I would use a mico flox mixture to seal the edges of the holes. Paul ViskBelleville Il618 406 4705
Sent from my Sprint Samsung Galaxy S? 6.-------- Original message --------From: Larry Flesner via KRnet <krnet at list.krnet.org> Date: 3/22/2016 11:29 AM (GMT-06:00) To: KRnet <krnet at list.krnet.org> Cc: Larry Flesner <flesner at frontier.com> Subject: Re: KR> Carbon Fiber speed brake > >I should add to this that given that you are putting holes in it, >plywood core does make perfect sense, and I would laminate it all >together and then cut the holes.? That's a lot easier than the other >way, and it'll work fine. >Mark Langford ++++++++++++++++++++++++++++++++++++++++++++++++++++++ Mine has holes and is a foam core (1/4") so I know the foam with holes will work.? I'm with Mark on "build the board then cut the? holes". Larry Flesner _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
