IAX will work without having to port forward anything. Use IAX as the protocol in your teliax account. Are you using a soft or hard phone, and does it support IAX?
On Nov 26, 2007 11:45 AM, <[EMAIL PROTECTED]> wrote: > I'm paying for VOIP service from Teliax. So I don't have my > own local Asterisk server. > > Chris > > > On Mon, Nov 26, 2007 at 11:36:13AM -0800, Gil Lamb wrote: > > I suppose you are using asterisk? If so you need to setup some things > > in asterisk on the sip.conf or if your using freepbx then its the > > sip_nat.conf: > > > > [general] > > externip = X.X.X.X ;(substitute your public DNS) > > localnet = 192.168.X.0/255.255.255.0 ;(substitute your lan subnet address) > > nat=yes > > > > On Nov 26, 2007 11:20 AM, <[EMAIL PROTECTED]> wrote: > > > VOIP isn't working where I'm at > > > is because VOIP needs certain outgoing ports open > > > > > > (SIP 10K-20K ; IAX 4569) > > > > > > If I can't control the router to open these ports is there > > > a work around? > > > > > > All I can think of is setting up an SSH tunnel but > > > that would be a pain with my Linksys WRT54G AP. > > > > > > Chris > > > > > > > > > -- > > > [email protected] > > > http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list > > > > > > > > > -- > > [email protected] > > http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list > > > > > -- > > [email protected] > http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list > -- [email protected] http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list
