I never heard of this and noticed it has not been mentioned/uses in the archives
so I'll throw this out.
Has anyone used this tool before or even heard of it?
FYI,
while searching for info on another issue, I ran across a mention to use
the "lshw" command to show info on a wireless card. It might be of interest
as a generic tool instead of lspci type output.
Here's what my wireless and wired cards shows running this as a user:
lshw -C network
WARNING: you should run this program as super-user.
*-network:0
description: Wireless interface
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 2
bus info: [EMAIL PROTECTED]:03:02.0
logical name: eth1
version: 03
serial: xx:xx:xx:xx:xx:xx
width: 32 bits
clock: 33MHz
capabilities: bus_master ethernet physical wireless
configuration: broadcast=yes driver=bcm43xx
driverversion=2.6.22-14-generic latency=64 module=bcm43xx multicast=yes
wireless=IEEE 802.11b/g
*-network:1
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 6
bus info: [EMAIL PROTECTED]:03:06.0
logical name: eth0
version: 10
serial: xx:xx:xx:xx:xx:xx
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical
configuration: broadcast=yes driver=8139too driverversion=0.9.28
ip=192.168.2.60 latency=128 maxlatency=64 mingnt=32 module=8139too multicast=yes
Doug
--
[email protected]
http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list
