Hi Robert! You can specify custom track widths in the global design rules, after you made it, you can select them from the drop down list.
BR: András 2010/4/6 Robert <birmingham_spi...@gmx.net> > > > For power connections I generally use wider tracks than signal > connections. Where the power track is connected to a fine pitch > component the track needs to be narrowed, but that's OK because the > narrow section will be short. The latest version of kicad auto-selects > the track width based on the net class, but that makes it impossible to > connect (for example) the Vcc pin(s) on a fine pitch component to the > rest of the Vcc net, which of course will be a "Power" net class with a > wide track width. > > I thought perhaps I could override the width using the track width drop > list, but I can't as there is only one width listed. Also I can't > override the auto-selected net class and pick one with a narrower width. > Finally I can't use "Select Track Width" from the context menu > because it doesn't allow me to select a narrower track width. > > I can't see how this arrangement can possibly work with modern > components, so I must be doing something wrong. How do I override the > auto-selected track width? > > Regards, > > Robert. > > > > > No virus found in this outgoing message. > Checked by AVG - www.avg.com > Version: 9.0.800 / Virus Database: 271.1.1/2794 - Release Date: 04/06/10 > 07:32:00 > >
