> > Right now I am building my outbd fwd spars. I don't understand drawing > >no. 17 where it shows a 12 1/2" piece of plywood being glued to the fwd > face of > >the spar. When I tapered my spar caps for the outbd spars it says not to > >taper until 7" . > > How is the plywood on the fwd face fit at the root If the taper starts 7" > >out? > ++++++++++++++++++++++++++++++++++++++ The KR2S plans call for plywood on the fwd and aft faces. I had no problem glueing the plywood to the faces even though the taper did not start until 7" out. I have some photos on my web site: http://mywebpage.netscape.com/n2w6/wing.html
r/ Bernie KR2S Builder Lexington Park, MD http://mywebpage.netscape.com/n2w6 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > The first 7" flat is for the Wing Attach Fittings. the plywood > will easily transition from the flat and follow the taper when > you glue it in place. I think the 2s plans may call for plywood > the full length on the forward face. Someone with newer > plans will have to answer that. > > Larry Flesner > Carterville, Illinois (My final inspection is TUESDAY !!!) > > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html >
