On 4/4/07, DJA <[EMAIL PROTECTED]> wrote:
Bob La Quey wrote:
> Oops. I made an error transscribing the USB data
>
> Here on machine with printer is copy and paste
>
> T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=03f0 ProdID=2b17 Rev= 1.00
> S: Manufacturer=Hewlett-Packard
> S: Product=HP LaserJet 1020
> S: SerialNumber=JL2F39Z
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 98mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
>
> This cut from
> $cat /proc/bus/usb/devices
>
> logs show the firmware downloading successfully.
>
> How do I set lpr printer? lpr -P "whatgoeshere"
lpr -P<printer_queue>
Notice no space between "P" and <printer_queue>
I have no idea what string to put in as "printer_queue" though.
Meanwhile I have found a problem with setting up cupsd to
add a printer that involves pam authentification about which I
know nothing aand really wish not to know anything ...
Sigh,
BobLQ
--
[email protected]
http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list
