.numonyx.com/Documents/Datasheets/M58WRxxxKTB.pdf The other components must be reviewed too, but this seems to be a house mark of package density :-) So I ask especially for designs using such fbga parts. Lothar Am 20.04.2009 um 18:56 schrieb Dave - WB6DHW: > > > Lothar: > I use KICAD to design all of my boards. They vary from DIP parts > down to fine pitch (.020" pitch) parts. A PDF of the schematic and > board layout for each of my boards is available on my website. > > Dave - WB6DHW > <http://wb6dhw.com> > > Lothar Behrens wrote: > > Hi, > > > > is there any resource for success stories about using KICAD? > > > > Not only what company but also what circuit / application and what > > package density / types used. > > I am asking again, because I would wish to see some projects about > > targeting mobile phone / smart phone > > or PDA like complexity. (Especially those parts used in OpenMoko > > 1973 / FreeRunner) > > > > Thanks > > > > Lothar > > > > -- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de > > Lothar Behrens > > Heinrich-Scheufelen-Platz 2 > > 73252 Lenningen > > > > > > -- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de Lothar Behrens Heinrich-Scheufelen-Platz 2 73252 Lenningen ------------------------------------ Please read the Kicad FAQ in the group files section before posting your question. Please post your bug reports here. They will be picked up by the creator of Kicad. Please visit http://www.kicadlib.org for details of how to contribute your symbols/modules to the kicad library. For building Kicad from source and other development questions visit the kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/kicad-users/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/kicad-users/join (Yahoo! ID required) <*> To change settings via email: mailto:kicad-users-dig...@yahoogroups.com mailto:kicad-users-fullfeatu...@yahoogroups.com <*> To unsubscribe from this group, send an email to: kicad-users-unsubscr...@yahoogroups.com <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
