Check the CD, this was an original problem and was fixed by changing the position of the two cables ?? Virg
On Wed, 18 Feb 2004 15:42:55 +0100 "Serge F. Vidal" <serge.vi...@ate-international.com> writes: > I relay this question on behalf of a French builder, who is stuck. > The issue is the aileron bell crank assembly. > > He says that the two crossing cables (the cable that goes to the > forward > spar pulley and the cable that goes to the second bell crank) are > very close > to each other, and he suspects it should not be the case. > > I checked the drawings to understand the problem. Could you guys > confirm > that he should have 1 inch vertical separation between both cables? > > Serge Vidal > KR2 ZS-WEC > Tunis, Tunisia > > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > Virgil N. Salisbury - AMSOIL www.lubedealer.com/salisbury Miami ,Fl
