Tim, The plans call for nuts to be floxed to the back side of the spar and then screws put through the spar and screwed into the nuts. Same on the aileron spar. Hope this helps. Rick Wilson. --- Timothy Bellville <soner...@worldnet.att.net> wrote: > Help Guys, > I made a horrible discovery today, and I need some > help. On doing an inspection of the wing outer > panels, I discovered that the original builder had > used SS rivets to mount the piano hinges to the > spars, and one came loose! > > I scanned the plans but could not find anything > about the installation of the aileron, just the > control horn . > What kind of fastener should be used? and how many? > Could someone please go in to detail about this most > critical assembly. > I have spent a great deal of time finishing this > little bird, and hopefully this is no big deal. > At this point, I thought The wings were complete, > ready for paint. > Thanks > Tim Bellville > KR2 > N7038V > Toledo ,Ohio > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html
===== Rick Wilson, Haleyville, Alabama KR2-0200A -99% rwdw2...@yahoo.com __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com
