offset will work just fine. That's one of the many judgement calls that plans leave out.
Mike Sylvester kr2s builder Birmingham,AL. Cell no.205-966-3854 ________________________________ From: KRnet <krnet-boun...@list.krnet.org> on behalf of Paul Visk via KRnet <krnet@list.krnet.org> Sent: Thursday, January 19, 2017 10:41 PM To: KR EMAIL BOARD Cc: Paul Visk Subject: KR> Aileron hinge bolts I'll be ordering my aileron hardware from Wicks soon. In looking in the book at 10.59. It says to use 8/32 pan head bolts for the aileron hinge. Has anyone had problems with sufficient clearance between the heads of the bolts if they're lined up with each other? Or should they be offset. I believe I've seen some people use countersunk bolts. Any advice would be appreciated. Paul Visk Belleville Il. 618-406-4705 _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. KRNet "Basic" Instructions<http://www.krnet.org/info.html> www.krnet.org Special Instructions for AOL Users. AOL and some other ISPs attempt to control spam through user actions, as well as some automatic controls. Unfortunately, this can ... see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options KRnet Info Page<http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org> list.krnet.org KRnet is a mailinglist devoted to construction and flying the KR series of homebuilt experimental aircraft. To see the collection of prior postings to the list ... To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org