Thanks Mark. That question Was a little premature. I was thrown by the fact that they sent me material for the verticals that was too small (which I had to reorder) and the vagueness of the plans. Makes sense now. Had an issue with which way the laminate was supposed to go and the size stock they sent me. Long story short, I flubbed that one and will be ordering more stock. This story could go on and on. I did find though that A/S part number for that stock is bigger than what they send with the kit, also if you order it a bit bigger it is cheaper per linear than the smaller stuff. Over 2$ per foot cheaper which ends up being almost $50 for just the fore main spar caps unless I'm missing something there. Anywho, thank you.
Sent from my iPhone > On Jun 22, 2016, at 8:33 PM, Mark Langford via KRnet <krnet at > list.krnet.org> wrote: > > Chad wrote: > >> Quick question. The dimensions for the main spar called out in the >> plans. 2 5/32" top view. Is that to include the birch ply or is that >> the cap only? > > Spar cap only. The "drawing number 12" covers spar and verticals, and > underneath shows the additional web plywood added, with no dimensions, so I > assumed the dimensions applied to caps only. And my spar material came very > close to 2-5/32, so that clinched it for me. > > Mark Langford > ML at N56ML.com > http://www.n56ml.com > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
