I am selling a few brand new Westach instruments. I got them while I was trying to diagnose an engine problem and while I was waiting for a custom quad gauge to be built. They were put in the plane for about three weeks until the new quad got here and were temporarily wired and sitting on my seat. They are still in the original boxes and have all of the original instructions and accessories unopened. Here is what I have:
2A2 EGT, 700-1,700 degrees, sender not included (sender is $26.95 at Aircraft Spruce) ACS P/N 2A2, ACS price $39.95, KRnet price $32.00 KA4-6 manifold pressure, 0-30 in/hg, complete with unopened fittings and unused hose ACS P/N K2A4-6. ACS price $39.95, KRnet price $32.00 2C5-56 air/fuel gauge, range 17/1 lean to 12/1 rich This gauge uses any standard automotive oxygen sensor and is much easier to lean with than an EGT. I love it and will never build another plane without an air/fuel ratio gauge. This is an automotive gauge and mount in a 2 1/16" hole from the front of the panel. Oxygen sensor not included. KRnet price $40.00. I also have a few other odds and ends left over. Great Plains Extreme duty oil pump I got this because I have a remote mounted filter and oil cooler and thought I would need the extra pressure. The pressure was to high on my setup so I went down to the severe duty pump. The price is $36.95 new. I have about 30 hours on it and will take $25.00. VW dual port heads, 92mm I ordered a new pair of heads drilled for the second spark plugs because I didn't want to wait two weeks for mine to be machined. Mine have about 130 hours on them. I would have them rebuilt before I used them again. Rocker arms not included. GP price $139.95/ea new, KRnet price $75.00 for the pair. VW custom length pushrod kit. This is a brand new unopened Scat chrome molley pushrod kit. I thought I would need it when I put on the new heads since my existing pushrods were too long, but I had another set already cut that were just the right length. I paid $40.00 at the local VW shop. KRnet price $30.00. VW pushrod tubes These are used and painted red. There are no cracks, but I can't guarantee that one won't crack when they are stretched to be installed again. KRnet price $10.00. Facet fuel pump P/N 40108, 12V, 4-6PSI This one has the AN 3/8" flared ends on it. It is essentially brand new. I was going to use it as a boost pump inline and turn it on for takeoffs and landings, but I didn't get enough flow through the pump to keep the engine running while the pump was off. It is a great transfer pump or a primary pump on an engine that needs a pump on all the time like with an Ellison carb. ACS P/N 40108, ACS price $28.60, KRnet price $20.00.
