Steve McGee wrote:

>> I know I have seen this mentioned before both here and noticed it in web
sites, but have not noticed it in the manual or on the drawings.   I take it
I am missing something here as everyone that has built their plane had to
figure this out.     Langford mentions being high or low from the main
longerons (I forget and don't want to look again) but should be ok because
of blah blah...   Where is this data and how is it measured?  <<

A quick trip to the KRnet archives at
http://www.maddyhome.com/krsrch/index.jsp using the subject of "thrust" will
get you 47 hits on the subject.    The reason there are so many hits is
because there's no mention of it in the plans, and most people have had to
just figure out the blah, blah  part.  One of the many reasons there's a
KRnet, and a KRnet archive...

Mark Langford, Huntsville, Alabama
N56ML "at" hiwaay.net
see KR2S project at http://home.hiwaay.net/~langford



Reply via email to