wdoe999 a écrit : > > > I don't know if I'm doing something wrong, but... > > I created 3 boards that have one or more vias on each. If I create a > drill file for each board, the drill file does contain all of the via > drill holes for that board. I then put the 3 boards onto one panel and > then created a drill file. In the Drill-Files- Generation dialogue > box, under the Holes-Count section, it clearly says that there are 7 > Through-Vias. However, the resulting drill file only has one via in > it. Curiously, it is the one via on the leftmost board. It seems to be > missing the vias from the other boards. There's no problem with any of > the other drill holes. The plotting for the panel is OK as well. >
Please, can you send me yours PCB files ? (to jean-pierre.char...@gipsa-lab.inpg.fr) -- Jean-Pierre CHARRAS Maître de conférences Directeur d'études 2ieme année. Génie Electrique et Informatique Industrielle 2 Institut Universitaire de Technologie 1 de Grenoble BP 67, 38402 St Martin d'Heres Cedex Recherche : Grenoble Image Parole Signal Automatique (GIPSA - INPG) Grenoble France