--- In kicad-users@yahoogroups.com, "strangdaniel" <hi...@...> wrote:
>
> I am working very hard on transfering my library and schematic from Eagle and
> have finally had a bit more luck today. I am indeed using the above
> mentioned ULP file. There still seem to be a couple of problems.
>
> 1. Kicad gags on ICs with more than one part for some reason and aborts
> drawing the rest of the schematic.
Something missing in the ULF translation script. Kicad, EEschema
can handle mult-part symbols. I'm not a big Eagle user but...Can
you attach a simple Eagle example?
-Frank
>
> 2. The components do not arrive in the correct orientation.
Same as 1)
>
> 3. I had to change a line in the schematic ULP because it was changing "/" to
> "_" in the names of the components.
A hierarchial schematic?
>
> I would appreciate it if somebody could help me with these problems.
>
> --- In kicad-users@yahoogroups.com, "Daniel Strang" <hippo@> wrote:
> >
> > The schematic comes over without symbols or nets. So far we have been
> > unsuccessful in transferring a net file.
> >
> > -------Original Message-------
> >
> > From: Andy Eskelson
> > Date: 6-4-2010 11:55:42
> > To: kicad-users@yahoogroups.com
> > Subject: Re: [kicad-users] Convert from Eagle to Kicad
> >
> >
> > Have you found this script:
> >
> > http://www.cadsoft.de/cgi-bin/download
> > pl?page=/home/cadsoft/html_public/download.htm.en&dir=eagle/userfiles/ulp
> >
> > eagle2kicad_sch.ulp ?
> >
> > I don't know if it's any good, I don't use eagle .
> >
> > Andy
> >
> > On Sat, 3 Apr 2010 14:27:01 +0200 (West-Europa (zomertijd))
> > "Daniel Strang" <hippo@> wrote:
> >
> > > To Whom It May Concern:
> > >
> > > I have been forced to switch from Eagle to Kicad because of the limited
> > > board space allowed. It is my greatest hope that it will not be necessary
> > > to redo all of my schematic files. However, I have tried exhaustively all
> > > the ULP files etc. which I could find on the Internet and nothings seems
> > to
> > > work. This includes files which supposedly convert net files and schematic
> > > files. Can somebody please help me?
> > >
> > > Sincerely,
> > > Daniel
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Please read the Kicad FAQ in the group files section before posting your
> > question.
> > > Please post your bug reports here. They will be picked up by the creator
> > of Kicad.
> > > Please visit http://www.kicadlib.org for details of how to contribute your
> > symbols/modules to the kicad library.
> > > For building Kicad from source and other development questions visit the
> > kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups
> > Links
> > >
> > >
> > >
> >
>
