On Sat, Sep 5, 2009 at 9:53 PM, edwin - <[email protected]> wrote: > > Dh, > Rekan-rekan mau tanya nih, bagaimana caranya supaya kita tahu bahwa > hardware laptop kita terdeteksi sempurna oleh ubuntu? > Adakah aplikasi / command line utk mengetahuinya? > Mohon informasinya. > > setahu saya ada command-nya..namanya *hwinfo* coba install dulu *hwinfo*
$ *sudo apt-get install hwinfo *-- $ *hwinfo –short* cpu: Intel(R) Pentium(R) 4 CPU 2.40GHz, 2400 MHz keyboard: /dev/input/event1 AT Translated Set 2 keyboard mouse: /dev/input/mice Apple Macintosh mouse button emulation /dev/input/mice PS/2 Mouse /dev/input/mice AlpsPS/2 ALPS GlidePoint graphics card: CLEVO/KAPOK SiS 660 sound: CLEVO/KAPOK AC’97 Sound Controller storage: Floppy disk controller CLEVO/KAPOK 5513 [IDE] network: eth0 CLEVO/KAPOK RTL-8139/8139C/8139C+ modem: /dev/ttySL0 CLEVO/KAPOK AC’97 Modem Controller network interface: lo Loopback network interface eth0 Ethernet network interface disk: /dev/sda SAMSUNG MP0402H /dev/sdb GENERIC USB Storage-SMC /dev/sdc GENERIC USB Storage-CFC /dev/sdd GENERIC USB Storage-MMC /dev/sde GENERIC USB Storage-MSC partition: /dev/sda1 Partition /dev/sda2 Partition /dev/sda3 Partition /dev/sda4 Partition /dev/sda5 Partition cdrom: /dev/sr0 TSSTcorp CDRW/DVD TSL462D usb controller: CLEVO/KAPOK USB 1.0 Controller CLEVO/KAPOK USB 1.0 Controller CLEVO/KAPOK USB 1.0 Controller CLEVO/KAPOK USB 2.0 Controller bios: BIOS bridge: CLEVO/KAPOK 661FX/M661FX/M661MX Host Silicon Integrated SiS AGP Port (virtual PCI-to-PCI bridge) Silicon Integrated SiS963 [MuTIOL Media IO] CLEVO/KAPOK CB1410 Cardbus Controller hub: Linux 2.6.20-16-generic ohci_hcd OHCI Host Controller Linux 2.6.20-16-generic ohci_hcd OHCI Host Controller Linux 2.6.20-16-generic ohci_hcd OHCI Host Controller Linux 2.6.20-16-generic ehci_hcd EHCI Host Controller memory: Main Memory firewire controller: CLEVO/KAPOK FireWire Controller unknown: FPU DMA controller PIC Timer RTC Keyboard controller /dev/lp0 Parallel controller Silicon Integrated SiS961/2 SMBus Controller PnP Unclassified device PnP Unclassified device PnP Unclassified device PnP Unclassified device PnP Unclassified device PnP Unclassified device PnP Unclassified device PnP Unclassified device PnP Unclassified device PnP Unclassified device PnP Unclassified device Unclassified device Serial controller $ *hwinfo –modem* 16: PCI 02.6: 10204 LinModem (Generic) [Created at pci.281] UDI: /org/freedesktop/Hal/devices/pci_1039_7013 Unique ID: AXjq.2_zl0UorD89 SysFS ID: /devices/pci0000:00/0000:00:02.6 SysFS BusID: 0000:00:02.6 Hardware Class: modem Model: “CLEVO/KAPOK AC’97 Modem Controller” *Vendor: pci 0×1039 “Silicon Integrated Systems Corp.”* *Device: pci 0×7013 “AC’97 Modem Controller”* SubVendor: pci 0×1558 “CLEVO/KAPOK Computer” SubDevice: pci 0×4201 Revision: 0xa0 Device File: /dev/ttySL0 Device Number: char 212:0 I/O Ports: 0×1400-0×14ff (rw) I/O Ports: 0×1080-0×10ff (rw) IRQ: 5 (1367 events) Module Alias: “pci:v00001039d00007013sv00001558sd00004201bc07sc03i00″ Driver Info #0: Driver Status: slamr is not active Driver Activation Cmd: “modprobe slamr” Driver Info #1: Driver Status: snd_intel8×0m is not active Driver Activation Cmd: “modprobe snd_intel8×0m” Driver Info #2: Driver Status: hsfmc97sis is active Driver Activation Cmd: “modprobe hsfmc97sis” Config Status: cfg=new, avail=yes, need=no, active=unknown *$hwinfo –sound* 17: PCI 02.7: 0401 Multimedia audio controller [Created at pci.281] UDI: /org/freedesktop/Hal/devices/pci_1039_7012 Unique ID: 1sCg.DueFQE3euaD SysFS ID: /devices/pci0000:00/0000:00:02.7 SysFS BusID: 0000:00:02.7 Hardware Class: sound Model: “CLEVO/KAPOK AC’97 Sound Controller” *Vendor: pci 0×1039 “Silicon Integrated Systems Corp.”* *Device: pci 0×7012 “AC’97 Sound Controller”* SubVendor: pci 0×1558 “CLEVO/KAPOK Computer” SubDevice: pci 0×0480 Revision: 0xa0 Driver: “Intel ICH” Driver Modules: “snd_intel8×0″ I/O Ports: 0×1c00-0×1cff (rw) I/O Ports: 0×1800-0×187f (rw) IRQ: 5 (516 events) Module Alias: “pci:v00001039d00007012sv00001558sd00000480bc04sc01i00″ Driver Info #0: Driver Status: i810_audio is not active Driver Activation Cmd: “modprobe i810_audio” Driver Info #1: Driver Status: snd_intel8×0 is active Driver Activation Cmd: “modprobe snd_intel8×0″ Config Status: cfg=new, avail=yes, need=no, active=unknown baca lagi disini : http://taufanlubis.wordpress.com/2007/10/09/check-your-hardware-information-using-hwinfo-in-ubuntu/ -- Salam Dwi SP --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Klub Linux Bandung" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/klub-linux-bandung?hl=en -~----------~----~----~----~------~----~------~--~---
