This is what I did with my Corvair using an MA-3. ?There was no way it was going to work without doing this. ?The 2.5 scat hose will just barely fit below the carb to my carb heat filter box. I was told the Ellison might have been a better choice with it mounting horizontal.?
Paul ViskBelleville Il618-406-4705 -------- Original message --------From: Dave McCauley via KRnet <krnet at list.krnet.org> Date: 1/13/2016 2:28 PM (GMT-06:00) To: krnet at list.krnet.org Cc: Dave McCauley <davesmccauley at comcast.net> Subject: KR> Nose gear bracket for corvair powered KR I am building a tri-gear Corvair powered KR-Super2 which uses the same nose wheel setup as the KR.? I have a nose gear assembly from a VW powered KR but the bracket is braced directly to the motor mount.? I don't think this works for me.? Does anyone with a Corvair powered tri-gear KR2 or KR2S have a picture of their nose gear mount that I can use as a reference?? Can you send it to me? at? <mailto:davesmccauley at comcast.net> davesmccauley at comcast.net The address of a website with a picture would work as well. Thanks, Dave McCauley _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options -------------- next part -------------- A non-text attachment was scrubbed... Name: 20151212_215807-1_resized.jpg Type: image/jpeg Size: 134842 bytes Desc: not available URL: <http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20160113/c97a13e1/attachment.jpg>
